Kyosho v-one r4!!!!
#166
Where are you guys mounting the transponder???? Any pics would be great.....
Also what do you think of the 2.6 x 6mm screws that hold the throttle and brake linkage on the throttle servo arm? These screws seem way to short as there is only 2mm of the screw that actually screws in.
I need to find some longer ones or go back to the old linkages.
Also what do you think of the 2.6 x 6mm screws that hold the throttle and brake linkage on the throttle servo arm? These screws seem way to short as there is only 2mm of the screw that actually screws in.
I need to find some longer ones or go back to the old linkages.
#167
Hey guys,
So did anyone run their car yet?
I had mine ready to go for practise on Saturday and racing on Sunday. Unfortunately it rained all weekend here.
So any feedback or tips from anyone that has run the car would be great.
Thanks.
So did anyone run their car yet?
I had mine ready to go for practise on Saturday and racing on Sunday. Unfortunately it rained all weekend here.
So any feedback or tips from anyone that has run the car would be great.
Thanks.
#168
Kit
http://rcmarket.com.hk/product_info....ducts_id=10637
Parts second shipment on the way now !
http://rcmarket.com.hk/index.php?cPath=51_99_124_317
http://rcmarket.com.hk/product_info....ducts_id=10637
Parts second shipment on the way now !
http://rcmarket.com.hk/index.php?cPath=51_99_124_317
#169
Tech Adept
Does this car come with cvds or dog bones ( front ) ?? , can somebody post some more pics ??
#170
#171
Tech Adept
thank you..
#172
where are u kyo guys??
For a "new car" this has got to be the deadest THREAD I have ever saw
No comparison, no weight, no ohh i like this ohh i dont like that nothing!!
No comparison, no weight, no ohh i like this ohh i dont like that nothing!!
#173
Tech Rookie
Hi,I tell you some tips of the car.
50.000 cst for rear diff is thin,60.000 for low traction and 80.000-100.000 for high traction.
The clutch spring is a little soft,better with the FM432,(0.6mm gap and 1.0mm preload)
On throttle servo arm i put 3x8 screws.(Drilling the plastics in order to the linkage turn free)
The car goes very fast,I TQ´d the first race of the Spanish Championship,finishing 9th due to problems with the fuel comsuption.
It´s very easy to drive and have a lot of traction,nice car.
50.000 cst for rear diff is thin,60.000 for low traction and 80.000-100.000 for high traction.
The clutch spring is a little soft,better with the FM432,(0.6mm gap and 1.0mm preload)
On throttle servo arm i put 3x8 screws.(Drilling the plastics in order to the linkage turn free)
The car goes very fast,I TQ´d the first race of the Spanish Championship,finishing 9th due to problems with the fuel comsuption.
It´s very easy to drive and have a lot of traction,nice car.
#174
Tech Adept
sounds good to me , also , do you have like a set up sheet to post with track conditions ect.. saludos
Yukiyu
Yukiyu
#176
Tech Adept
#178
Tech Regular
iTrader: (4)
Well in that case- pass this along to your "friend"
http://www.rc-world.gr/kyosho-vone-r...tup-and-manual
http://www.rc-world.gr/kyosho-vone-r...tup-and-manual
#179
Tech Adept
Well in that case- pass this along to your "friend"
http://www.rc-world.gr/kyosho-vone-r...tup-and-manual
http://www.rc-world.gr/kyosho-vone-r...tup-and-manual
#180