Guys, I need some help !
I'm lost in which springs to use for the RR :
The manual 31583B says :
Kit includes : 1.7mm-5 turns black.
Option silver 5.5 turns, black 5 turns and gold 4.5 turns.
Kit includes : 1.7mm-6 turns black (not correct, stock is gold!)
Option silver 6.5 turns, black 6 turns and gold 5.5 turns.
This would mean that springs are different for front and rear ??
Is this the case ?? Please advice !
But if you try to find the partnumbers I got lost :
VZ073-3516 • Spring Hard (gold) 3Wx1.6
VZ073-4016 • Spring, medium (black) 4Wx1.6
VZ073-4516 • Spring, soft (silver) 4Wx1.6
(typo on website ?? www.kyosho.de
, guess that the silver is 4.5 ??)
VZ072-xxxx is only V-one RRR ??
Nothing comes close to the turns mentioned earlier in manual.
In the exploded view it gives partnumber vz073-4016 for front, and partnumber vz073-3516 for rear. If you look at options in back of manual both those spings are mentioned as rear.
I'm still driving stock setup looking at springs for more then 2 years. with two cars :-)... but would like to try the difference in making front harder, would love to have some extra turning speed, our track is very flat.
Any help is appriciated !
ps. I did try the springs from a serpent 710 (red hard), perfect fit but got many understeer after this, so those are way too hard I think.
I did also found these new springs.. here they do mention different front and rear... but they talk about 1:10 car with 13mm shock, not specific FW05RR
VZ-242-4516 • Spring, soft (Hellblau)
VZ-242-4517 • Spring, medium (blau)
VZ-242-4518 • Spring, hard (dunkelblau)
VZ-243-4516 • Spring, soft (Hellblau)
VZ-243-5017 • Spring, medium (blau)
VZ-243-5518 • Spring, hard (dunkelblau)
Turns are not mentioned... but seeing the partnumber they are 4.5 turns for front with different thickness and 4.5,5,5.5 turns for rear with also different thickness.