Kyosho v-one rrr
#5161
Tech Master
iTrader: (1)
This is good news!!!! Hooray!!!!!!!!!!!!!!!!
Originally Posted by empty
Noticed it hadnt been posted in the RRR thread, but the 2006 Pre Worlds held last weekend was won by a RRR, and placed 3rd, 4th, 6th, 7th. All other places were Mugen.
1 Hang Hung Cheung Hong Kong Kyosho Team / Kyosho Hong Kong / 183 01:00:14.080 Main Final
2 Simon Camilleri Model Motorsport International / Model Mot 182 01:00:08.895 Main Final
3 Steven Jovanovic Team Kyosho Australia / Model Flight / VP 182 01:00:20.437 Main Final
4 Ric Bartolozzi Team Kyosho Australia / Kyosho Australia / 179 01:00:15.615 Main Final
5 Scott Robinson Mugen MTX4 / JP 178 01:00:08.116 Main Final
6 Philip Woodbury JPM Racing / JPM Racing / Kyosho Australia 175 01:00:12.365 Main Final
7 Takashi Miyashita Kyosho / Kyosho / Kyosho RRR / Sirio 175 01:00:30.665 Main Final
8 Wayne Walker Online Hobbies / Model Motorsport Internat 167 01:00:10.149 Main Final
9 Jesse Davis Hydrolink Racing / MMI / Hydrolink Racing 163 00:59:40.968 Main Final
10 Chris Reade Model Motorsports / Model Motorsports Inte 161 01:00:06.034 Main Final
Attached photo is 1st Place (left) Chan Kai Man, Pitman and (right) Hang Hung Cheung, driver.
For more details and pictures etc see http://200mmifmarworlds.no-ip.org/
1 Hang Hung Cheung Hong Kong Kyosho Team / Kyosho Hong Kong / 183 01:00:14.080 Main Final
2 Simon Camilleri Model Motorsport International / Model Mot 182 01:00:08.895 Main Final
3 Steven Jovanovic Team Kyosho Australia / Model Flight / VP 182 01:00:20.437 Main Final
4 Ric Bartolozzi Team Kyosho Australia / Kyosho Australia / 179 01:00:15.615 Main Final
5 Scott Robinson Mugen MTX4 / JP 178 01:00:08.116 Main Final
6 Philip Woodbury JPM Racing / JPM Racing / Kyosho Australia 175 01:00:12.365 Main Final
7 Takashi Miyashita Kyosho / Kyosho / Kyosho RRR / Sirio 175 01:00:30.665 Main Final
8 Wayne Walker Online Hobbies / Model Motorsport Internat 167 01:00:10.149 Main Final
9 Jesse Davis Hydrolink Racing / MMI / Hydrolink Racing 163 00:59:40.968 Main Final
10 Chris Reade Model Motorsports / Model Motorsports Inte 161 01:00:06.034 Main Final
Attached photo is 1st Place (left) Chan Kai Man, Pitman and (right) Hang Hung Cheung, driver.
For more details and pictures etc see http://200mmifmarworlds.no-ip.org/
#5162
RC-Champ
Hi has anyone tried to order in RC-Champ (japan)? just wanted to know if they're service is good, they got cheaper prices compared to other online shop...thanks in advance..
#5163
I got my RRR WC from them, good prices and even better service.
#5165
It looks awesome
firtzD: It's really cool that you could get an aluminum shock tower made. Since I'm new at this, I guess I don't quite understand the advantage over a graphite/composite version.
I have a few aluminum parts from 3Racing (http://www.3racing.com.hk) - brake bracket, brake bar, side stiffner and throttle mixing arm. These came highly recommended by the folks I bought the car from. Are there any other parts that I should consider getting?
Thanks!
P.S. Thanks to everyone that answered my body question thus far! AndyT ©, 710baby and Xyvern
I have a few aluminum parts from 3Racing (http://www.3racing.com.hk) - brake bracket, brake bar, side stiffner and throttle mixing arm. These came highly recommended by the folks I bought the car from. Are there any other parts that I should consider getting?
Thanks!
P.S. Thanks to everyone that answered my body question thus far! AndyT ©, 710baby and Xyvern
#5166
Tech Master
iTrader: (1)
actually you dont need aluminum parts if you're a very good driver... the worlds edition is very race worthy ...well for me.... because i broke a graphite shock tower already.... the tower that comes with the RRR Worlds kit isn't very thick.. so i just had an aluminum one machined.. its so tough now... i won't worry anymore.
#5167
Tech Master
iTrader: (32)
Originally Posted by fritzD
actually you dont need aluminum parts if you're a very good driver... the worlds edition is very race worthy ...well for me.... because i broke a graphite shock tower already.... the tower that comes with the RRR Worlds kit isn't very thick.. so i just had an aluminum one machined.. its so tough now... i won't worry anymore.
#5170
Tech Master
iTrader: (1)
the aluminum shock tower i have have is really quite light... i cant tell the difference with the graphite one.. my neigbor offered me different alloys... the was one that was very tough and light but very expensive... i chose aluminum since it was affordable, tough, and light also...
im sure you can find machine shops in your place... if not, i'd be willing to help you..
im sure you can find machine shops in your place... if not, i'd be willing to help you..
#5171
Guys, aluminum may not break in a crash but it will bend. Your best bet to replace the thin stock shock tower is the Skyline 4mm rear shock tower:
http://www.skylinercracing.com/store/P_39.htm
Nearly everyone at my track uses it and no one has broken one as far as I know.
http://www.skylinercracing.com/store/P_39.htm
Nearly everyone at my track uses it and no one has broken one as far as I know.
#5172
oh boy
win races with the 3R i hope to do havent changed much dont need to car has enough the weight is ok be at cp fri rain pending decision A main & a cigar oh boy
#5173
jeffreylin - In addition to the rear shock tower, what else have you replaced on your car???
#5174
Originally Posted by rmdhawaii
jeffreylin - In addition to the rear shock tower, what else have you replaced on your car???
Kawahara K-484 back plate
Kyosho VZW216 Aluminum Middle Shaft Mount
Kyosho VZW207 rear shock stay
#5175
Originally Posted by bulletdays
Hi has anyone tried to order in RC-Champ (japan)? just wanted to know if they're service is good, they got cheaper prices compared to other online shop...thanks in advance..