MUGEN SEIKI MRX5
#2731
Break in done !!! Feels goods the new engine Picco !!! Ready for star the race at kissimme orlando
Nitro world cup 2013 !!!!
Nitro world cup 2013 !!!!
#2732
Hello, im looking for mrx5 wc. Please pm if anyone is selling. Thanks
#2733
Ready for next weekend !! Florida state race At homestead track !!!
See there guys
Ciao
See there guys
Ciao
#2734
Tech Rookie
Hi Gianni,
It seem that you are not using the original front upper link. Cloud you please explain, what part you are using or post a picture?
Thanks.
It seem that you are not using the original front upper link. Cloud you please explain, what part you are using or post a picture?
Thanks.
#2735
Ciao
I put back the mrx4 arms !!! I need testing at fort myers for the winternats 2014 !!! Maybe its more strong for this track
Bye
I put back the mrx4 arms !!! I need testing at fort myers for the winternats 2014 !!! Maybe its more strong for this track
Bye
#2736
Tech Rookie
Hi Gianni,
Thanks for the quick reply. I actually did the same during last summer. I use the MRX 4 link and the H0139-B Front Upright. For me as a “just for fun” driver, I could not feel any difference when driving the car. Since then I did not break anything, even in the German Winter on an indoor track, which is not really forgiving …
I also like that I now can use bigger bearings in the front upright, because they seem to last much longer.
Karsten
Thanks for the quick reply. I actually did the same during last summer. I use the MRX 4 link and the H0139-B Front Upright. For me as a “just for fun” driver, I could not feel any difference when driving the car. Since then I did not break anything, even in the German Winter on an indoor track, which is not really forgiving …
I also like that I now can use bigger bearings in the front upright, because they seem to last much longer.
Karsten
#2737
Ahh perfect !!! Are you coming to winternats at fort myer in february?
#2738
Tech Rookie
As I live in Germany ... I will not attend.
#2739
Ok !!!
#2740
Rear tires don't fit
I am having a problem with rear tires.
I have Enneti tires and cannot fit them to my MRX5. When inserting the rear tire it doesn't reach the tip and the lever (H0279) doesn't close.
Am I the only one having this problem? Can anyone help?
Regards
I have Enneti tires and cannot fit them to my MRX5. When inserting the rear tire it doesn't reach the tip and the lever (H0279) doesn't close.
Am I the only one having this problem? Can anyone help?
Regards
#2741
Often the small things are overlooked. Check the pin in the center of the axle. Make sure it's centered and tightened with the set screw. Make sure the rim slides all the way on the axle, the tip of the axle should show. If the quick release lever does not slide up to lock the wheel in place, you may have to add some pressure. This isn't a problem with the car, but some tire manufactures rims don't always fit perfectly. As a quick fix, simply remove a little material from the center of the rim where the quick release lever rest. This should solve the problem with any tire(rim) you use. .
#2742
Often the small things are overlooked. Check the pin in the center of the axle. Make sure it's centered and tightened with the set screw. Make sure the rim slides all the way on the axle, the tip of the axle should show. If the quick release lever does not slide up to lock the wheel in place, you may have to add some pressure. This isn't a problem with the car, but some tire manufactures rims don't always fit perfectly. As a quick fix, simply remove a little material from the center of the rim where the quick release lever rest. This should solve the problem with any tire(rim) you use. .
#2743
Sometimes you just have to give a smack on the wheel to give that extra push.
#2744