Serpent 747 1/10 200mm touring @Nurnberg Toy Fair 2012
#708
I didn't know I was supposed to use LiFe when I bought this car. Later my friend told me I need to because NiMh would not fit. But I made it work NiMh is a bit wider than LiFe but you tape it as to the middle as possible on the battery holder and you will have 3mm clearance from the side belt. LOL
Last edited by snuvet75; 11-03-2013 at 07:28 AM.
#709
Side belt seems to rub against manifold? I has already worn down the words on the belt but belt itself seems fine. How do I avoid this friction?
#710
I guess you've already tried to tighten the belt tensioner slightly? What engine/manifold combo are you using? I have run Picco, Xceed and Novarossi engines in my 747 an never had an issue with the belt rubbing on the manifold unless the tensioner was fully up. HTH.
#711
Tech Fanatic
iTrader: (2)
I'm new to 747 too. At least I know Reedy pack fits perferct.
I didn't know I was supposed to use LiFe when I bought this car. Later my friend told me I need to because NiMh would not fit. But I made it work NiMh is a bit wider than LiFe but you tape it as to the middle as possible on the battery holder and you will have 3mm clearance from the side belt. LOL
I didn't know I was supposed to use LiFe when I bought this car. Later my friend told me I need to because NiMh would not fit. But I made it work NiMh is a bit wider than LiFe but you tape it as to the middle as possible on the battery holder and you will have 3mm clearance from the side belt. LOL
#712
Mount the side belt tensioner beneath the radio tray. This will alllow more adjustment to push the side belt downwards and away from the manifold.
#714
#718
Tech Apprentice
Hi, Do I need to have the carbon bumper plate to be able to use the foam bumper ? or the plastic one that comes with the kit can fit the foam bumper as well?
Thanks.
Thanks.
#719
Tech Elite
iTrader: (89)
[QUOTE=frozencone;12720006]Hi, Do I need to have the carbon bumper plate to be able to use the foam bumper ? or the plastic one that comes with the kit can fit the foam bumper as well?
No, If you want to run a foam bumper I would run the plastic top bumper not the carbon. I would also get the wide front foam bumper rather than the stock. Look at the manual for the 733 it will Illustrate what parts are needed.
Pass you soon...
No, If you want to run a foam bumper I would run the plastic top bumper not the carbon. I would also get the wide front foam bumper rather than the stock. Look at the manual for the 733 it will Illustrate what parts are needed.
Pass you soon...