Croes.marc

Hi wich car do you think performs better.
I have a GT4R and I want to buy a V-oneRR or Trinity RNT wich one do you think performs better.
If i gonna buy the V-oneRR I am gonna put a lot of kawahara
parts in it do you think thats a good idiea.And if someone can tell me how to put a 2 speed SERPENT in to a GT4R.
Thanks
marc

RAP66

iTrader: (1)

Marc,

do a bit of searching in the yokomo thread, there was a guy that was making the transmission shaft to adapt the serpent 2 speed for use in the Yok...

yokomoracer

This is what I would do:

But both the V 1 RR and Reflex.
Use the K Factory hopups come with Reflex to hopup
your V1RR ( like Chassis, upper deck, rear brace, alloy pulleys,
fuel tank, shock towers...... ).

Put toghther the remaining reflex with the remaining parts from V 1 RR, and sell it on eBay.

This will be cheaper is you were to buy a V 1 RR and all the Kawahara stuff. , especially considering brand new reflex NT
has lately been sold on eBay for about $220, that's a great way
to buy hopup parts for any V 1 R
http://cgi.ebay.com/ws/eBayISAPI.dll...tem=1713139549

Turtle On Nitro

all the k factory stuff isn't the BEST quality stuff you can find...kawahara all the way...

dtm

Yes...some of the K factory quality is very marginal. However, if you can accept GPM...then K factory will be ok!!! Kawa quality is in a different league (much much better).....although their alloy pullies do wear quite quickly!!

adelmundo

As far as K Factory, I would stick to the non-moving parts (such as upper graphite deck, chassis, motor mounts, etc.) At least they are static on the car and hold up quite well. The moving parts on the other hand (such as the universals, front sway bar, etc.) have been known to break. They have been out for quite a while so maybe their quality may have improved, but still I would stay away from the moving hop ups and stickk to the ones they stay static.

Croes.marc

THANKS FOR THE INF.
SO WICH ONE DO YOU RECOMANT ME TO BUY.
tHE V-ONERR OR THE TRNT
AND I WANT TO PUT A JPMT12 IN ONE OF THESE CARS.
DO YOU THINK THATS A GOOD IDIEA.

carpet_killa

i believe his name is smitty

Croes.marc

If I buy the V-oneRR and put kawahara parts in it can you
put the trinity RNT 2 speed in the V-oneRRor not.
Is the V-oneRR kawahara car a good car .And i Want to put the JPMT12 in it do You think thats a good idiea.please let me know.

nova racer

it would be cheaper to turn the reflex into a v1 rreflex use kyosho plastic and reflex metal like the drop out chassie and upper deck shock towers alloy shafts pullies and so on. then you would have a car with a lower center of gravity and a lot of extra parts. Aint nothing like a custom rc make it the way you want that was just my 2 cents.

BTW. i call my car a V 1 flex now lol

Croes.marc

so I should buy a reflex nt and. put V-oneRR parts in it ,but can every parts of the V-oneRR fit on the reflex nt for xample;belt etc.

Marc

Croes.marc

I meen the V-oneRR not the GRP .,
you can see the V-oneRR on the HPI forum

nova racer

sounds like a good idea to me then you will have a maxed out v1r. the only part that wont interchange is the 2speed.

Croes.marc

hi
can you tel me were can i buy a V-oneRR

adelmundo

You can buy the RR from hoby shops in Hong Kong or Japan.