R/C Tech Forums

Go Back   R/C Tech Forums > General Forums > Nitro On-Road

Reply
 
Thread Tools Search this Thread
Old 06-15-2014, 06:21 AM   #31
Tech Master
 
choisan's Avatar
 
Join Date: Jul 2004
Location: San Francisco Bay Area
Posts: 1,210
Default

ok, my info was from the merchandiser of the manufacturing. he initially said it is available by end July, then said before ifmar.
choisan is online now   Reply With Quote
Old 06-15-2014, 08:40 AM   #32
Tech Master
 
choisan's Avatar
 
Join Date: Jul 2004
Location: San Francisco Bay Area
Posts: 1,210
Default

Ronald made the 1st runner up for the MTX6 prototype, nice.
choisan is online now   Reply With Quote
Old 06-16-2014, 12:42 AM   #33
Tech Master
 
choisan's Avatar
 
Join Date: Jul 2004
Location: San Francisco Bay Area
Posts: 1,210
Default

http://mugenseiki.co.jp/mugen/menueefi.htm

The MTX-6 has been designed with drastic improvements in respects such as steering, traction, durability and overall maintenance.

MTX-6 over view:-Standard issue on the MTX6 are many diverse parts such as: alum rear lower suspension arm* to**mounts, front/rear differential case, front upper arm & arm bracket, front alum bulkhead changesthe 2nd gear pinion and spur gear, high strength front body mount and stronger chassis with manymore new parts that where strengthened too.-A new twin brace system connects to both sides of the 2 speed gear box to the radio plate whichwill almost eliminate flex on the chassis.* This will create better power from the engine to the*drive train.-The MTX6 has improved rigidity around the engine area, smaller holes under the front/reardifferentials which will reduce flex of the chassis and make for better front/rear balance of the car.-The rear bulkhead has new bracing that connects to the 2 speed gear shaft bulkhead and controlsthe twist of both sides of the chassis and improves the efficiency of the whole drive train.-There is a 1mm wider 2nd pinion gear and spur gear for greater durability.-The brake disc is mounted to the 2 speed shaft for more consistent and stronger braking power.-A specially designed front bulkhead to make removal of differential much easier plus an increasein strength.-A new servo saver which will allow for more adjustability for different track condition.-Graphite front/rear shock towers, a new shock spring will greatly improve stability, steering andtraction on all surfaces.-A new clutch spring designed from exotic materials and heat treated to keep constant stabilityin clutch feel over a long periods of racing under high heat temperatures.
choisan is online now   Reply With Quote
Old 06-16-2014, 04:10 AM   #34
Tech Addict
 
shanwright's Avatar
R/C Tech Elite Subscriber
 
Join Date: Jan 2011
Location: Brisbane, Northside
Posts: 743
Trader Rating: 25 (100%+)
Cool Not sure if I'm happy or mad :)

Happy they have made some good changes.
Mad they have so many new parts.
I recon the parts to upgrade a 5 will be nearly the price of a new kit..
Oh well let's see.
Wouldn't it be a nice gesture to do an up grade kit what was less the parts separately but less then the price of the full kit...

Steve H
__________________
Steve Hanwright
Gas Tourer Rep. gt@qrccra.org.au
QRCCRA WEB SITE
EPR FACEBOOK PAGE
EPR ONLINE ENTRIES/RACE RESULTS
shanwright is offline   Reply With Quote
Old 06-16-2014, 05:17 AM   #35
Tech Elite
 
Bishop's Avatar
 
Join Date: May 2004
Location: Brisbane
Posts: 2,208
Trader Rating: 5 (100%+)
Default

Yeah the brake on rear axle was likely cool but a mistake on the 5, the leverage point so far back and the pivoting direction of it meaning it contributed a lot to the large amounts of flex on the mtx5.
I remember Rob at one point did mention some of the issues with brake flex never effected him purely because he said he braked very little in 10th scale.

If you look at all the pictures of the MTX6, it's fairly clear what they have aimed for, one being it's been braced in every way possible in stock kit form, both sides have side bracing, and across bracing, two issues said to cause issues on the 5, brake flex is reduced, and then they have done some work up front likely to increase some steering which the 5 lacked at times.

What is more interesting though, is every brace added, looks removable, meaning any could be removed if you want to dial flex back into the car, Rob said not so long ago at some event he was still basically running a stock MTX5 (eluding there was 6 prototypes at the time), because the 5 was still fast, and suited him just fine.

