Mrx-3
#16
Registered User
MTX3RACER! (Rossi Maranello)
I saw one yesterday for the first time. We didn't race at fastlane yesterday, but it turned into a bunch of guys just hanging around "parking lot bashing". Anyway, there was a guy out there with one in his MRX3. It looked decent, but we were only doing high speed runs up and back, can't really tell how it will be on a track. But, I'd say it will hang with the Sirios, RBs, and Nova Megas.
Also, use the set-ups you get from the guys on the west coast as a guide, not as absolute gospel. Because they have smoother and higher traction tracks out there. They may be doing things in their set-ups to take traction away, where we have to add as much as possible. I'm not saying don't use them, just be prepared to make a few minor changes when things don't hook up right away.
Also, use the set-ups you get from the guys on the west coast as a guide, not as absolute gospel. Because they have smoother and higher traction tracks out there. They may be doing things in their set-ups to take traction away, where we have to add as much as possible. I'm not saying don't use them, just be prepared to make a few minor changes when things don't hook up right away.
#17
great, i'm going to pick up a maranello later tonight
#18
Tech Fanatic
iTrader: (5)
Clutch bell gears.
On the Clutch bell......
Can someone give me the distance in MM from the center of the of the first gear to the center of the 2nd gear. also what pitch module are the gears for the mrx-3 kit 0.8 or 1.0.
[||||||] A
[||||||||] B
/______\
Distance Btwn A and B centered on the gears.
Can someone give me the distance in MM from the center of the of the first gear to the center of the 2nd gear. also what pitch module are the gears for the mrx-3 kit 0.8 or 1.0.
[||||||] A
[||||||||] B
/______\
Distance Btwn A and B centered on the gears.
#21
Re: Rossi
Originally posted by trashcar
Did that Rossi work well for you. If so what pipe are you running.
Did that Rossi work well for you. If so what pipe are you running.