Mugen MTX-3
#2206
Tech Adept
1st Problem
Hi Guys,
I had the 3 out today for a good spin.
It was the first time I had opened her up on my local track.
The 2 speed clutch bell (TO236) bearing started to work loose causing the 43T & 47T gears to touch. There's normally a gap between them.
Has anybody else experienced this?
I'm going to try thread lock or a small tap with a center punch on the outer clutch bearing housing to try & stop it from moving.
Overall the car handles extremly well. I was trying different combos of rubber tyres which worked quite well on a COLD Irish morning.
All the best
I had the 3 out today for a good spin.
It was the first time I had opened her up on my local track.
The 2 speed clutch bell (TO236) bearing started to work loose causing the 43T & 47T gears to touch. There's normally a gap between them.
Has anybody else experienced this?
I'm going to try thread lock or a small tap with a center punch on the outer clutch bearing housing to try & stop it from moving.
Overall the car handles extremly well. I was trying different combos of rubber tyres which worked quite well on a COLD Irish morning.
All the best
#2207
Tech Fanatic
Re: 1st Problem
Originally posted by click, dublin
Hi Guys,
I had the 3 out today for a good spin.
It was the first time I had opened her up on my local track.
The 2 speed clutch bell (TO236) bearing started to work loose causing the 43T & 47T gears to touch. There's normally a gap between them.
Has anybody else experienced this?
I'm going to try thread lock or a small tap with a center punch on the outer clutch bearing housing to try & stop it from moving.
Overall the car handles extremly well. I was trying different combos of rubber tyres which worked quite well on a COLD Irish morning.
All the best
Hi Guys,
I had the 3 out today for a good spin.
It was the first time I had opened her up on my local track.
The 2 speed clutch bell (TO236) bearing started to work loose causing the 43T & 47T gears to touch. There's normally a gap between them.
Has anybody else experienced this?
I'm going to try thread lock or a small tap with a center punch on the outer clutch bearing housing to try & stop it from moving.
Overall the car handles extremly well. I was trying different combos of rubber tyres which worked quite well on a COLD Irish morning.
All the best
#2208
Tech Master
Re: Some images of real stopping power (2/2)
Originally posted by Corse-R
Awaiting for 'Manti Approved' stickers.
Awaiting for 'Manti Approved' stickers.
#2209
Tech Adept
Hi Mark,
Not sure. I'm also involved in running a Supermoto team so I'm sure some of the dates will clash.
My local track is also running a championship.
I might make a few rounds in Saint Annes Park, they have a nice track built for 1/8th but I think they plan on making some modifications to the track this year.
I'm sure out paths will cross at some stage!!
All the best
Not sure. I'm also involved in running a Supermoto team so I'm sure some of the dates will clash.
My local track is also running a championship.
I might make a few rounds in Saint Annes Park, they have a nice track built for 1/8th but I think they plan on making some modifications to the track this year.
I'm sure out paths will cross at some stage!!
All the best
#2210
Re: Re: Some images of real stopping power (2/2)
Originally posted by Ah10
here is some serious stopping power! sorry couldnt resist!
here is some serious stopping power! sorry couldnt resist!
Some people were there with their 'autobuses' almost all were Technokit 99E and a lonely FG Comp cars, got some laps with one of them and are quite different to drive (are quite picky due to their weight and inertia) but very funny to pass them on the backstraight making a little slalom
#2211
Tech Adept
I must say, although i know racing is racing, and that anything can happen, i was kinda dissapointed when kenji took second. i am so sick of hearing about that ntc3 and that stupid team. does anyone have more info on the race? other than mytsn
#2212
Tech Adept
1st Problem
i had the same problem.i think its due to banging into the walls on my side.i just popped it back in and good to got again.
#2213
Tech Master
iTrader: (21)
MTX3 parts
Hey Guys
Another good place to look for hopup parts.
http://www.maxtech.com.au/3racing/mugen/mugen.htm.
Another good place to look for hopup parts.
http://www.maxtech.com.au/3racing/mugen/mugen.htm.
