Team Magic G4
#9991
Hey freestyles,
I have an 'S' and use the RS rear sway bar.
All you need are the Baulkheads and the rear arms from the RS for it to work.
Natrually you will need to have the Sway bar and fittings.
On the clutch setting up. Just ensure when all is assembled that you have "some" end play to your clutch bell! Some run more then others. But make sure there is "some" movement!! Otherwise you will blow up your thrust bearing VERY quickly!!
British Menace
I have an 'S' and use the RS rear sway bar.
All you need are the Baulkheads and the rear arms from the RS for it to work.
Natrually you will need to have the Sway bar and fittings.
On the clutch setting up. Just ensure when all is assembled that you have "some" end play to your clutch bell! Some run more then others. But make sure there is "some" movement!! Otherwise you will blow up your thrust bearing VERY quickly!!
British Menace
British Menace
#9992
A good alternative to the RS stabiliser is to do the Mugen sway bar mod.
Its simple and you wont need to buy bulkheads etc.. just Mugen 2.2/2.3/2.4 sway bars and the ball ends and balls to mount it.
Have a look at post #5635 and part numbers on post #3742 of the G4S thread. I have bumped it up
We just file a slot in teh bulkheads for the bar to locate and it works very well.
Its simple and you wont need to buy bulkheads etc.. just Mugen 2.2/2.3/2.4 sway bars and the ball ends and balls to mount it.
Have a look at post #5635 and part numbers on post #3742 of the G4S thread. I have bumped it up
We just file a slot in teh bulkheads for the bar to locate and it works very well.
#9993
Bump
#9996
Tech Regular
A good alternative to the RS stabiliser is to do the Mugen sway bar mod.
Its simple and you wont need to buy bulkheads etc.. just Mugen 2.2/2.3/2.4 sway bars and the ball ends and balls to mount it.
Have a look at post #5635 and part numbers on post #3742 of the G4S thread. I have bumped it up
We just file a slot in teh bulkheads for the bar to locate and it works very well.
Its simple and you wont need to buy bulkheads etc.. just Mugen 2.2/2.3/2.4 sway bars and the ball ends and balls to mount it.
Have a look at post #5635 and part numbers on post #3742 of the G4S thread. I have bumped it up
We just file a slot in teh bulkheads for the bar to locate and it works very well.
I will try to have some pictures of my car.
Have you tried to shave some material from the front blade, to made it softer? It also work great.
Have fun
ALG
#9997
Tech Master
iTrader: (14)
congrats to all TM crew in US
a question about speedshot.. earlier times in this tread we were talking about stiffening speedshot bracket by JB weld... my speedshot just arrived and I saw carbon stiffeners in the holes??? are these carbon parts new or it was always there?? here's the photo;
thanks in advance...
a question about speedshot.. earlier times in this tread we were talking about stiffening speedshot bracket by JB weld... my speedshot just arrived and I saw carbon stiffeners in the holes??? are these carbon parts new or it was always there?? here's the photo;
thanks in advance...
Also that other part looks like it's made of nylon, i thought it's made of carbon fibre?
#9999
the RS is using nylon while the G4+ is using alum.
the carbon fibre part is the speedshot X-plate.
same for RS and G4+ but JS using nylon.
Tech Champion
iTrader: (17)
Like Razzor said! The G4S is still well alive!
He took 1st B-main with a G4S in our last Nationals. on the TRAP track (www.trap.co.za) in Pretoria South Africa!
Second place was was also a G4S if my memory is not to bad
Congrats
He took 1st B-main with a G4S in our last Nationals. on the TRAP track (www.trap.co.za) in Pretoria South Africa!
Second place was was also a G4S if my memory is not to bad
Congrats
Here is pics of mine with a 2.2 bar but am going up to a 2.4 bar.
Tech Master
iTrader: (14)
Bugger i just bought the rear roll bar set up for $20 but if it doesn't work out some how i might try it. What's the part number for that front alloy bulk head brace, the one the top arms are joined to and the carbon brace under it.
Is that called the "speedshot bulkhead brace", pardon my stupid question i'm only catching up to the G4s now
I just ordered the speed shot do i need that alloy piece aswell or will it come with it? I'm sure there will be more stupid questions comming as i'm trying to put together a 1/3 G4s, 1/3 G4rs and 1/3 G4+ so it will be interesting how it turns out. I'm hoping it will be the "super G4"
Is that called the "speedshot bulkhead brace", pardon my stupid question i'm only catching up to the G4s now
I just ordered the speed shot do i need that alloy piece aswell or will it come with it? I'm sure there will be more stupid questions comming as i'm trying to put together a 1/3 G4s, 1/3 G4rs and 1/3 G4+ so it will be interesting how it turns out. I'm hoping it will be the "super G4"