Serpent 705
#2056
Tech Regular
Originally posted by superk
OVA, I use Yellow front and orange rear....I think I use hole #3 front and #2 rear.
InitialD .... yes you are right.. I drove one way b4 with my electric car. So...I perfectly understand how to drive it...the right way with oneway and yheaaa... it actually teach me to drive a bit smoother in and out of the connor.....I actually set the brakes just enough to slow the car down....it's so light that if I keep on the brakes I won't spin out.....any ways...with the way I drive....i'm going to try front salid diff in.....it just a little easier for me to drive.
OVA, I use Yellow front and orange rear....I think I use hole #3 front and #2 rear.
InitialD .... yes you are right.. I drove one way b4 with my electric car. So...I perfectly understand how to drive it...the right way with oneway and yheaaa... it actually teach me to drive a bit smoother in and out of the connor.....I actually set the brakes just enough to slow the car down....it's so light that if I keep on the brakes I won't spin out.....any ways...with the way I drive....i'm going to try front salid diff in.....it just a little easier for me to drive.
#2058
Tech Regular
Originally posted by PUNISHER
Nizee,
All you have to do is look at my set-up!!
Yeah, I think the yellow springs in the rear will work better on that surface. Also try alittel more toe in the rear for the oversteer or back some steering on your radio.
Nizee,
All you have to do is look at my set-up!!
Yeah, I think the yellow springs in the rear will work better on that surface. Also try alittel more toe in the rear for the oversteer or back some steering on your radio.
#2059
Driver Rumors
Word has it that Marty Barnes is no longer racing for Serpent, He apparently showed up at the McCoy Championships this weekend with a Mugen.
This is the track that the Sedan Nats Are being held at:
Revelation Raceway in Cal.
Sedan A Main
pos Car Laps time name id avg.mph
1 1 141 40:03.30 BARRY BAKER 120 29.60
2 2 139 40:00.99 PEPE VELEZ 127 29.21
3 6 137 40:03.91 GIL LOSI JR 74 28.75
4 8 137 40:17.83 JOSE CASAS 104 28.59
5 4 136 40:11.96 RON ROSSETTI 25 28.45
6 3 135 40:10.69 ROBBIE COLLINS 22 28.25
7 9 135 40:15.78 MEL SALIGUMBA 61 28.20
8 5 132 40:01.67 TONY NEISINGER 5 27.73
9 0 118 40:01.34 ANTHONY DE DUZMAN 58 24.79
10 7 82 26:29.58 LEO VIRTUSIO 47 26.03
This is the track that the Sedan Nats Are being held at:
Revelation Raceway in Cal.
Sedan A Main
pos Car Laps time name id avg.mph
1 1 141 40:03.30 BARRY BAKER 120 29.60
2 2 139 40:00.99 PEPE VELEZ 127 29.21
3 6 137 40:03.91 GIL LOSI JR 74 28.75
4 8 137 40:17.83 JOSE CASAS 104 28.59
5 4 136 40:11.96 RON ROSSETTI 25 28.45
6 3 135 40:10.69 ROBBIE COLLINS 22 28.25
7 9 135 40:15.78 MEL SALIGUMBA 61 28.20
8 5 132 40:01.67 TONY NEISINGER 5 27.73
9 0 118 40:01.34 ANTHONY DE DUZMAN 58 24.79
10 7 82 26:29.58 LEO VIRTUSIO 47 26.03
#2060
Retract
Marty Barnes was racing a Picco !!!!
#2061
Yeah. I heard rumours about that a few weeks ago. I believe he is running Mugen with Picco engines. Not good news for Serpent USA.
#2062
Tech Elite
iTrader: (4)
Originally posted by nizee
Dude....i have already move my toe-in to -3 as what David told me on my main. Until my brake arm came off (forgot to put the screw in ) and my knuckle arm came off frm the pivot ball and have to quit the race. But thanks for pitting for me though...
Dude....i have already move my toe-in to -3 as what David told me on my main. Until my brake arm came off (forgot to put the screw in ) and my knuckle arm came off frm the pivot ball and have to quit the race. But thanks for pitting for me though...
