V-ONE S Thread
09-28-2003, 06:13 PM
#3736
Tech Addict
Originally posted by sausage_link
What type of bike ?
What type of bike ?
!
09-28-2003, 06:18 PM
#3737
Tech Apprentice
Hello people, I am a bit confused how to adjust droop and ride height? The grub screws in the rear arm that I think I am supposed to adjust don't make contact with anything. Is this because I have them adjusted too far or could it be possible that I have something else set wrong?
My other question is to adjust ride height is that only dependant on the spacers in the springs?
My other question is to adjust ride height is that only dependant on the spacers in the springs?
09-28-2003, 06:19 PM
#3738
HOnda NSR?
VFR?
or
Kawasaki ZZR?
VFR?
or
Kawasaki ZZR?
09-28-2003, 07:22 PM
#3739
Tech Apprentice
I installed my 2 speed 2day but Im confused about the clutch bell, with the single speed it could spin freely but with the 2 speed it doesn't, is this normal? ( I haven't had time to run it so I don't know if its right or not).
Ryan
Ryan
09-28-2003, 11:23 PM
#3740
Tech Apprentice
I fixed it, the pinion gears were on the clutch bell wrong.
Ryan
Ryan
09-29-2003, 12:20 AM
#3742
Originally posted by VoneS II
I fixed it, the pinion gears were on the clutch bell wrong.
Ryan
I fixed it, the pinion gears were on the clutch bell wrong.
Ryan
09-29-2003, 12:33 AM
#3743
Tech Addict
Site...
Here's a site with good info on chassis setup (http://home.tiscali.be/be067749/58/). Some of you may have seen it before but for those that haven't it should help you out.
09-29-2003, 02:11 AM
#3744
Tech Apprentice
I ran the car and there is a great improvement in performance. The only prob. is I can't hear it change gear. Should I be able to or not?
Ryan
Ryan
09-29-2003, 05:11 PM
#3746
I can hear mine change heaps... everyone can hear it... If you cant hear it then maybe its adjusted wrong... Also have you dont SP racers mod to the 2nd gear housing ??
09-29-2003, 05:29 PM
#3747
Tech Addict
Originally posted by VoneS II
I ran the car and there is a great improvement in performance. The only prob. is I can't hear it change gear. Should I be able to or not?
Ryan
I ran the car and there is a great improvement in performance. The only prob. is I can't hear it change gear. Should I be able to or not?
Ryan
! The engine revs should slightly drop for a spilt second and then zoooooooooooooooommmmm 
!I set the grub screw to about flush... try that.
09-29-2003, 05:32 PM
#3748
Tech Addict
Originally posted by Dishy
Hello people, I am a bit confused how to adjust droop and ride height? The grub screws in the rear arm that I think I am supposed to adjust don't make contact with anything. Is this because I have them adjusted too far or could it be possible that I have something else set wrong?
My other question is to adjust ride height is that only dependant on the spacers in the springs?
Hello people, I am a bit confused how to adjust droop and ride height? The grub screws in the rear arm that I think I am supposed to adjust don't make contact with anything. Is this because I have them adjusted too far or could it be possible that I have something else set wrong?
My other question is to adjust ride height is that only dependant on the spacers in the springs?
09-29-2003, 05:49 PM
#3749
Originally posted by V-One S Racer
You should definately hear it ! The engine revs should slightly drop for a spilt second and then zoooooooooooooooommmmm !
I set the grub screw to about flush... try that.
You should definately hear it
! The engine revs should slightly drop for a spilt second and then zoooooooooooooooommmmm !I set the grub screw to about flush... try that.
09-29-2003, 06:44 PM
#3750
Tech Apprentice
Sorry V-One S Racer didn't get to lilydale to see, I was really ticked the weather looked perfect and here was me stuck at home struggling to get a body ready that would be race legal. Ended up stuffing up the paint job because I rushed. 
Maybe Sunday week, you race each fortnight isn't it.
Maybe Sunday week, you race each fortnight isn't it.