litespeed-dom

iTrader: (4)

yeah, you learn about ways to "safety proof" your car after you lost left rear suspension, when a backmarker races you after letting you pass and use you as brake on the last lap while you are on a TQ run.

But in actuality, the shock popped out only happened to me a handful of times with my MRX3 with the current design, but happened to me more on my XRAY and old Serpent 1/8th when they have the same design as the MRX4 now.

Dom

border r/c

today we did get the whole spare part line in from A-Z
inluded the Titanium screw sets
http://shop.the-border.nl/customer/home.php?cat=599

slooookomo

iTrader: (4)

Next question for Mike is which ackerman does what... If I find the car nervous to drive, which ackerman should I use?

Thanks!

Mike_Swauger

With the long wheelbase I run the B ackerman. With the short wheelbase I run the D ackerman. If your car is nervous go to the A ackerman.

border r/c

Rick's MRX4 Dutch champ 2004

eddiethefish

Rick's the MAN!

border r/c

one more

eddiethefish

2 MRX and 1 Evolva, where are those Serpents?

dpdiehl

Mike, have you posted your MRX4 set up anywhere yet? Thx

MrChan

If u really want to see the result....

Here is the result that serpent have won recently.
http://www.mytsn.com/news/publ.asp?pid=10623

but i think all about driver...the car are about the same....

eddiethefish

Don't get me wrong Mr. Chan. I was referring to the pic border r/c posted for the Dutch Champ.

Of course, Serpent is great car. It always has been.

Period.

SERPENTFREAK69

YOU TELL EM CHAN!!

bleach1

Hi, i am just looking for some advice on purchasing a pair of servos for my mrx4.

I am looking to use JR servos and am currently using the JR servos DS8455 for steering and DS8425 for throttle in my mtx3. I am very happy with the performance of the servos and was wondering if they would be suitable for use in the mxr4? Im only starting out in 1/8th so absoloute performance isnt really an issue yet. Im just after a pair of JR servos that will do the job reliably.

Thanks.

Ed Delgado

iTrader: (3)

I use Futaba 9402 servos, and have never had a problem with them. The 9402 has about 110 oz. inches of torque and a response time of .11 seconds (or thereabout). As long as your JR servos have at least that much torque and response time, you should be OK.

jnims29

Ed, where do you race at in south florida? I am going to be over the winter.