#2214
Re: MTX3 parts
Originally posted by tl2111
Hey Guys
Another good place to look for hopup parts.
http://www.maxtech.com.au/3racing/mugen/mugen.htm.
Hey Guys
Another good place to look for hopup parts.
http://www.maxtech.com.au/3racing/mugen/mugen.htm.
you might want to check 3racing homepage
www.3racing.com.hk
#2215
Tech Elite
iTrader: (52)
Re: Re: MTX3 parts
Originally posted by Manticore
the link is not working
you might want to check 3racing homepage
www.3racing.com.hk
the link is not working
you might want to check 3racing homepage
www.3racing.com.hk
Anyone tried the 3Racing Light weight flywheel. Much weight difference?
#2217
Tech Master
iTrader: (21)
Re: MTX3 parts
Originally posted by tl2111
[B]Hey Guys
Another good place to look for hopup parts.
http://www.maxtech.com.au/3racing/mugen/mugen.htm.
[B]Hey Guys
Another good place to look for hopup parts.
http://www.maxtech.com.au/3racing/mugen/mugen.htm.
http://www.maxtech.com.au/3Racing/Mugen/mugen.htm
#2218
Re: Re: Re: Re: MTX3 parts
Originally posted by tl2111
i have it, about 5g lighter then the original.
i have it, about 5g lighter then the original.
Be warned before lightening a flywheel, can drive you crazy tunning your engines.
#2219
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by Nytrochaos
I must say, although i know racing is racing, and that anything can happen, i was kinda dissapointed when kenji took second. i am so sick of hearing about that ntc3 and that stupid team. does anyone have more info on the race? other than mytsn
I must say, although i know racing is racing, and that anything can happen, i was kinda dissapointed when kenji took second. i am so sick of hearing about that ntc3 and that stupid team. does anyone have more info on the race? other than mytsn
yeah sure...
heres Mike Meyers(Serpents reporter) on the Starting Grid forums....
There will be a lot more information in my article on the Winternats,
but I had a long conversation with Barry Friday night in his hotel
room. Basically, Barryh told me that he was here by himself, "a team
of one", and that while he only qualified 4th, he was convinced that he
had the best car at the event, in no small part to Steve O'Donnell. Of
course, me, listening to what a lot of people said, wondered how much
of what Barry was telling me was "hype" and how much was true. Barry
sure did sound very convincing though.
I wasn't at the event during qualifying. When I arrived, I heard
stories of how Kenji's car was so fast that people were sure it would
fail the tech inspection - but it was completely legal! Barry
meanwhile was telling me not to pay that much attention to qualifying,
but to consider that he had a car that worked great, and more
horsepower than anyone knew of, based on qualifying.
In the Main, for whatever reason, Barry "owned" the 200mm class just as
surely as Michael Salven "owned" the 1/8 4WD class. As nothing other
than an observer, I expected to see Kenji take off to a big lead,
fighting off Ralph. Those two (as I saw it) were the experts in this
class, and while Ralph had a rough time in qualifying, he was plenty
fast, and plenty good on the Ft. Myers track. Barry had so many things
going against him - I don't think he's raced very much at Ft. Myers, he
had no pit crew, no team of mechanics, no nothing. What he does have,
is incredible talent as a racer, and his car seemed to work as well as
at the World's.
Now,I know you're sick of hearing about the team......But from the looks of the article,there was no TEAM ....Just a incredible race driver....and an incredible car....
Had enough yet?....
#2220
I like Mike Meyers, if it wasn't for his reporting we would still be waiting for the results of the race but.... Barry owned 200mm!? PLEASE! According to the results, Kenji was what? 3 seconds behind after a 45minute main. I don't know about you, but that's now owning anyone.
Even Salven in 8th scale. He finished two laps ahead of second place after running 200+ laps. That's not owning or domination a race either.
Even Salven in 8th scale. He finished two laps ahead of second place after running 200+ laps. That's not owning or domination a race either.