European 2wd 1/8th pan car on-road Classic class
#4171
Tech Regular
Club Ports
Toledo only!
You can run the same number of ports as your last year point standing place. Myself= 3 ports, Joe= 1 port, and so on. I think the 3mm restricter needs to stay, but in all motors. You can get some crazy power these days, but we are not the go as fast as you can class. That is a important part of the appeal of the class.
LETS RACE SOME MORE!!!
You can run the same number of ports as your last year point standing place. Myself= 3 ports, Joe= 1 port, and so on. I think the 3mm restricter needs to stay, but in all motors. You can get some crazy power these days, but we are not the go as fast as you can class. That is a important part of the appeal of the class.
LETS RACE SOME MORE!!!
#4172
Toledo only!
You can run the same number of ports as your last year point standing place. Myself= 3 ports, Joe= 1 port, and so on. I think the 3mm restricter needs to stay, but in all motors. You can get some crazy power these days, but we are not the go as fast as you can class. That is a important part of the appeal of the class.
LETS RACE SOME MORE!!!
You can run the same number of ports as your last year point standing place. Myself= 3 ports, Joe= 1 port, and so on. I think the 3mm restricter needs to stay, but in all motors. You can get some crazy power these days, but we are not the go as fast as you can class. That is a important part of the appeal of the class.
LETS RACE SOME MORE!!!
#4173
Tech Apprentice
#4174
#4176
Tech Apprentice
#4178
I’m looking to get back into 1/8 on-road with a pan car (I’ve been out of it almost 25 years). I recently relocated to metro Detroit and plan on checking out the Toledo track this spring. Any recommendations on chassis, motor, gearing, pipe, body and tire combinations to get me in the ballpark would be greatly appreciated. Thanks
Last edited by GreenHell; 12-14-2016 at 01:23 PM.
#4181
I’m looking to get back into 1/8 on-road with a pan car (I’ve been out of it almost 25 years). I recently relocated to metro Detroit and plan on checking out the Toledo track this spring. Any recommendations on chassis, motor, gearing, pipe, body and tire combinations to get me in the ballpark would be greatly appreciated. Thanks
pipe http://www.novarossidirect.com/51011...52_p_2661.html
http://www.novarossidirect.com/51010...15_p_2660.html
chassis. Jason Irwin has chassis. Other guys will have to comment on which chassis they like best as I build my own.
http://www.irwinrc.com/ hope to see you in Toledo in the spring.
#4182
engine http://www.novarossidirect.com/LEGEND-5-GTI_p_3247.html
pipe http://www.novarossidirect.com/51011...52_p_2661.html
http://www.novarossidirect.com/51010...15_p_2660.html
chassis. Jason Irwin has chassis. Other guys will have to comment on which chassis they like best as I build my own.
http://www.irwinrc.com/ hope to see you in Toledo in the spring.
pipe http://www.novarossidirect.com/51011...52_p_2661.html
http://www.novarossidirect.com/51010...15_p_2660.html
chassis. Jason Irwin has chassis. Other guys will have to comment on which chassis they like best as I build my own.
http://www.irwinrc.com/ hope to see you in Toledo in the spring.
#4183
And most guys run 35 shore rear tires and hard 50 shore
up front.
up front.
Last edited by Taylorm; 12-19-2016 at 06:32 PM.
#4184
Tech Apprentice
engine http://www.novarossidirect.com/LEGEND-5-GTI_p_3247.html
pipe http://www.novarossidirect.com/51011...52_p_2661.html
http://www.novarossidirect.com/51010...15_p_2660.html
chassis. Jason Irwin has chassis. Other guys will have to comment on which chassis they like best as I build my own.
http://www.irwinrc.com/ hope to see you in Toledo in the spring.
pipe http://www.novarossidirect.com/51011...52_p_2661.html
http://www.novarossidirect.com/51010...15_p_2660.html
chassis. Jason Irwin has chassis. Other guys will have to comment on which chassis they like best as I build my own.
http://www.irwinrc.com/ hope to see you in Toledo in the spring.
#4185
Tech Regular
Welcome Back!
I’m looking to get back into 1/8 on-road with a pan car (I’ve been out of it almost 25 years). I recently relocated to metro Detroit and plan on checking out the Toledo track this spring. Any recommendations on chassis, motor, gearing, pipe, body and tire combinations to get me in the ballpark would be greatly appreciated. Thanks
LETS RACE SOME MORE!!!