So the reality is, the 5 was/is fast but maybe a little fragile, the new 6 is Mugens effort to make the car more user to user and club friendly.

Of course saying the 5 is fragile is true of a few of the new cars, which all seem to have gone a bit fragile of late, many say the same of the 8th scales now, I'd say we will likely also see a new MRX6 soon, my bets on that will be also brake moving back to the main shaft, and also making it more durable.
__________________
QRCCRA
www.qrccra.org.au
www.facebook.com/englandparkraceway
www.myrcm.ch/main?pLa=en&hId[1]=org&dId[O]=4331
Bishop is offline   Reply With Quote
Old 06-16-2014, 08:08 AM   #36
Tech Fanatic
 
Seisick's Avatar
 
Join Date: May 2004
Posts: 845
Default

official info has been released
parts lists and prices will be sent to distribuitors this week
glad to see some parts that can be carried on from the mtx5.
__________________
HobbymaniA
GoT MuGeN?

Last edited by Seisick; 06-16-2014 at 10:06 AM.
Seisick is offline   Reply With Quote
Old 06-18-2014, 12:04 PM   #37
Tech Rookie
 
Join Date: Apr 2012
Posts: 13
Default

Quote:
Originally Posted by DS Motorsport View Post
The vertical mounting of the brake lever on the MTX-5 creates an upward bending moment under braking. This bends the chassis, and because there isn't any bracing between the rear bulkheads, two speed bearing blocks and rear radiotray supports the gearbox gears are pushed together and strip.
I'm 99% sure this is the problem with the MTX-5.

With the horizontal mounting of the brake lever there is only an upward bending moment when you're running a lot (too much) brake.

On my Capricorn all the rear bulkheads are disconnected as well, but during braking you don't get the extreme chassis bending as seen on the MTX-5.
Hello DS
I like your explanation about the fact that the vertical lever which activates the brake on MTX5 (because the high, because the length from servo to rear axle) bends a lot the chassis. You are right at 100%.
However, I am not sure this is the reason of the stripping gear problem because the chassis bends always between the radio plate and the clutch. You can make a static test very easily, no need to run, no need to start your engine. First, brake and look where the chassis bends. But the most interesting is this static test : don't brake and turn your clutch with your gears and look how free is your adjustment. Repeat this same operation by braking, so by bending your chassis. You will be very surprise to check that the adjustment stays similar.
What I don't know, it's what happens with the car on the track because the bendings are so numerous during a run and probably in different ways, that may be you are right.
At today, without brace, I don't strip second gears. But for that, I have to follow 2 conditions :
1) the alignment of the engine must to be perfect.
2) your second speed environment (gear, spur and mainly your clutch with the shoes) must to be perfect too. When this environment begins to wear out, in the brakings and the slowings down moments, the second speed will not return enough fast on its posiition "off" and because the first speed will engage, this will break your second spur.
See you soon.
JR28 is offline   Reply With Quote
Old 06-21-2014, 02:00 PM   #38
Tech Regular
 
Join Date: Jul 2005
Posts: 366
Default

http://mugenseiki.co.jp/mugen/spec-mtx6_e.htm
rossb is offline   Reply With Quote
Old 06-29-2014, 09:10 AM   #39
Tech Master
 
spenzalii's Avatar
 
Join Date: Feb 2003
Location: Upper Marlboro, MD
Posts: 1,422
Trader Rating: 2 (100%+)
Send a message via AIM to spenzalii
Default

Looks like holding my 4R for a bit and skipping the 5 may not have been a bad idea. Looking forward to seeing it in action, and saving for the fall release. Gives me something to build over the off season
__________________
This episode is brought to you by the letters M, T, X and the number 4....
spenzalii is offline   Reply With Quote
Old 07-10-2014, 10:05 PM   #40
Tech Master
 
choisan's Avatar
 
Join Date: Jul 2004
Location: San Francisco Bay Area
Posts: 1,210
Default

it is available in Japan now, roughly Yen 56,000. Hong Kong is selling at $4300HKD
choisan is online now   Reply With Quote
Old 07-11-2014, 09:02 AM   #41
Tech Addict
 
shanwright's Avatar
R/C Tech Elite Subscriber
 
Join Date: Jan 2011
Location: Brisbane, Northside
Posts: 743
Trader Rating: 25 (100%+)
Default Hong Kong.

