Serpent 960....
07-03-2008, 09:24 AM
#2986
Hello Walt, please pm me with your e-mail and I will send you a spread sheet what I had in stock as of two weeks ago and we can go from there.
Thank you Billy
www.speedworldraceway.com
or if anybody is interested pm or e-mail me with your e-mail.
thanks again
Thank you Billy
www.speedworldraceway.com
or if anybody is interested pm or e-mail me with your e-mail.
thanks again
07-14-2008, 07:02 AM
#2988
Tech Adept
iTrader: (-1)
please Check out Serpent 960 - http://cgi.ebay.com/ws/eBayISAPI.dll...E:B:SS:US:1123
or send me PM if interested.
or send me PM if interested.
07-15-2008, 08:20 AM
#2989
If there is anyone in need I will be at the GLC and will be able to help those that want. Just come see me. I will be there Thursday around noon.
DJ Apolaro
DJ Apolaro
07-23-2008, 03:32 PM
#2990
Serpent is looking strong at the Euro's
07-24-2008, 10:50 AM
#2991
Yes they are! That track looks awsome!
The 960'08 won the Texas Biggie this past weekend as well! Great car! Smooth and predictable!
The 960'08 won the Texas Biggie this past weekend as well! Great car! Smooth and predictable!
07-26-2008, 02:06 PM
#2992
Fantini on the pole in Spain! 960'08 lookin good!
07-27-2008, 03:29 AM
#2994
euro 'live' ?
hi, anyone got any idea if any website will be holding 'live' results especially the finals which will start in approx. 3 hours time ?
many thanks
many thanks
08-01-2008, 10:03 PM
#2995
I just built my 960 and after building quite a few Xray's over the years I'm abit dissappointed with the build. I built an original 960 a few years ago and can't remember having so many problems. The instructions are not actually that clear in a few places.
Anyway, the ball joints for the steering are very tight, I disconnect them and the wheels turn free, so does the servo saver, but as soon as I connect everything its really stiff. The ball joints are way too tight. I may replace them with Xray instead of mucking with them.
The rear wheels won't fit. I press the wheels on and they touch the hub, but the drive pin is just in the rim and the rim still needs to move about 2mm before the quick release will clip on. I'm going to pull it all apart again, but I wonder if I have the OS2 axle or hubs or something.
I guess I'll figure it out soon.
Anyway, the ball joints for the steering are very tight, I disconnect them and the wheels turn free, so does the servo saver, but as soon as I connect everything its really stiff. The ball joints are way too tight. I may replace them with Xray instead of mucking with them.
The rear wheels won't fit. I press the wheels on and they touch the hub, but the drive pin is just in the rim and the rim still needs to move about 2mm before the quick release will clip on. I'm going to pull it all apart again, but I wonder if I have the OS2 axle or hubs or something.
I guess I'll figure it out soon.
08-01-2008, 10:26 PM
#2996
I just built my 960 and after building quite a few Xray's over the years I'm abit dissappointed with the build. I built an original 960 a few years ago and can't remember having so many problems. The instructions are not actually that clear in a few places.
Anyway, the ball joints for the steering are very tight, I disconnect them and the wheels turn free, so does the servo saver, but as soon as I connect everything its really stiff. The ball joints are way too tight. I may replace them with Xray instead of mucking with them.
The rear wheels won't fit. I press the wheels on and they touch the hub, but the drive pin is just in the rim and the rim still needs to move about 2mm before the quick release will clip on. I'm going to pull it all apart again, but I wonder if I have the OS2 axle or hubs or something.
I guess I'll figure it out soon.
Anyway, the ball joints for the steering are very tight, I disconnect them and the wheels turn free, so does the servo saver, but as soon as I connect everything its really stiff. The ball joints are way too tight. I may replace them with Xray instead of mucking with them.
The rear wheels won't fit. I press the wheels on and they touch the hub, but the drive pin is just in the rim and the rim still needs to move about 2mm before the quick release will clip on. I'm going to pull it all apart again, but I wonder if I have the OS2 axle or hubs or something.
I guess I'll figure it out soon.
