I normally do not respond to these Resizing threads / posts any longer mostly due to my busy work schedule. Anyway, we try to be informative as possible on our website to answers most questions.
At this point with a few thousand P&S set reconditioning services provided Internationally the feedback has been very good. Not to overlook my tooling design background and experience with alloy reconstruction....I couldn't have even begun without support and INPUT received from racers like Derek, Roger, and Terry. Word of mouth is now and always will be the best form of advertising. Without the work I would be just "pinching sleeves," as apposed to advancing to a reconditioning process that includes, but is not limited to, a very accurate & controlled sleeve cylinder reconstruction resulting a new designed Piston to Sleeve taper fit. Also, Techniques we use to repair/improve damaged surface finish conditions has been our major area of focus .......Is added to service we provide that which in many cases is needed to restore lost compression due to contamination, poor engine break-in, etcetera. We soon plan to elaborate on our website illustrating damaged conditions that are or are not repairable. We feel surface finish as important to proper seal as a tailored P&S set fit. We have been more than happy to spend more time with service to insure better results....Untill no longer practical/cost efficient.
To be honest, Race results especially with these Italian based reconditioned engines has been better than we originally anticipated. Even our RTR engine resizings break-in nicely, perform quit well, and maintain good longevity. Moreover, There's nothing I find more enjoyable than to see a budget club racer race competitively and do well on race day with a hot engine from a few years past.......
"A dollar saved is a dollar earned"
I thought it time to acknowledge and respond to the support offered by these members here at RC TECH this and previous resizing threads. Thanks again for the kind words above guys.
RayAracing piston+sleeve reconditioning-resizing Tooling+Services ALL Buggy, Truggy, Car, and Truck engine models .12 thru .50 since 2001
SHIPPING:4373 Creek Road, Chaffee, NY 14030 USA
PHONE: (716)783-5198 EMAIL: RayA@RayAracing.com SERVICE: http://www.rayaracing.com/