Mugen MTX-3
#1111
And I'll be running a full set of UJ's on my Yokomo.
#1112
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
#1113
Originally posted by black-knight
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
you need to shim the rear lower a-arm as there are excessive slop there. the kit supply alloy washer for this purpose but I find it is a bit too thick for this.
Get the front CVD and you will have less trouble on the dog bone end play issue.
#1114
Originally posted by black-knight
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
#1115
Originally posted by VenomWorldOrder
......and the enviable collection continues to grow. did you get it of barry?
......and the enviable collection continues to grow. did you get it of barry?
no i choose not to buy from track side resellers
i bought it from a hobby shop in Australia and at a better price, Dei Rossi Hobbies.
#1116
Originally posted by Manticore
the bag system is a bit messy. all the required parts should be there but a part or two could be in different bags. just search around.
you need to shim the rear lower a-arm as there are excessive slop there. the kit supply alloy washer for this purpose but I find it is a bit too thick for this.
Get the front CVD and you will have less trouble on the dog bone end play issue.
the bag system is a bit messy. all the required parts should be there but a part or two could be in different bags. just search around.
you need to shim the rear lower a-arm as there are excessive slop there. the kit supply alloy washer for this purpose but I find it is a bit too thick for this.
Get the front CVD and you will have less trouble on the dog bone end play issue.
#1117
Tech Addict
Originally posted by black-knight
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
to anyone who has built an MTX3....any building tips or glitches's during construction? i'm about to start building my kit...
i sold and delivered my Serpent today so its the toss of the coin now Serpent 705 or mugen MTX3????
#1118
Tech Rookie
rtu
i see u have an dennis richey rtu i have heard alot about them are they a good performing engine
#1119
Originally posted by David
BK
i sold and delivered my Serpent today so its the toss of the coin now Serpent 705 or mugen MTX3????
BK
i sold and delivered my Serpent today so its the toss of the coin now Serpent 705 or mugen MTX3????
Ive chosen the MTX3, and i have no association with importer etc, it was my choice off my own bat, so to say. I could have driven other brands at very good prices but, i want to enjoy my nitro racing and have a car that works for me.
#1121
Tech Rookie
ive got some but i dont no how to post them up
#1122
Originally posted by terrin
ive got some but i dont no how to post them up
ive got some but i dont no how to post them up
#1123
here
#1124
2
#1125
3