Quote:
Originally Posted by choisan View Post
it is available in Japan now, roughly Yen 56,000. Hong Kong is selling at $4300HKD
Who's got them in HK?
__________________
Steve Hanwright
Gas Tourer Rep. gt@qrccra.org.au
QRCCRA WEB SITE
EPR FACEBOOK PAGE
EPR ONLINE ENTRIES/RACE RESULTS
shanwright is offline   Reply With Quote
Old 07-11-2014, 05:49 PM   #42
Tech Champion
 
GMartinez's Avatar
 
Join Date: Dec 2004
Location: Sunshine State
Posts: 7,916
Trader Rating: 82 (100%+)
Default

Mugen USA will be arriving July 25th
__________________
www.fullthrottlercraceway.com
Home of The U.S. World Nitro Cup
2014 Hosted Events Roar Paved Electric Nationals, IFMAR ISTC Worlds
2015 Roar Fuel On Road Nationals,U.S.World Nitro Cup Completed
2016 U.S. World Nitro Cup Dec 7th - Dec 11th
GMartinez is offline   Reply With Quote
Old 07-12-2014, 10:06 AM   #43
Tech Fanatic
 
Seisick's Avatar
 
Join Date: May 2004
Posts: 845
Default

Option P/N Description New

T2003 MTX6 1/10 Nitro Touring Car
T2104 Middle Shaft Bracket Alum: MTX6/5
T2105 Rear Alum Lower Arm Mount A: MTX6/5
T2106-B Alum Rear Lower Arm Mount B: MTX6 X
T2108 Front Lower Arm Holder (2pcs): MTX6/5
T2109 Front Upright Upper Plate A (2pcs): MTX6/5
T2110 Front Graphite Upright Arm (1pc): MTX6/5
T2111-B Rear Graphite Upper Arm Mount Plate: MTX6/5
O T2112 Front Anti-Roll Bar 2.4mm: MTX6/5
O T2113 Rear Anti-Roll Bar 2.4mm: MTX6/5
T2114 Anti Roll Bar Stopper (2pcs): MTX6/4
T2115 Anti-Roll Bar Link (2pcs): MTX6/5
T2116 Anti-Roll Bar Pivot Ball (2pcs): MTX6/5
T2117 Anti-Roll Bar Adjusting Nut (2pcs): MTX6/5
T2118 Front Lower Suspension Arm L/R: MTX6/5
T2119 Rear Lower Suspension Arm L/R: MTX6/5
T2120-B Front Upper Arm Set: MTX6 X
T2121 Front Upright (1pc): MTX6/5
T2122 Rear Upright (1pc): MTX6/5
T2124-B Lower Arm Mount Bushings/Shims: MTX6 X
T2125 Front Lower Suspension Shaft (2pcs): MTX6/5
T2126 Front Upper Suspension Shaft (2pcs): MTX6/5
T2127 Rear Lower Suspension Shaft (2pcs): MTX6/5
O T2128 Front Graphite Upright Disc Set (2pcs): MTX6/5
O T2129 Rear Graphite Upright Disc Set (2pcs): MTX6/5
T2130 Alum Wheel Hubs (2pcs): MTX6/5
O T2131 Front Upright Upper Plate B (2pcs): MTX6/5
O T2132 Front Upright Upper Plate C (2pcs): MTX6/5
O T2133 Front Anti-Roll Bar 2.2mm: MTX6/5
O T2134 Front Anti-Roll Bar 2.3mm: MTX6/5
O T2135 Front Anti-Roll Bar 2.5mm: MTX6/5
O T2136 Rear Anti-Roll Bar 2.2mm: MTX6/5
O T2137 Rear Anti-Roll Bar 2.3mm: MTX6/5
O T2138 Rear Anti-Roll Bar 2.5mm: MTX6/5
T2139 Front Alum Bulkhead (1pc): MTX6 X
T2140-L Rear Alum Bulkhead L: MTX6 X
T2140-R Rear Alum Bulkhead R: MTX6 X
T2141-L Rear Alum Upper Bulkhead L: MTX6 X
T2141-R Rear Alum Upper Bulkhead R: MTX6 X
