Mugen MTX-3
#3856
Manticore,
Where did you get the 2 sway bar retainers? The 2 things that hold the bar in place.
What brand? Where can I purchase?
Thanks,
Puma
Where did you get the 2 sway bar retainers? The 2 things that hold the bar in place.
What brand? Where can I purchase?
Thanks,
Puma
#3857
Originally posted by puma1824
Manticore,
Where did you get the 2 sway bar retainers? The 2 things that hold the bar in place.
What brand? Where can I purchase?
Thanks,
Puma
Manticore,
Where did you get the 2 sway bar retainers? The 2 things that hold the bar in place.
What brand? Where can I purchase?
Thanks,
Puma
#3858
Tech Adept
does harmony ship to the US, if so how are the prices and are major credit cards accepted? also, even though this has been covered, website??
#3859
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by VenomWorldOrder
hahaha that's the BEST!
hahaha that's the BEST!
the only thing that needs fixing when you own a Mugen,from reading this forum,is your wallet...
#3860
Originally posted by fastharry
the only thing that needs fixing when you own a Mugen,from reading this forum,is your wallet...
the only thing that needs fixing when you own a Mugen,from reading this forum,is your wallet...
I can see you have changed your signature? no more bashing to NTC3 newbie now?
#3861
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
I figure since the newbies aren't complaining,why bring it up....
#3862
Originally posted by fastharry
I figure since the newbies aren't complaining,why bring it up....
I figure since the newbies aren't complaining,why bring it up....
#3863
Originally posted by TSR6
All MTX-3 owners will enjoy this: latest press release on the NTC3 "The Fix" issue
All MTX-3 owners will enjoy this: latest press release on the NTC3 "The Fix" issue
http://www.rctech.net/forum/attachme...&postid=368757
#3864
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by Manticore
is that you on the picture Harry?
http://www.rctech.net/forum/attachme...&postid=368757
is that you on the picture Harry?
http://www.rctech.net/forum/attachme...&postid=368757
good comeback...and being Armenian,that picture's not far from the truth..only armenians are Christians,not Muslims...
I'm actually in NJ....
all you Mugen guys ought to make it to Edison NJ....June 7th and 8th...
you will have a good time with the edison car club running touring cars.....
of coarse,don't forget extra belts...the mains are 30 minutes
#3865
Originally posted by fastharry
thats pretty good...
good comeback...and being Armenian,that picture's not far from the truth..only armenians are Christians,not Muslims...
I'm actually in NJ....
all you Mugen guys ought to make it to Edison NJ....June 7th and 8th...
you will have a good time with the edison car club running touring cars.....
of coarse,don't forget extra belts...the mains are 30 minutes
thats pretty good...
good comeback...and being Armenian,that picture's not far from the truth..only armenians are Christians,not Muslims...
I'm actually in NJ....
all you Mugen guys ought to make it to Edison NJ....June 7th and 8th...
you will have a good time with the edison car club running touring cars.....
of coarse,don't forget extra belts...the mains are 30 minutes
I dont care where you from. none of my business again Harry !
#3866
Rear Roll Center
I'm very accustomed to setting up electric touring cars, and something about the MTX-3 that I don't get. Most electric cars have a lower rear roll center. With the stock set-up for the mtx-3 the car is still loose. Why is the rear inside camber link SO REALLY low on the car. The rear of this thing does need to roll more. I hate having to stiffen the front end to compensate for the high roll center in the rear. I just don't wanna give up my steering and make this thing push. Can anybody explain why the roll centers are so high on the rear of these gas cars? Is it the high speed corners?
On another note. If you ever need to replace the front belt on the MTX-3. TRY Mugen part number D0240. It's a 6mm belt for the MRX. It fits perfectly.
On another note. If you ever need to replace the front belt on the MTX-3. TRY Mugen part number D0240. It's a 6mm belt for the MRX. It fits perfectly.
#3867
Re: Rear Roll Center
Originally posted by Rayj
On another note. If you ever need to replace the front belt on the MTX-3. TRY Mugen part number D0240. It's a 6mm belt for the MRX. It fits perfectly.
On another note. If you ever need to replace the front belt on the MTX-3. TRY Mugen part number D0240. It's a 6mm belt for the MRX. It fits perfectly.
-Puma
#3868
Tech Initiate
Harry, where do you guys run?. i work in Edison and have to check it out
#3869
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
http://www.edisonmodelr-ccarclub.com/
thats the name of the club......I don't belong,I went down to race with the tc3..(4th a main)
heres the rules..
