Mugen MTX-3
#5416
Re: Re: My entry for the "Hop-up king contest"
Originally posted by eddiethefish
urrr... Why Al pulleys? Despite of using MRX-3 front belt, Kawahara belts or Mugen MTX-3 belts, they'll get snapped and cut by these sharp-teeth pulleys eventually.
But, I still give your car 9.5. Guess the cleanliness helps you lots with the score.
urrr... Why Al pulleys? Despite of using MRX-3 front belt, Kawahara belts or Mugen MTX-3 belts, they'll get snapped and cut by these sharp-teeth pulleys eventually.
But, I still give your car 9.5. Guess the cleanliness helps you lots with the score.
These AL pulleys have been on the car for 3 month now and have been run in 30 minute mains almost every Sunday and so far, they look like new.
I had one belt snap on me yet and that was with the plastic pulleys.
Also, Manti, all the 3R parts I have on this car work absolutely flawless
#5417
Re: Centex for MTX-2/3
Originally posted by speedy100
does anyonw know if the MTX-2 centex is identical to MTX-3 ? are they compatiable ? thanks
does anyonw know if the MTX-2 centex is identical to MTX-3 ? are they compatiable ? thanks
#5418
Originally posted by eddiethefish
You may compare K factory with 3Racing, but please leave my Team Active alone!
You may compare K factory with 3Racing, but please leave my Team Active alone!
#5419
Tech Fanatic
Re: Re: Centex for MTX-2/3
Originally posted by eddiethefish
Everything else but the flywheel is recycle-able.
Everything else but the flywheel is recycle-able.
#5420
Tech Fanatic
Re: Re: Re: Centex for MTX-2/3
Originally posted by speedy100
is that mean i can put the MTX2 centex to MTX3 ?
is that mean i can put the MTX2 centex to MTX3 ?
#5421
Re: Re: Re: Centex for MTX-2/3
Originally posted by speedy100
is that mean i can put the MTX2 centex to MTX3 ?
is that mean i can put the MTX2 centex to MTX3 ?
#5422
Re: Re: Re: Re: Centex for MTX-2/3
Originally posted by speedy100
Manti, any comment to the MTX2 centex to be used in MTX3 ? thanks...
Manti, any comment to the MTX2 centex to be used in MTX3 ? thanks...
#5423
Re: Re: Re: Re: Re: Centex for MTX-2/3
Originally posted by Manticore
you need to shim the engine mount a bit taller as the MTX2 flywheel is bigger.
you need to shim the engine mount a bit taller as the MTX2 flywheel is bigger.
#5424
Originally posted by eddiethefish
US$ is getting stronger; the gold will be cheaper eventually.
US$ is getting stronger; the gold will be cheaper eventually.
Last edited by Corse-R; 06-16-2003 at 03:51 AM.
#5425
Originally posted by eddiethefish
You may compare K factory with 3Racing, but please leave my Team Active alone!
You may compare K factory with 3Racing, but please leave my Team Active alone!
BTW All: Today went out the second batch of belts to all the people who requested, many places to go.... Malaysia, NC, VA, Dublin, HK, Sweden.... Enjoy them (mine did).
Some pics of the conversion. Look on this photo how far remains the belt from the hot manifold. Photo reduction made by Manticore remote imaging systems
#5426
#2
Photo reduction made by Manticore remote imaging systems
Photo reduction made by Manticore remote imaging systems
#5427
#3
General view of the conversion installed. Seems almost stock (he he he....)
Photo reduction made by Manticore remote imaging systems
General view of the conversion installed. Seems almost stock (he he he....)
Photo reduction made by Manticore remote imaging systems
#5428
#4
View of the original 19/24 belt scheme.
Photo reduction made by Manticore remote imaging systems
View of the original 19/24 belt scheme.
Photo reduction made by Manticore remote imaging systems
#5429
#5
A view of the stock and 16/19 pulley assemblies. Upper side 16/19 pulleys and belt, lower 19/24 and belt.
Photo reduction made by Manticore remote imaging systems
A view of the stock and 16/19 pulley assemblies. Upper side 16/19 pulleys and belt, lower 19/24 and belt.
Photo reduction made by Manticore remote imaging systems
#5430
Originally posted by Corse-R
#5
A view of the stock and 16/19 pulley assemblies. Upper side 16/19 pulleys and belt, lower 19/24 and belt.
Photo reduction made by Manticore remote imaging systems
#5
A view of the stock and 16/19 pulley assemblies. Upper side 16/19 pulleys and belt, lower 19/24 and belt.
Photo reduction made by Manticore remote imaging systems
Does the car drive any differently?