European 2wd 1/8th pan car on-road Classic class
#361
#362
Garen,
Who retails these? What is the street price of the P8C?
Thanks
Who retails these? What is the street price of the P8C?
Thanks
#364
Garen, of all the current Novarossi based pipes (2015,2018,086,etc) used for on-road what would have the smooth powerband needed for this class. I plan to drop in the 3 or 5 port Novarossi based sportsman engine. I know the combo comes with a pipe, any idea what it is?
#365
Tech Master
iTrader: (7)
I don't know what pipe it is, but I assume it is made by Novarossi (the engine is), the pressure fitting is on the side, it sounds very different from other pipes, and considering the cost, I think it is perfect for these cars.
Zoot, if you want one soon, let me know quick. Incoming shipment is nearly sold out.
Zoot, if you want one soon, let me know quick. Incoming shipment is nearly sold out.
#366
I don't know what pipe it is, but I assume it is made by Novarossi (the engine is), the pressure fitting is on the side, it sounds very different from other pipes, and considering the cost, I think it is perfect for these cars.
Zoot, if you want one soon, let me know quick. Incoming shipment is nearly sold out.
Zoot, if you want one soon, let me know quick. Incoming shipment is nearly sold out.
I have a new 086 but its the old style that uses a silicone coupler. Has anyone seen the old style on-road headers anywhere. I can only find off-road versions.
Thanks,Will
#367
Garen... Thanks.. I will wait a bit. I am saving for a trip to Lincoln next month. Perhaps mid-summer if you get another shipment by then.
#369
I am looking for a new on-road header for the old style pipes that use silicone couplers. I have 2 new 9886 RB pipes that I would like to use. PM me if you have one to sell.
Thanks, Will
Thanks, Will
#370
My almost complete P8C!
Here are pictures of my P8C waiting on radio system, pipe and header. Engine is an old Paris Modifed Picco G1, probably way too much engine, but it was looking for a new home. I'm going to stick a 7mm venturi in the Novarossi carb and see what happens.
Enjoy!
Enjoy!
#371
#372
Tech Addict
Hello France,
Nice surprise with the price of the DXF Primo chassis...
It drop from 599€ to 399€ (including the low profile Savöx servo).
200€ lower because of the changing of distribution...
Au revoir.
Nice surprise with the price of the DXF Primo chassis...
It drop from 599€ to 399€ (including the low profile Savöx servo).
200€ lower because of the changing of distribution...
Au revoir.
#373
Got the kids pan car about 95% ready to go. I still need to get a rec. pack mounted and change out the steering servo arm since the one I have in it right now limits the steering travel. Kit was pretty easy to build and most everything fit together well. My only issue was the non-english distructions. You really have to study the pictures hard!
#374
just curious, what will be different in handling if that front plate would be very stiff or really free moving?
Is it that with high traction you should set it more stiff (almost no side to side action)and with less traction you should set it more softer? Or is it completly something else? It seems there is no info about that.
Is it that with high traction you should set it more stiff (almost no side to side action)and with less traction you should set it more softer? Or is it completly something else? It seems there is no info about that.
#375
just curious, what will be different in handling if that front plate would be very stiff or really free moving?
Is it that with high traction you should set it more stiff (almost no side to side action)and with less traction you should set it more softer? Or is it completly something else? It seems there is no info about that.
Is it that with high traction you should set it more stiff (almost no side to side action)and with less traction you should set it more softer? Or is it completly something else? It seems there is no info about that.