On Road Fuel
Edison Model RC Club
Edison, NJ
2003 Racing Schedule
Race Site - Middlesex County College, 2600 Woodbridge Ave, Edison, NJ
Parking Lot 6A
Local Motel: Wellesley Inn 732-287-0171 OR Sheraton
732-225-8300
For info call Joe (Hose) Szebenyi 732-819-8693
Email
[email protected]
Web site: www.edisonmodelr-
ccarclub.com
April 27, 2003 Spring Warm Up – Test and Tune*
Classes To Be Run
May 3-4, 2003 Club Race #1
1/8th 4WD Open
June 7-8, 2003 Club Race #2
1/8th 4WD Sportsman
June 21-22, 2003 Rain Date (Only)
1/10th .15 4WD Sebring
July 12-13, 2003 Club Race #3
1/10th .12 4WD Sebring
August 2-3, 2003 Club Race #4
September 6-7, 2003 NJ State Championship
October 18-19, 2003 Club Race #5
Edison Club race format will be – Saturday’s track set up 8:00 AM
followed by practice until 11:30 (time permitting). Qualifying starts
at 12:00 PM - 2 rounds of qualifying.
Sunday’s – practice starts at 9:00 AM – 10:00 AM. 1 round of
qualifying followed by mains.
Entry fee is $30.00. Registration closes at 10:00 AM on Saturday.
There will be a point series followed by year end trophies. The
points will be available on the Edison Model RC Club web site.
*Test and Tune day will be from 9:00 AM – 5:00 PM the fee will be
$20.00
We encourage that all racers please help with track set up at 8:00 AM
on Saturday and track tear down after racing on Sunday. Please
remember that this is a club atmosphere we appreciate all of your help
with making this a successful race season.
The use of personal transponders are encouraged.
Club Rules
1/8th Open – This is a class for seasoned drivers. Entry to this
class is decided by the race director. To make this class during the
season you either have to win 2 consecutive sportsman A mains or win
the sportsman points series.
1/8th Sportsman - This class is for less experienced drivers. You
can use any body that you desire.
1/10th Sebring – This class will run both .12 4WD and .15 4WD with
touring car bodies.
• .12 cars must use .12 engines and pipes and the tires
must fit under the body
• .15 cars must use .15 engines and pipes and the tires
must fit under the body
The Sebring cars will run together in the same heats and be scored
together for the end of the year trophy’s.
Drivers must marshal at the conclusion of their race and wear the
orange vests designated for the marshalling position. If you are not
at your marshalling spot during qualifying or your main you will be
disqualified 1 lap as a penalty.
All cars must be put into impound immediately following your heat.
All radio’s must be in radio impound before the start of qualifying
and must be returned after each heat/main
and remain until the conclusion of racing.
You will be given a sticker to place on your radio with your name and
ID number after the computer has been set up for the qualifying rounds.
All drivers must hold a valid roar card. Roar membership sign-up is
available at the track. Your pit person must also have a valid roar
card.
Drivers are required to clean up pit area which includes tire cutting,
cigarettes butts, parts wrappers, body pieces, etc. Brooms and dust
pans are available.
We encourage that all racers please help with track set up at 8:00 AM
on Saturday and track tear down after racing on Sunday. Please
remember that this is a club atmosphere we appreciate all of your help
with making this a successful race season.
No fuel bottles in the pits during practice.
No marshalling from the pits.
Radio’s that are not in impound will cause you to be disqualified for
the day.
No practice in the parking lot.
Driver etiquette is encouraged, no ruff driving, wild driving, and
yelling from the drivers stand at racers or marshals.
thats the name of the club......I don't belong,I went down to race with the tc3..(4th a main)
heres the rules..
On Road Fuel
Edison Model RC Club
Edison, NJ
2003 Racing Schedule
Race Site - Middlesex County College, 2600 Woodbridge Ave, Edison, NJ
Parking Lot 6A
Local Motel: Wellesley Inn 732-287-0171 OR Sheraton
732-225-8300
For info call Joe (Hose) Szebenyi 732-819-8693
[email protected]
Web site: www.edisonmodelr-
ccarclub.com
April 27, 2003 Spring Warm Up – Test and Tune*
Classes To Be Run
May 3-4, 2003 Club Race #1
1/8th 4WD Open
June 7-8, 2003 Club Race #2
1/8th 4WD Sportsman
June 21-22, 2003 Rain Date (Only)
1/10th .15 4WD Sebring
July 12-13, 2003 Club Race #3
1/10th .12 4WD Sebring
August 2-3, 2003 Club Race #4
September 6-7, 2003 NJ State Championship
October 18-19, 2003 Club Race #5
Edison Club race format will be – Saturday’s track set up 8:00 AM
followed by practice until 11:30 (time permitting). Qualifying starts
at 12:00 PM - 2 rounds of qualifying.
