Mugen MTX-4
02-28-2007, 04:45 PM
#7561
Originally Posted by tomcat01
hey guys i am getting in to nitro touring this year and i was wondering what crank shaft do i need for the mugen mtx4?
AKA SG Shaft.
AKA (p)
Then it needs to be a 3 port - rear exhaust with slide carb.
Here is an example.
http://www2.towerhobbies.com/cgi-bin...&I=LXJFY8&P=ML
02-28-2007, 04:49 PM
#7562
Originally Posted by Artificial-I
Pilot Shaft
AKA SG Shaft.
AKA (p)
Then it needs to be a 3 port - rear exhaust with slide carb.
Here is an example.
http://www2.towerhobbies.com/cgi-bin...&I=LXJFY8&P=ML
AKA SG Shaft.
AKA (p)
Then it needs to be a 3 port - rear exhaust with slide carb.
Here is an example.
http://www2.towerhobbies.com/cgi-bin...&I=LXJFY8&P=ML
02-28-2007, 05:02 PM
#7563
Tech Initiate
...
Last edited by racer2; 02-28-2007 at 06:52 PM.
02-28-2007, 07:03 PM
#7564
Originally Posted by kidDynomite
Hey Rainer, guys in the PI tell me that their pretty good. Way better than 3racing, almost on par with quality of Kawahara. Jap.spec. 
02-28-2007, 09:38 PM
#7565
Originally Posted by Artificial-I
Pilot Shaft
AKA SG Shaft.
AKA (p)
Then it needs to be a 3 port - rear exhaust with slide carb.
Here is an example.
http://www2.towerhobbies.com/cgi-bin...&I=LXJFY8&P=ML
AKA SG Shaft.
AKA (p)
Then it needs to be a 3 port - rear exhaust with slide carb.
Here is an example.
http://www2.towerhobbies.com/cgi-bin...&I=LXJFY8&P=ML
03-01-2007, 12:13 AM
#7566
Originally Posted by afm
Could be, because in Spain they are allready offering a MTX4 World Champioship Edition with a free Ninja hat signed by K Fukuda at 299 Euros.
According to the ad The car has new steering blocks, new rear shock tower, and aluminum wheel hex's.
Look here
http://www.modelcar-rc.com/ofertas/ofertas.htm
AFM
According to the ad The car has new steering blocks, new rear shock tower, and aluminum wheel hex's.
Look here
http://www.modelcar-rc.com/ofertas/ofertas.htm
AFM
03-01-2007, 06:27 AM
#7567
Originally Posted by gentleman81
doesnt have to be a 3 port
Either way its worth noting it to him because hes also wondering what crankshaft to use so I decided to make sure I gave him all the info he needed to get into nitro touring.
03-01-2007, 08:24 PM
#7569
Originally Posted by Artificial-I
Yes it does, if your going to race. 5 port is illegal. He said "hes going to be getting into nitro touring". Sounds like hes going to be racing.
Either way its worth noting it to him because hes also wondering what crankshaft to use so I decided to make sure I gave him all the info he needed to get into nitro touring.
Either way its worth noting it to him because hes also wondering what crankshaft to use so I decided to make sure I gave him all the info he needed to get into nitro touring.
03-01-2007, 08:56 PM
#7570
Originally Posted by gentleman81
just got a x4, what are the must have upgrades
03-04-2007, 02:13 PM
#7573
clutch nut size
can someone tell me the socket size of the clutch nut in this kit? i.e. 5/16, 3/8....
thanks in advance
thanks in advance
03-04-2007, 06:20 PM
#7575
Tech Initiate
can not find the correct servo arm for my MTX-4 and R.
i use KO servos. do most people just take the ko throttle arms and cut them in half?
any help would be appreciated.
i use KO servos. do most people just take the ko throttle arms and cut them in half?
any help would be appreciated.