Go Back  R/C Tech Forums > General Forums > Nitro On-Road
Serpent 733 1/10 200mm touring >

Serpent 733 1/10 200mm touring

Serpent 733 1/10 200mm touring

Old 08-06-2009, 04:21 AM
  #766  
Tech Regular
 
Joey4875's Avatar
 
Join Date: Apr 2008
Location: Chesapeake Beach
Posts: 354
Default

Mine was broke at the hinge too if your looking at the car from the front it was the one on the left
Joey4875 is offline  
Old 08-06-2009, 05:26 AM
  #767  
Tech Regular
 
Join Date: Jan 2008
Posts: 418
Default

Originally Posted by Joey4875
Mine was broke at the hinge too if your looking at the car from the front it was the one on the left
freaky... mine broke on the same hinge...
katze is offline  
Old 08-06-2009, 06:05 AM
  #768  
Tech Elite
iTrader: (4)
 
Shuhakimi's Avatar
 
Join Date: Mar 2006
Posts: 2,445
Trader Rating: 4 (100%+)
Default

Originally Posted by Joey4875
Mine was broke at the hinge too if your looking at the car from the front it was the one on the left
Hi, I am from Malaysia............is this(photos) what u mean?





all the fuel tanks had already been sent to Serpent Asia, and they will replace with the new IMPROVED VERSION....they promised
....just received the reply from Serpent Asia yesterday...they will ship out the fuel tank very soon

Last edited by Shuhakimi; 08-06-2009 at 06:16 AM.
Shuhakimi is offline  
Old 08-06-2009, 06:42 AM
  #769  
Tech Regular
 
Join Date: Jan 2008
Posts: 418
Default

Originally Posted by Shuhakimi
Hi, I am from Malaysia............is this(photos) what u mean?





all the fuel tanks had already been sent to Serpent Asia, and they will replace with the new IMPROVED VERSION....they promised
....just received the reply from Serpent Asia yesterday...they will ship out the fuel tank very soon
yes... same thing!!... so i presume my LHS where i got my kit from should replace it for free?
katze is offline  
Old 08-06-2009, 06:47 AM
  #770  
Tech Elite
iTrader: (19)
 
Pattojnr's Avatar
 
Join Date: Apr 2006
Location: Perth Australia
Posts: 4,594
Trader Rating: 19 (100%+)
Default

hope they get here in AU quickly.
maybe second batch kits the tank will be ok ?
Pattojnr is offline  
Old 08-06-2009, 12:15 PM
  #771  
Tech Champion
iTrader: (12)
 
RC MARKET's Avatar
 
Join Date: Feb 2007
Location: HK
Posts: 6,279
Trader Rating: 12 (100%+)
Default

Originally Posted by katze
yes... same thing!!... so i presume my LHS where i got my kit from should replace it for free?
contact now !
RC MARKET is offline  
Old 08-06-2009, 01:40 PM
  #772  
Tech Initiate
 
Join Date: Oct 2004
Location: Spydeberg, Norway
Posts: 31
Default

How much smaller front tires do you guys run? 2mm?
PetterS is offline  
Old 08-06-2009, 02:58 PM
  #773  
Tech Adept
 
serpentamerica's Avatar
 
Join Date: Dec 2008
Posts: 225
Default

Originally Posted by Joey4875
Mine was broke at the hinge too if your looking at the car from the front it was the one on the left
Originally Posted by katze
freaky... mine broke on the same hinge...
Originally Posted by Shuhakimi
Hi, I am from Malaysia............is this(photos) what u mean?

all the fuel tanks had already been sent to Serpent Asia, and they will replace with the new IMPROVED VERSION....they promised
....just received the reply from Serpent Asia yesterday...they will ship out the fuel tank very soon
Originally Posted by Pattojnr
hope they get here in AU quickly.
maybe second batch kits the tank will be ok ?
Hello guys, there are a few tanks from the first batch that have a defect. The factory is already working on it and a few samples of the new ones are already in USA and will be tested by one of our Team drivers in Homestead this weekend. As soon as we got confirmation that they are good, they will go in production. For all USA customers with a problem with the tank, we will replace for free plus free shipping. We will let all know when they are ready and how to proceed in order to get the warranty tank.

Thanks

Serpent America
serpentamerica is offline  
Old 08-06-2009, 03:24 PM
  #774  
Tech Fanatic
 
Join Date: Nov 2003
Posts: 826
Default Racing the 733 for the first time

Hello guys, i'm back from Toledo after a full week of testing. The main goal was to learn the car, test every single adjustment and come up with a basic setup. I test a lot, so much that i used around lots of sets of tires! Every time i put my car in the track it had something different in the setup, even thru the qualys and the final race.
I have to say that i am really impressed with the car. Not only with the performance, but also durability. I had no failures after a full week of abuse.
I came up with 2 setups, one with the std car ( i mean with whatever comes in the box) and another one changing stuff around. I still need to work a little bit more to improve the setup, but this is a good starting point. I think i will be able to have a good performance at the nationals.

