R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Nitro On-Road (https://www.rctech.net/forum/nitro-road-3/)
-   -   OS1 to OS2 conversion. (https://www.rctech.net/forum/nitro-road/470168-os1-os2-conversion.html)

JIM1 01-11-2011 02:26 PM

OS1 to OS2 conversion.
 
Hi People

I have recently dusted off and re-built my Sepent 960 and would like to convert it to OS2. Is there a conversion kit available from Serpent to do both axles or do I have to buy the parts separately?

Any help would be much appreciated.

Regards.

motojon 01-11-2011 02:32 PM

if its the 08 version 960, i believe u can still buy update for the 966 for about $300 give or take, and have the latest

JIM1 01-11-2011 02:42 PM

Yes it is the '08' version. I guess if I did this I would have the new rear end also. Shame Serpent dont list the conversion kit on their web page.

Would I be able to use Mugen/Kyosho wheels with OS2?

motojon 01-11-2011 02:53 PM

yes thats the reason for the 0S2 offset, give Sam at Kamikaze a ring he'll be able to point u in the right direction

PCloopeyUK 01-11-2011 04:02 PM

you could try serpent-uk at Elite models at eliterc-online.co.uk

yappy 01-11-2011 07:23 PM

966 conversion here

http://www.kamikazetoysandhobbies.co...prod=SER903326

michael 1 01-11-2011 08:27 PM

you need part # 903254 aprox,$80.00 first to convert your 960 to the newer

version upper and lower rear arms and hubs , you can then run mugen

/kyosho rims then if you want you can convert over to the 966

JIM1 01-11-2011 11:51 PM


Originally Posted by michael 1 (Post 8473730)
you need part # 903254 aprox,$80.00 first to convert your 960 to the newer

version upper and lower rear arms and hubs , you can then run mugen

/kyosho rims then if you want you can convert over to the 966

Michael, this part number is not found when i enter it into Serpents search facility. I would rather just convert the hubs rather than convert fully to 966 spec just to save on costs.

Regards.

michael 1 01-12-2011 07:36 PM


Originally Posted by JIM1 (Post 8474450)
Michael, this part number is not found when i enter it into Serpents search facility. I would rather just convert the hubs rather than convert fully to 966 spec just to save on costs.

Regards.

serpent america has that part # it should include the axle's with it , the 966 conversion is a different #


All times are GMT -7. It is currently 02:18 PM.

Powered By: vBulletin v3.9.3.8
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.