T2142-L Gear Shaft Alum Bulkhead L: MTX6 X
T2142-R Gear Shaft Alum Bulhead R: MTX6 X
T2143 Graphite Bulkhead Brace: MTX6 X
O T2144 Front Anti-Roll Bar 2.0mm: MTX6 X
O T2145 Front Anti-Roll Bar 2.1mm: MTX6 X
O T2146 Rear Anti-Roll Bar 2.0mm: MTX6 X
O T2147 Rear Anti-Roll Bar 2.1mm: MTX6 X
O T2148 Alum Pivot Ball (2pcs): MTX6 X
T2201-C Diff Case and Diff Pulley Set: MTX6 X
T2202 Pulley Set: MTX6/5
T2204 Diff Case Gasket (4pcs): MTX6/5
T2206 F/R Diff Cup Outdrive (2pcs): MTX6/5
T2207 Middle Pulley Shaft: MTX6/5
T2208 2-Speed Shaft: MTX6/5
T2211 2-Speed Adapter: MTX6/5
T2212 2-Speed Clutch Shoe: MTX6/5
T2213 1st Gear Housing: MTX6/5
T2214 2nd Gear Housing: MTX6/5
T2222 F/R Universal Joint Set (1pr): MTX6/5
T2223 F/R Axle Shaft (2pcs): MTX6/5
T2224 Spring Set for 2-Speed: MTX6/5
T2225 Joint Pin Set 2x11.8 (10pcs): MTX6/5
T2226 Diff Gear Washer Set (OW 3.5x7.5 x 2pcs)(OW 5x15 x 2pcs): MTX6/5
T2227 Diff Gear Steel 10T (4pcs) 18T (2pcs): MTX6/5
T2228 Diff Cross Shaft Steel (2pcs): MTX6/6
T2229 3X9.6 Joint Pin (10pcs): MTX6/5 X
O T2230 V2 1st Spur Gear 52T: MTX6/5
T2231 V2 1st Spur Gear 53T: MTX6/5
O T2232 V2 1st Spur Gear 54T: MTX6/5
T2236 Belt Tensioner Graphite Plate: MTX6 X
T2237 Pulley Adapter: MTX6 X
O T2238 2nd Spur Gear 47T: MTX6 X
T2239 2nd Spur Gear 48T: MTX6 X
O T2240 2nd Spur Gear 49T: MTX6 X
T2302 Servo Saver Shaft: MTX6/5
T2303-B Servo Saver Arm Set: MTX6 X
T2304 Servo Saver Spring: MTX6/5
T2306-B Servo Saver Upper Mount/Front Body Mount: MTX6 X
T2307 Servo Saver Post for Upper Mount: MTX6/5
T2308-B Radio Box: MTX6 X
T2309 Brake Pad Shaft: MTX6/5
T2310 Graphite Radio Tray: MTX6 X
T2311 Graphite Radio Tray Brace: MTX6 X
T2312 Brake Disc: MTX6 X
T2313 Brake Pad (2pcs): MTX6 X
T2314 Brake Pad & Piston: MTX6 X
T2402 Front Bumper and Body Mounts: MTX6/5
T2403 Sliding Weigh Parts: MTX6/5
T2404 Foam Front Bumer: MTX6/5
O T2405 Front Graphite Body Brace: MTX6/5
O T2406 Rear Graphite Body Brace: MTX6/5
T2408 Chassis: MTX6 X
T2503 Front Graphite Shock Tower: MTX6 X
T2504 Rear Graphite Shock Tower: MTX6 X
T2505 Front Shock Spring (Silver): MTX6 X
T2506 Rear Shock Spring (Silver): MTX6 X
O T2507 Front Spring (Black): MTX6 X
O T2508 Rear Spring (Black): MTX6 X
T2701 Alum Motor Mounts (2pcs): MTX6/5
T2702 Flywheel: MTX6/5
T2703 Centrifugal Clutch Shoe Weights (3pcs): MTX6/5
T2704 Pressure Plate for Clutch: MTX6/5
T2705 Clutch Shoe: MTX6/5
T2707 Thrust Bearing Stopper for Clutch
O T2708 1st Gear Pinion 14T: MTX6/5
T2709 2nd Gear Pinion 15T: MTX6/5
T2713 Taper Cone: MTX6/5
T2716 Clutch Bell: MTX6 X
O T2717 2nd Gear Pinion 19T: MTX6 X
T2718 2nd Gear Pinion 20T: MTX6 X
O T2719 2nd Gear Pinion 21T: MTX6 X
T2720 Clutch Spring: MTX6 X
