Derby Bros Racing

iTrader: (7)

it may be good just so parts you like from kawahara will be more readily available.

but in my opinion, this will just confuse the quality of products and you may not know which one is really designed by mugen... or maybe the part youre getting is from kawahara. you know what i mean?

im not saying that kawahara parts are not good, some of them really works, but i still hope they label which ones are kawaharas and which ones are the mugens. because to me personally, mugen engineers are better than kawaharas.

Manticore

it is a good news for you as you may get kawahara parts faster then before.

freefallgirl

Hello boy's.. Just wanted to say Happy Holiday's to you all...
FFM is still in Iraq so please say a prayer for him. He's been gone for 20 day's and i still havent heard from him. Wish you guy's a great New Years too! Semper Fi !! R.

ilaybrk

mugen tells me no pro mtx3 can it be got from HK

Cartman

last time i looked HK was not in europe!

Corse-R

Seemed to remember that has been discussed in this thread, but in spite for the newcomers (and not...).

Does anyone, has the parts list for building a complete rear diff? Please... correct/add part nos for a omplete build.

C0228 - Planetary/satellite gears.
T0220 - Diff housing.
... - Outdrives.

....????

Need to rebuild completely one and need to put new outdrives in one. So part nos will be handy.

stefan

T0202 diff. cup joint
T0207 diff. gasket
T0215 joint pin
C0227 diff. spacers

theRED5

Thanks FFG!! And back atcha'. Our best and most prized are those that defend us, and for that, I thank them, and will say a prayer for yours.

theRED5

Almost forgot.

OOO-RAAAHHHH ! ! !

Manticore

those from HK are local combo, not from mugen !

Manticore

FFG ! call me man !

I wish to hear from FFM too ! i wish everything goes well with him ! but dont worry, he is da man !

spawn

iTrader: (6)

I need help with the centax!. what are the adjustments you guys use on the centax? I am currently using .6mm. I find that the engagement is too soon. Also is it better to change to harder springs and the red clutch pad?? it is a bit difficult to drive when the clutch engages too soon.

Manticore

0.6mm causes your clutch engage too soon? rephase your situation.

spawn

iTrader: (6)

well I followed the manual and the adjustment of the clutch nut is .6mm from the end. Clutch engages at less than 1/3 throttle.

Manticore

clutch engage at 1/3 throttle is late , not early .

you will over rev your engine. proper setting is around 0.3mm instead