Originally Posted by nitrobeast
Anybody find replacement screws for the diff? I stripped one and looks like i have to order diff case to get screws.
New screws only come with a new diff case. I believe the best phillips screwdriver to use on these screws is a 4.0 phillips. Anything smaller will strip the head of the screw. I have one screwdriver in my toolbox that fits these screws perfectly but it is not an RC tool so I'm not sure of the size.
Another thing you should check; is make sure these same screws pass thru the rear pulley holes with ease. I've found that the holes in the rear pulley are slightly under sized which can give you false sense of how tight the diff halves actually are. I drilled out the holes to be slightly bigger. Be careful there is not much room for error.
Pass you soon...