T2721 Clutch Set Complete: MTX6 X
T2801 Fuel Tank: MTX6/5
T2802 Turnbuckle Tie Rod M4 (2pcs): MTX6 X
T2803 Iniball (4pcs): MTX6 X
T2804 Steering Ball Links L/S (4pcs ea.): MTX6 X
O T2805 Alum Pivot Ball 6mm (10pcs): MTX6 X
T2901 Spring Mount Muffler Stay
H2115 Rear Graphite Lower Damper Stay (1pc): MRX5, MTX6/5
O H2604 H.D. Thrust Bearing (5x10)
H2704 Alum Clutch Spring Adjusting Nut
H2802 Fuel Tank Mount: MRX5, MTX6/5
H2804-B Throttle Linkage Parts: MTX6/5
E2817 P2 O-Ring (10pcs): MTX6 X
D0105-R King Pin Ball (2pcs) X
H0144 King Pin Ball Cup
H0145 Adjusting Nut for Front Upright (2pcs): MRX5, MTX6/5
H0180 Rear Upright Ball (2pcs)
O H0180A-G 3mm Alum Spacer 0.5mm Thick Gray (10pcs) X
O H0181B-G 3mm Alum Spacer 1.0mm Thick Gray (10pcs) X
O H0181C-G 3mm Alum Spacer 2.0mm Thick Gray (10pcs) X
O H0181D-G 3mm Alum Spacer 3.0mm Thick Gray (10pcs) X
O H0187 Titanium King Pin Ball (2pcs)
O H0187/2 Titanium King Pin Ball (6pcs)
T0214 Joint Shaft for Universial (2pcs)
T0215 2x9.8mm Universial Pin (8pcs)
T0247 Front Drive Shaft for Universial (2pcs): MTX6/5/4
E0257 S5 Silicone O-Rings (10pcs)
O T0265 Front Belt (Urethane): MTX6/5/4
O T0266 Rear Belt (Urethane): MTX6/5/4
O T0267 Side Belt (Urethane): MTX6/5/4
T0268 Front Belt (Rubber): MTX6/5/4
T0269 Rear Belt (Rubber): MTX6/5/4
T0270 Side Belt (Rubber): MTX6/5/4
H0293 Belt Tensioner Shaft
E0322 Radio Box Grommet
H0368 Small Rubber Grommet (10pcs)
D0506 Damper Shaft (2pcs)
D0508 Diaphragm (8pcs)
D0509 Damper O-Ring Set
H0510 Damper Piston (4pcs)
H0513 Spring Adjuster Coller w/O-ring (2pcs)
H0554 Damper Cap
O H0558 1.2mm Damper Piston (2pcs)
O H0559 1.3mm Damper Piston (2pcs)
H0562 Damper Case: MRX5/4, MTX6/5
H0563 Oil Seal Cap: MRX5/4, MTX6,5
H0570 New Damper Set (Front/Rear): MRX5, MTX6
H0571 Damper Parts
C0602/2 Ball Bearing (5x8x2.5) 10pcs
D0602 Bearing (6x13x5) 2 pcs
H0603 Bearing Flanged 5x10 (2pcs)
K0603 Ball Bearing (10x15x4) 2pcs
K0603/1 Ball Bearing (10x15x4) 10pcs
C0605 Ball Bearing (6x10x3) 2pcs
H0704 Engine Nut
H0753 Spring Cup
O H0767 Clutch Spring Super Hard
T0801 Steering Tie Rod (2pcs): MTX6
O T0804 Titanium Steering Tie Rod (2pcs): MTX6
D0806 Antenna Tube (2pcs)
H0855 Ball Link 6mm (10pcs)
H0857 Turnbuckle Rod 22mm (2pcs)
H0858 Ball link 6mm Short (10pcs)
O H0863 Titanium Turnbuckle Tie Rod 22mm (2pcs)
H0864-B Fuel Tank Cap X
H0867 Pivot Ball (4pcs)
T0904 Wire for Muffler: MTX6, 5 , 4, 3
O H1006 Rear Spoiler Adjusting Screw
O H1006/1 Rear Spoiler Adjusting Screw (Black)
T1004 MTX6 Instruction Manual X
T1005 MTX6 Decal Sheet X
__________________
HobbymaniA
GoT MuGeN?
Seisick is offline   Reply With Quote
Old 07-22-2014, 05:58 AM   #44
Tech Champion
 
