dj apolaro

Over the last few weeks I have been getting racers asking for my set-up. I will post it here as well for everyone that wants to see it.

DJ Apolaro

dougday

I will be at the Winternats. See you there

georges972

Thanks DJ
Also what "flex" you use with the C801 ?
I have a C02 and a C801
G

dougday

DJ,

Are you using the new front upper bulkhead?

Shepherd

(Over the last few weeks I have been getting racers asking for my set-up. I will post it here as well for everyone that wants to see it.)

Thanks for posting this, what type of tracks is this set up being used on !

Andy

dj apolaro

Up to this point, I have been using the front solid and the rear floating.

I am going to try at the Winternats the front flexing and the rear floating to see what it feels like.

DJ Apolaro

dj apolaro

I have been using the stock. I tried the Optional one's that are with the Euro kit and for me the car is not as smooth through the corner. I ended up shimming the optionals to the same height as the stocks. LOL


I have ran it on 5 different tracks. Homestead, Fort Myers, Arcadia, Kissimmee and Chaplin. I would say from Medium to super high bite and all with the same set-up. My car has felt good on all tracks and I just change little things like caster, toe, camber. Nothing major though.

DJ Apolaro

Shepherd

Another question, as just starting to build this car, is the rear bulkhead B an optional upgrade or in the kit, if its an up-grade what part number is it.

Andy

dj apolaro

I think the A and B come in the kit.

DJ

MugenDrew

iTrader: (36)

Hey Dj the -1.5 toe out in the front, is that for the axle or per wheel?

dj apolaro

It is 1.5 on each side or 3 total.

DJ

DS Motorsport

iTrader: (2)

New "reversed" clutch for the C801:



http://www.redrc.net/2012/02/caprico...n-road-clutch/

Riketsu

iTrader: (34)

Guess Mr. Hudy isn't the only one who "optimizes"..........

DS Motorsport

iTrader: (2)

Now the question is who is a better optimizer?.

SOLOARTIST 702

why can't they both just be good