So regarding the setup, this is the one out of the box:

Front
stock diff oil
0 droop
middle roll center position
car long
2mm caster in front of arm
5.5mm ride height
stock springs (blue) 1st hole
3 hole piston
40wt oil (1000 cst)
0.5 toe out
1.5 camber
stock sway bar, flush in the collar
ackermann in back position and narrow
198mm width

Rear
stock diff oil
3 droop
1st hole bottom pins
car long
camber link inner and 2nd position from bottom
2mm under link on inner position
6mm of ride height
stock springs (red short) 2nd hole
3 hole piston
40wt oil (1000 cst)
2.5 toe in on each side
3.5 camber
stock sway bar, inside hole in the arm and flush in the collar
199mm width

Tires
38F
40R or 42R
2mm split


This will be my starting setup for the Nats:

Front
200K diff oil
-1 droop
middle roll center position
car long
3mm caster in front of arm
5.5mm ride height
stock springs (blue) 1st hole
2 hole piston
1100cst
1 toe out
2 camber
stock sway bar, 2mm in the collar
ackermann in back position and narrow
198mm width

Rear
80K diff oil
3 droop
2nd hole bottom pins
car 1mm shorter
camber link inner and 1st position from bottom
2mm under link on inner position
6mm of ride height
Long pink spring 2nd hole
3 hole piston
40wt oil (1000 cst)
2.5 toe in on each side
3.5 camber
Soft Sway bar inside hole in the arm and 2mm in the collar
199mm width

Tires
35F or 38F
40R or 42R
2mm split


I used stock gearing for Toledo (17 - 22 / 60 - 54)

Hope this info can help
Paolo M is offline  
Old 08-06-2009, 03:25 PM
  #775  
Tech Fanatic
 
Join Date: Nov 2003
Posts: 826
Default

Originally Posted by PetterS
How much smaller front tires do you guys run? 2mm?
yes 2 mm split
Paolo M is offline  
Old 08-06-2009, 03:25 PM
  #776  
Tech Fanatic
 
Join Date: Nov 2003
Posts: 826
Default

Originally Posted by Joey4875
Mine was broke at the hinge too if your looking at the car from the front it was the one on the left
I was lucky, mine was fine. Will be fixed really soon
Paolo M is offline  
Old 08-06-2009, 03:28 PM
  #777  
Tech Fanatic
 
Join Date: Nov 2003
Posts: 826
Default

Originally Posted by ~McSmooth~
Standard position.

There was no oversteer with this setup on the Toledo track.



I didn't try the Stratus body. I plan to do that soon, as well as the Altis.

As for tires, I know Paolo was running 38F/40R early in practice, but I don't know what he finished with.

I ran 35F/40R in qualifying, but ran the harder compound for the longer mains and discovered I liked those tires better.
Good to see you at the GLC and congrats on your run. see you at the Nats!
Paolo M is offline  
Old 08-06-2009, 05:19 PM
  #778  
Tech Elite
iTrader: (18)
 
Serpent-Dan's Avatar
 
Join Date: Dec 2007
Location: Florida
Posts: 2,970
Trader Rating: 18 (100%+)
Default

Paolo are you still setting up your ride height with the hudy set-up fixtures to 7.5 then adjust with tire height. Thank you
Serpent-Dan is offline  
Old 08-06-2009, 05:28 PM
  #779  
Tech Apprentice
 
DayDAY's Avatar
 
Join Date: Jul 2009
Location: Hong Kong
Posts: 59
Default

Originally Posted by quietstorm76
I wouldn't use the 9254, they're only rated at 4.8 volts and it only has 47oz/in of torque. The 9402s are better, they are just analog. I'm running 9452's throttle and steering and they fit and work really well.
Hi Quietstrom76, thanks for the prompt advise, will check them out at LHS. Any other sugguestions from other owners?? as I am going to check this weekend...thanks
DayDAY is offline  
Old 08-06-2009, 06:02 PM
  #780  
Tech Addict
 
rocca30's Avatar
 
Join Date: Apr 2004
Location: fl
Posts: 589
Default

Originally Posted by Paolo M
Good to see you at the GLC and congrats on your run. see you at the Nats!
whats up paolo? must be tuff having to race 4 a week.
rocca30 is offline  

Thread Tools
Search this Thread

Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service -

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.