GMartinez's Avatar
 
Join Date: Dec 2004
Location: Sunshine State
Posts: 7,916
Trader Rating: 82 (100%+)
Default

Quote:
Originally Posted by Seisick View Post
Option P/N Description New

T2003 MTX6 1/10 Nitro Touring Car
T2104 Middle Shaft Bracket Alum: MTX6/5
T2105 Rear Alum Lower Arm Mount A: MTX6/5
T2106-B Alum Rear Lower Arm Mount B: MTX6 X
T2108 Front Lower Arm Holder (2pcs): MTX6/5
T2109 Front Upright Upper Plate A (2pcs): MTX6/5
T2110 Front Graphite Upright Arm (1pc): MTX6/5
T2111-B Rear Graphite Upper Arm Mount Plate: MTX6/5
O T2112 Front Anti-Roll Bar 2.4mm: MTX6/5
O T2113 Rear Anti-Roll Bar 2.4mm: MTX6/5
T2114 Anti Roll Bar Stopper (2pcs): MTX6/4
T2115 Anti-Roll Bar Link (2pcs): MTX6/5
T2116 Anti-Roll Bar Pivot Ball (2pcs): MTX6/5
T2117 Anti-Roll Bar Adjusting Nut (2pcs): MTX6/5
T2118 Front Lower Suspension Arm L/R: MTX6/5
T2119 Rear Lower Suspension Arm L/R: MTX6/5
T2120-B Front Upper Arm Set: MTX6 X
T2121 Front Upright (1pc): MTX6/5
T2122 Rear Upright (1pc): MTX6/5
T2124-B Lower Arm Mount Bushings/Shims: MTX6 X
T2125 Front Lower Suspension Shaft (2pcs): MTX6/5
T2126 Front Upper Suspension Shaft (2pcs): MTX6/5
T2127 Rear Lower Suspension Shaft (2pcs): MTX6/5
O T2128 Front Graphite Upright Disc Set (2pcs): MTX6/5
O T2129 Rear Graphite Upright Disc Set (2pcs): MTX6/5
T2130 Alum Wheel Hubs (2pcs): MTX6/5
O T2131 Front Upright Upper Plate B (2pcs): MTX6/5
O T2132 Front Upright Upper Plate C (2pcs): MTX6/5
O T2133 Front Anti-Roll Bar 2.2mm: MTX6/5
O T2134 Front Anti-Roll Bar 2.3mm: MTX6/5
O T2135 Front Anti-Roll Bar 2.5mm: MTX6/5
O T2136 Rear Anti-Roll Bar 2.2mm: MTX6/5
O T2137 Rear Anti-Roll Bar 2.3mm: MTX6/5
O T2138 Rear Anti-Roll Bar 2.5mm: MTX6/5
T2139 Front Alum Bulkhead (1pc): MTX6 X
T2140-L Rear Alum Bulkhead L: MTX6 X
T2140-R Rear Alum Bulkhead R: MTX6 X
T2141-L Rear Alum Upper Bulkhead L: MTX6 X
T2141-R Rear Alum Upper Bulkhead R: MTX6 X
T2142-L Gear Shaft Alum Bulkhead L: MTX6 X
T2142-R Gear Shaft Alum Bulhead R: MTX6 X
T2143 Graphite Bulkhead Brace: MTX6 X
O T2144 Front Anti-Roll Bar 2.0mm: MTX6 X
O T2145 Front Anti-Roll Bar 2.1mm: MTX6 X
O T2146 Rear Anti-Roll Bar 2.0mm: MTX6 X
O T2147 Rear Anti-Roll Bar 2.1mm: MTX6 X
O T2148 Alum Pivot Ball (2pcs): MTX6 X
T2201-C Diff Case and Diff Pulley Set: MTX6 X
T2202 Pulley Set: MTX6/5
T2204 Diff Case Gasket (4pcs): MTX6/5
T2206 F/R Diff Cup Outdrive (2pcs): MTX6/5
T2207 Middle Pulley Shaft: MTX6/5
T2208 2-Speed Shaft: MTX6/5
T2211 2-Speed Adapter: MTX6/5
T2212 2-Speed Clutch Shoe: MTX6/5
T2213 1st Gear Housing: MTX6/5
T2214 2nd Gear Housing: MTX6/5
T2222 F/R Universal Joint Set (1pr): MTX6/5
T2223 F/R Axle Shaft (2pcs): MTX6/5
T2224 Spring Set for 2-Speed: MTX6/5
T2225 Joint Pin Set 2x11.8 (10pcs): MTX6/5
