Neo Attack 235mm Road Car
#121
Tech Adept
Hey guys iv got a M2 serpent impact mint condition with a .15bb nothing worng with this car but i want to run it against 1/8th guys and i was reading the other post in here and someone was talking about putting a .21 on a 235mm!? is the possable or do i need any mods to do this?would i have to do any bulking up on my tranny or drivetrain?
thanks guys!
thanks guys!
#122
Tech Regular
a 21 is the same block size as a big block 15. i would use a 1/8 scale clutch and 2 speed if it will fit.
#123
Tech Adept
Originally Posted by sedanaddict
a 21 is the same block size as a big block 15. i would use a 1/8 scale clutch and 2 speed if it will fit.
thanks man so preety much any up to date .21 will fit with no mods to the chassie,man that just made my day right there.So does anyone have any pics of there 235?
#124
Tech Adept
iTrader: (2)
.21 does fit it will require BB motor mts,frame mounting hole modification,
clearance grinding to frame,relocate engine away from two speed, and after all that it still is not legal and has a marginal drivetrain meaning belt cross sections. If you want to race 1/8 buy a good used car,they drive much better than an overpowered 235.
clearance grinding to frame,relocate engine away from two speed, and after all that it still is not legal and has a marginal drivetrain meaning belt cross sections. If you want to race 1/8 buy a good used car,they drive much better than an overpowered 235.
#125
mx 4
Originally Posted by azcau
I WAS WONDERING IF YOU STILL HAD THIS & IF SO DO YOU WANT TO SELL ?
AARON
AARON
pm if interested