#2063
Well..for my parking lot track...they put some sugar water on the track....I forgot to mension. So..with a slicely ruff serface with sugar water on the track...the car give me alot of puch into the cornor. I did some chage and see alot of improvement on the car. I give more caster to the front and seem like I have more agressive steering into the cornor.
Well...next week ..I'm going to try a bit stiffer setup with the spring and may be go up a little on the shock piston (harder oil) see what the car will do. I think I have a bit too much body roll.
Well...next week ..I'm going to try a bit stiffer setup with the spring and may be go up a little on the shock piston (harder oil) see what the car will do. I think I have a bit too much body roll.
#2064
Originally posted by modellor
Yeah. I heard rumours about that a few weeks ago. I believe he is running Mugen with Picco engines. Not good news for Serpent USA.
Yeah. I heard rumours about that a few weeks ago. I believe he is running Mugen with Picco engines. Not good news for Serpent USA.
I was searching mytsn a week ago for any formal publication but didn't find anything anyone know what happened?
#2065
Cool. I knew he had left Serpent but you know what rumours are like. They are only ever half right . But I knew he was connected to Picco. Its on either the Picco or Paris Racing website.
Not sure of the reason why though.
But lets just say I'll be staying with Serpent next year in 200mm but I will be selling my 705 (fact).
Not sure of the reason why though.
But lets just say I'll be staying with Serpent next year in 200mm but I will be selling my 705 (fact).
#2066
Tech Champion
iTrader: (4)
Set up`s!
I think I have a good set up for you guy`s. First shorten the front wheel base like they do on the 950,next use serpent 35/weight oil in the dampeners,set the fronts at 2 holes&the rears at 3.Mount the front dampeners on the bearing blocks,and the rears on the middle of the shock tower& the bottom of the dampener on the rear arm. 2.5deg. toe in on each rear ,0front toe3% rear camberand 2%front I run no spacer on the rear upright and the one way in the front. For braking try the Mugen teflon brake pads, you have to trim them a bit but it is well worth the time.
I hope this works as well for you as it does for me!
R/C Painter
I hope this works as well for you as it does for me!
R/C Painter
#2068
Originally posted by modellor
Cool. I knew he had left Serpent but you know what rumours are like. They are only ever half right . But I knew he was connected to Picco. Its on either the Picco or Paris Racing website.
Not sure of the reason why though.
But lets just say I'll be staying with Serpent next year in 200mm but I will be selling my 705 (fact).
Cool. I knew he had left Serpent but you know what rumours are like. They are only ever half right . But I knew he was connected to Picco. Its on either the Picco or Paris Racing website.
Not sure of the reason why though.
But lets just say I'll be staying with Serpent next year in 200mm but I will be selling my 705 (fact).
You say you're not racing your 705 so your either going back to the impulse(not) or you have a secret that i want in on,is this another RUMOUR or do you have something solid?
Last edited by EVOLUTION; 06-24-2003 at 01:03 PM.
#2069
Tech Master
iTrader: (2)
I hope Serpent come out with a new 200mm soon!
There are a lot of nice and competitive cars coming out on to the market now days.
It only makes sense for Serpent to come out with a newly design 200mm car to compete with this new cars coming!! Its EVOLUTION in the hobby world!!
As for Marty Barnes, I would to race any kit that someone gives me for a fully sponsorship….Serpent USA is stingy to their sponsors drivers.
There are a lot of nice and competitive cars coming out on to the market now days.
It only makes sense for Serpent to come out with a newly design 200mm car to compete with this new cars coming!! Its EVOLUTION in the hobby world!!
As for Marty Barnes, I would to race any kit that someone gives me for a fully sponsorship….Serpent USA is stingy to their sponsors drivers.
#2070
Well I wont be reverting to an older model for sure. But even if they do bring out a completely new car next year they are not being dishonest about the thing. They never said that the 705 was a new car. They purely made the Impulse better and changed the names to let people differentiate between the different scales (which is stated clearly on the MYTSN website somewhere). All they have done is alter the weight distribution and add on a few 1:8th and 235mm parts to enhance the performance of an already great car to allow it to compete better against the other cars on the track. They even offered a complete upgrade kit for existing Impulse runners.