T2226 Diff Gear Washer Set (OW 3.5x7.5 x 2pcs)(OW 5x15 x 2pcs): MTX6/5
T2227 Diff Gear Steel 10T (4pcs) 18T (2pcs): MTX6/5
T2228 Diff Cross Shaft Steel (2pcs): MTX6/6
T2229 3X9.6 Joint Pin (10pcs): MTX6/5 X
O T2230 V2 1st Spur Gear 52T: MTX6/5
T2231 V2 1st Spur Gear 53T: MTX6/5
O T2232 V2 1st Spur Gear 54T: MTX6/5
T2236 Belt Tensioner Graphite Plate: MTX6 X
T2237 Pulley Adapter: MTX6 X
O T2238 2nd Spur Gear 47T: MTX6 X
T2239 2nd Spur Gear 48T: MTX6 X
O T2240 2nd Spur Gear 49T: MTX6 X
T2302 Servo Saver Shaft: MTX6/5
T2303-B Servo Saver Arm Set: MTX6 X
T2304 Servo Saver Spring: MTX6/5
T2306-B Servo Saver Upper Mount/Front Body Mount: MTX6 X
T2307 Servo Saver Post for Upper Mount: MTX6/5
T2308-B Radio Box: MTX6 X
T2309 Brake Pad Shaft: MTX6/5
T2310 Graphite Radio Tray: MTX6 X
T2311 Graphite Radio Tray Brace: MTX6 X
T2312 Brake Disc: MTX6 X
T2313 Brake Pad (2pcs): MTX6 X
T2314 Brake Pad & Piston: MTX6 X
T2402 Front Bumper and Body Mounts: MTX6/5
T2403 Sliding Weigh Parts: MTX6/5
T2404 Foam Front Bumer: MTX6/5
O T2405 Front Graphite Body Brace: MTX6/5
O T2406 Rear Graphite Body Brace: MTX6/5
T2408 Chassis: MTX6 X
T2503 Front Graphite Shock Tower: MTX6 X
T2504 Rear Graphite Shock Tower: MTX6 X
T2505 Front Shock Spring (Silver): MTX6 X
T2506 Rear Shock Spring (Silver): MTX6 X
O T2507 Front Spring (Black): MTX6 X
O T2508 Rear Spring (Black): MTX6 X
T2701 Alum Motor Mounts (2pcs): MTX6/5
T2702 Flywheel: MTX6/5
T2703 Centrifugal Clutch Shoe Weights (3pcs): MTX6/5
T2704 Pressure Plate for Clutch: MTX6/5
T2705 Clutch Shoe: MTX6/5
T2707 Thrust Bearing Stopper for Clutch
O T2708 1st Gear Pinion 14T: MTX6/5
T2709 2nd Gear Pinion 15T: MTX6/5
T2713 Taper Cone: MTX6/5
T2716 Clutch Bell: MTX6 X
O T2717 2nd Gear Pinion 19T: MTX6 X
T2718 2nd Gear Pinion 20T: MTX6 X
O T2719 2nd Gear Pinion 21T: MTX6 X
T2720 Clutch Spring: MTX6 X
T2721 Clutch Set Complete: MTX6 X
T2801 Fuel Tank: MTX6/5
T2802 Turnbuckle Tie Rod M4 (2pcs): MTX6 X
T2803 Iniball (4pcs): MTX6 X
T2804 Steering Ball Links L/S (4pcs ea.): MTX6 X
O T2805 Alum Pivot Ball 6mm (10pcs): MTX6 X
T2901 Spring Mount Muffler Stay
H2115 Rear Graphite Lower Damper Stay (1pc): MRX5, MTX6/5
O H2604 H.D. Thrust Bearing (5x10)
H2704 Alum Clutch Spring Adjusting Nut
H2802 Fuel Tank Mount: MRX5, MTX6/5
H2804-B Throttle Linkage Parts: MTX6/5
E2817 P2 O-Ring (10pcs): MTX6 X
D0105-R King Pin Ball (2pcs) X
H0144 King Pin Ball Cup
H0145 Adjusting Nut for Front Upright (2pcs): MRX5, MTX6/5
H0180 Rear Upright Ball (2pcs)
O H0180A-G 3mm Alum Spacer 0.5mm Thick Gray (10pcs) X
O H0181B-G 3mm Alum Spacer 1.0mm Thick Gray (10pcs) X
O H0181C-G 3mm Alum Spacer 2.0mm Thick Gray (10pcs) X
O H0181D-G 3mm Alum Spacer 3.0mm Thick Gray (10pcs) X
O H0187 Titanium King Pin Ball (2pcs)
O H0187/2 Titanium King Pin Ball (6pcs)
