Team Magic G4
#9556
#9557
#9558
#9559
Tech Elite
iTrader: (19)
what you have is a G4 Mongoose.
if you get creative you can make this car quite compettitive. get the G4S steering and drill a hole in the chassis to use it. the one already there isnt lined up for the newer bell crank steering. most G4S/RS upgrades will still fit this car. things like the back shock tower mount and rear top arms from the G4RS . and the ED trans, might need to get the UFO clutch though. but run it with just the steering upgrade and it should do you fine.
#9560
ok guys i'm back with another stupid question.
I have been mezmerized by the bling of the g4+ and i've decided to buy it.
what i need to know is what will i need to purchase to make it run.
I already have a spektrum radio so, i'm thinking
Engine
header and pipe
2 servos
Will i have to buy spur and pinion gears for it? and if so, do you guys have any recommendations as to what to get brand wise for the above and what teeth pinion and spurs?
I'm looking for speed but, i'm also trying to get a racing club started in my area becuase driving in a straight line is only fun for a little while.
thanks for the help and i look forward to driving a TM car very soon.
I have been mezmerized by the bling of the g4+ and i've decided to buy it.
what i need to know is what will i need to purchase to make it run.
I already have a spektrum radio so, i'm thinking
Engine
header and pipe
2 servos
Will i have to buy spur and pinion gears for it? and if so, do you guys have any recommendations as to what to get brand wise for the above and what teeth pinion and spurs?
I'm looking for speed but, i'm also trying to get a racing club started in my area becuase driving in a straight line is only fun for a little while.
thanks for the help and i look forward to driving a TM car very soon.
#9561
Tech Elite
iTrader: (19)
ok guys i'm back with another stupid question.
I have been mezmerized by the bling of the g4+ and i've decided to buy it.
what i need to know is what will i need to purchase to make it run.
I already have a spektrum radio so, i'm thinking
Engine
header and pipe
2 servos
Will i have to buy spur and pinion gears for it? and if so, do you guys have any recommendations as to what to get brand wise for the above and what teeth pinion and spurs?
I'm looking for speed but, i'm also trying to get a racing club started in my area becuase driving in a straight line is only fun for a little while.
thanks for the help and i look forward to driving a TM car very soon.
I have been mezmerized by the bling of the g4+ and i've decided to buy it.
what i need to know is what will i need to purchase to make it run.
I already have a spektrum radio so, i'm thinking
Engine
header and pipe
2 servos
Will i have to buy spur and pinion gears for it? and if so, do you guys have any recommendations as to what to get brand wise for the above and what teeth pinion and spurs?
I'm looking for speed but, i'm also trying to get a racing club started in my area becuase driving in a straight line is only fun for a little while.
thanks for the help and i look forward to driving a TM car very soon.
#9562
PM replied to :-)
#9563
Definately a Mongoose.
As Patto mentioned do the mod for the steering and if i recall there is pics and a tut in the G4S thread for this mod.
With the steering mod done the next thing i would recommend is a UFO or UFO2 clutch with the ED transmission and you will be good to go and compettitive.
Nice thing about teh G4_ range of cars is the cars can be upgraded to current spec or varying degrees to suit different types of tracks.
As Patto mentioned do the mod for the steering and if i recall there is pics and a tut in the G4S thread for this mod.
With the steering mod done the next thing i would recommend is a UFO or UFO2 clutch with the ED transmission and you will be good to go and compettitive.
Nice thing about teh G4_ range of cars is the cars can be upgraded to current spec or varying degrees to suit different types of tracks.
#9564
Tech Elite
iTrader: (19)
well guys here is the latest offerings from K Factory racing products. looks bling as an old friend would say, and looks Expensive. notice new rear lower roll center adjustments in the bulkheads.
http://www.redrc.net/2008/07/k-facto...et/#more-10764
http://www.redrc.net/2008/07/k-facto...et/#more-10764
#9565
WTF???
Paul....have I gone crazy or does your avatar say serpent?
D
Paul....have I gone crazy or does your avatar say serpent?
D
#9566
#9568
that looks interesting
and its a upgrade for all G4 models
and its a upgrade for all G4 models
#9569
anyone want to help me out on my question about needed stuff?
#9570
Tech Master
iTrader: (12)
nc racer !
"what i need to know is what will i need to purchase to make it run."
"I already have a spektrum radio so, i'm thinking"
Get yourself a mini receiver i.e. Spektrum 3100 / 3500 and mount it up near the transponder, or welcome to radio troubles !
"2 servos"
Buy the best you can afford, Sanwa, Futaba, KO Propo etc.....I'd stay away from hitec though ( bad experiences )
"Will i have to buy spur and pinion gears for it? and if so, do you guys have any recommendations as to what to get brand wise for the above and what teeth pinion and spurs?"
they come with gears, you'll need spares - I use 16/52 for first and 20/46 for second almost everywhere, if anything, get some 51 & 52 spurs for first, 45, 46 & 47 for second, but I guess it depends on your engine choice - Picco, Novarossi, Sirio, OS - all good
HTH!
p.s. PATTO !
Next time I see you, I will zip tie you to your pit chair and slap the serpent out of you....hehe!
"what i need to know is what will i need to purchase to make it run."
"I already have a spektrum radio so, i'm thinking"
Get yourself a mini receiver i.e. Spektrum 3100 / 3500 and mount it up near the transponder, or welcome to radio troubles !
"2 servos"
Buy the best you can afford, Sanwa, Futaba, KO Propo etc.....I'd stay away from hitec though ( bad experiences )
"Will i have to buy spur and pinion gears for it? and if so, do you guys have any recommendations as to what to get brand wise for the above and what teeth pinion and spurs?"
they come with gears, you'll need spares - I use 16/52 for first and 20/46 for second almost everywhere, if anything, get some 51 & 52 spurs for first, 45, 46 & 47 for second, but I guess it depends on your engine choice - Picco, Novarossi, Sirio, OS - all good
HTH!
p.s. PATTO !
Next time I see you, I will zip tie you to your pit chair and slap the serpent out of you....hehe!