Originally Posted by imran
im using a 3.3 nitro engine and last time i started my car it took me a good minute or two to start the car by pressing the button on the ezstart remote but finally it started so what could be the promblem also i have the traxxas nitro 4 tech 3.3 and i just got a new glow plug and i have using 30% sport nitro fuel by blue thnder.
It could be the wrong glow plug, or the high and low needles in the carb.
It is not good for the engine to take that long to start. Bad on the piston/sleeve, and bearings.
Check the heat range of the glow plug, make sure your igniter is fully charged, and set the high and low needles back to factory specs.
If you dont have the manual handy, go to google, type in Traxxas, and you should be able to get the high and low needle settings