T0214 Joint Shaft for Universial (2pcs)
T0215 2x9.8mm Universial Pin (8pcs)
T0247 Front Drive Shaft for Universial (2pcs): MTX6/5/4
E0257 S5 Silicone O-Rings (10pcs)
O T0265 Front Belt (Urethane): MTX6/5/4
O T0266 Rear Belt (Urethane): MTX6/5/4
O T0267 Side Belt (Urethane): MTX6/5/4
T0268 Front Belt (Rubber): MTX6/5/4
T0269 Rear Belt (Rubber): MTX6/5/4
T0270 Side Belt (Rubber): MTX6/5/4
H0293 Belt Tensioner Shaft
E0322 Radio Box Grommet
H0368 Small Rubber Grommet (10pcs)
D0506 Damper Shaft (2pcs)
D0508 Diaphragm (8pcs)
D0509 Damper O-Ring Set
H0510 Damper Piston (4pcs)
H0513 Spring Adjuster Coller w/O-ring (2pcs)
H0554 Damper Cap
O H0558 1.2mm Damper Piston (2pcs)
O H0559 1.3mm Damper Piston (2pcs)
H0562 Damper Case: MRX5/4, MTX6/5
H0563 Oil Seal Cap: MRX5/4, MTX6,5
H0570 New Damper Set (Front/Rear): MRX5, MTX6
H0571 Damper Parts
C0602/2 Ball Bearing (5x8x2.5) 10pcs
D0602 Bearing (6x13x5) 2 pcs
H0603 Bearing Flanged 5x10 (2pcs)
K0603 Ball Bearing (10x15x4) 2pcs
K0603/1 Ball Bearing (10x15x4) 10pcs
C0605 Ball Bearing (6x10x3) 2pcs
H0704 Engine Nut
H0753 Spring Cup
O H0767 Clutch Spring Super Hard
T0801 Steering Tie Rod (2pcs): MTX6
O T0804 Titanium Steering Tie Rod (2pcs): MTX6
D0806 Antenna Tube (2pcs)
H0855 Ball Link 6mm (10pcs)
H0857 Turnbuckle Rod 22mm (2pcs)
H0858 Ball link 6mm Short (10pcs)
O H0863 Titanium Turnbuckle Tie Rod 22mm (2pcs)
H0864-B Fuel Tank Cap X
H0867 Pivot Ball (4pcs)
T0904 Wire for Muffler: MTX6, 5 , 4, 3
O H1006 Rear Spoiler Adjusting Screw
O H1006/1 Rear Spoiler Adjusting Screw (Black)
T1004 MTX6 Instruction Manual X
T1005 MTX6 Decal Sheet X
now thats a list
__________________
www.fullthrottlercraceway.com
Home of The U.S. World Nitro Cup
2014 Hosted Events Roar Paved Electric Nationals, IFMAR ISTC Worlds
2015 Roar Fuel On Road Nationals,U.S.World Nitro Cup Completed
2016 U.S. World Nitro Cup Dec 7th - Dec 11th
GMartinez is offline   Reply With Quote
Old 07-22-2014, 08:11 AM   #45
Tech Elite
 
Join Date: Oct 2013
Posts: 3,131
Trader Rating: 22 (100%+)
Default

Quote:
Originally Posted by shanwright View Post
Who's got them in HK?
RCM has them in stock now.
__________________
Serpent Viper 977e, Serpent Project 4x, Serpent 811T-TE Truggy, Serpent 811e 2.1, Serpent 411 4.0 Eryx, Serpent SRX-2 RM, Serpent SRX-4, Serpent F110-SF2, Serpent F180, Serpent 748 Natrix WC, Serpent Cobra GT 3.0, Serpent SRX8, Serpent S811 2.2, Baja 5B Flux, Atomic AMZ 1/27th, Schumacher GT12 SS.
Sanwa, Ielasi Tuned Novarossi Racing Engines, Tekin, Hobbywing, Muchmore.
dan_vector is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off



All times are GMT -7. It is currently 05:02 AM.


Powered By: vBulletin v3.9.2.1
Privacy Policy | Terms of Use | Advertise Content © 2001-2011 RCTech.net

SEO by vBSEO 3.5.0