Mugen MTX-3
#1561
Originally posted by black-knight
well i just checked my car based on your comments and .... i have no front dogbones or out drives.... i'm now not a happy camper!
and the last run the car did was a good 2nd place in a 20min final LOL, probably did the whole race in 2wd!
Novarossi: where's the best place in Aus for me to replace my missing parts! i need them ASAP, i three big meets, 3 weeks in a row to attend!
well i just checked my car based on your comments and .... i have no front dogbones or out drives.... i'm now not a happy camper!
and the last run the car did was a good 2nd place in a 20min final LOL, probably did the whole race in 2wd!
Novarossi: where's the best place in Aus for me to replace my missing parts! i need them ASAP, i three big meets, 3 weeks in a row to attend!
just take out the mugen hub and see if the v1r hub fits, then use the v1r cvd's...with the hubs
#1562
Tech Fanatic
Originally posted by chookgb
when i said mtx-2 ones i was referring to the dogbones not the unis,the dogbones will fit and are a little longer than the mtx-3 ones
when i said mtx-2 ones i was referring to the dogbones not the unis,the dogbones will fit and are a little longer than the mtx-3 ones
my mistake i did not read it properly
#1563
Tech Elite
iTrader: (52)
Originally posted by black-knight
well i just checked my car based on your comments and .... i have no front dogbones or out drives.... i'm now not a happy camper!
and the last run the car did was a good 2nd place in a 20min final LOL, probably did the whole race in 2wd!
Novarossi: where's the best place in Aus for me to replace my missing parts! i need them ASAP, i three big meets, 3 weeks in a row to attend!
well i just checked my car based on your comments and .... i have no front dogbones or out drives.... i'm now not a happy camper!
and the last run the car did was a good 2nd place in a 20min final LOL, probably did the whole race in 2wd!
Novarossi: where's the best place in Aus for me to replace my missing parts! i need them ASAP, i three big meets, 3 weeks in a row to attend!
I got some universals now anyway. Front was running 197mm and they still popped out!
Barry Walker would be your best bet. He mentioned he was going down to Eastern Creek this weekend.
Who won? The track isn't that bad (I was running 45s +40s...took the wrong tyres with me ) and still didn't feel that bad.
One thing I've noticed, the MTX3 seems to run softer tyres then the MTX2.
#1564
have any of the sydney racers tried a 40/40 shore setup on the mugen at moorebank?
#1566
Originally posted by VenomWorldOrder
have any of the sydney racers tried a 40/40 shore setup on the mugen at moorebank?
have any of the sydney racers tried a 40/40 shore setup on the mugen at moorebank?
#1567
Tech Elite
iTrader: (52)
Originally posted by black-knight
i was running 42 front / 37 rear, i really wanted to run 40's rears but i had none.
i was running 42 front / 37 rear, i really wanted to run 40's rears but i had none.
#1568
I thought the standard kit tyres where 37...
#1570
Originally posted by Novarossi
Barry Walker would be your best bet. He mentioned he was going down to Eastern Creek this weekend.
Barry Walker would be your best bet. He mentioned he was going down to Eastern Creek this weekend.
#1572
Originally posted by Novarossi
Earlier quote :
Since when did Barry open up a hobby shop?
Earlier quote :
Since when did Barry open up a hobby shop?
i had never spoken to Barry until last weekend, and he seems to be a very genuine person, and seems to luv racing!!! just like the rest of us! i've had a change of heart! i'm not even going to buy spares from OS!
in the past i also remember saying... i'd never get beaten by a kyosho on the track let alone drive one! i also once said i'd never be seen refueling a mugen let alone drive one! LOL
i spoke to a "nameless" shop today that sold Mugen MTX3 kits and they have no parts! so no sale for them....
Last edited by black-knight; 01-07-2003 at 02:49 AM.
#1574
Originally posted by Novarossi
HaHa, I think I know who your talking about cause I spoke to them today.
HaHa, I think I know who your talking about cause I spoke to them today.
#1575
anyway back to the MTX3.....
Has anyone played with changing the roll center on the rear? if so what did u find?
Has anyone played with changing the roll center on the rear? if so what did u find?