Sunday’s – practice starts at 9:00 AM – 10:00 AM. 1 round of
qualifying followed by mains.
Entry fee is $30.00. Registration closes at 10:00 AM on Saturday.
There will be a point series followed by year end trophies. The
points will be available on the Edison Model RC Club web site.
*Test and Tune day will be from 9:00 AM – 5:00 PM the fee will be
$20.00
We encourage that all racers please help with track set up at 8:00 AM
on Saturday and track tear down after racing on Sunday. Please
remember that this is a club atmosphere we appreciate all of your help
with making this a successful race season.
The use of personal transponders are encouraged.
Club Rules
1/8th Open – This is a class for seasoned drivers. Entry to this
class is decided by the race director. To make this class during the
season you either have to win 2 consecutive sportsman A mains or win
the sportsman points series.
1/8th Sportsman - This class is for less experienced drivers. You
can use any body that you desire.
1/10th Sebring – This class will run both .12 4WD and .15 4WD with
touring car bodies.
• .12 cars must use .12 engines and pipes and the tires
must fit under the body
• .15 cars must use .15 engines and pipes and the tires
must fit under the body
The Sebring cars will run together in the same heats and be scored
together for the end of the year trophy’s.
Drivers must marshal at the conclusion of their race and wear the
orange vests designated for the marshalling position. If you are not
at your marshalling spot during qualifying or your main you will be
disqualified 1 lap as a penalty.
All cars must be put into impound immediately following your heat.
All radio’s must be in radio impound before the start of qualifying
and must be returned after each heat/main
and remain until the conclusion of racing.
You will be given a sticker to place on your radio with your name and
ID number after the computer has been set up for the qualifying rounds.
All drivers must hold a valid roar card. Roar membership sign-up is
available at the track. Your pit person must also have a valid roar
card.
Drivers are required to clean up pit area which includes tire cutting,
cigarettes butts, parts wrappers, body pieces, etc. Brooms and dust
pans are available.
We encourage that all racers please help with track set up at 8:00 AM
on Saturday and track tear down after racing on Sunday. Please
remember that this is a club atmosphere we appreciate all of your help
with making this a successful race season.
No fuel bottles in the pits during practice.
No marshalling from the pits.
Radio’s that are not in impound will cause you to be disqualified for
the day.
No practice in the parking lot.
Driver etiquette is encouraged, no ruff driving, wild driving, and
yelling from the drivers stand at racers or marshals.
#3870
Re: Rear Roll Center
Originally posted by Rayj
I'm very accustomed to setting up electric touring cars, and something about the MTX-3 that I don't get. Most electric cars have a lower rear roll center. With the stock set-up for the mtx-3 the car is still loose. Why is the rear inside camber link SO REALLY low on the car. The rear of this thing does need to roll more. I hate having to stiffen the front end to compensate for the high roll center in the rear. I just don't wanna give up my steering and make this thing push. Can anybody explain why the roll centers are so high on the rear of these gas cars? Is it the high speed corners?
On another note. If you ever need to replace the front belt on the MTX-3. TRY Mugen part number D0240. It's a 6mm belt for the MRX. It fits perfectly.
I'm very accustomed to setting up electric touring cars, and something about the MTX-3 that I don't get. Most electric cars have a lower rear roll center. With the stock set-up for the mtx-3 the car is still loose. Why is the rear inside camber link SO REALLY low on the car. The rear of this thing does need to roll more. I hate having to stiffen the front end to compensate for the high roll center in the rear. I just don't wanna give up my steering and make this thing push. Can anybody explain why the roll centers are so high on the rear of these gas cars? Is it the high speed corners?
On another note. If you ever need to replace the front belt on the MTX-3. TRY Mugen part number D0240. It's a 6mm belt for the MRX. It fits perfectly.
we dont have much problem with the front belt but you did give us a great option of a wider belt.