YR4Dude

iTrader: (44)

What's the advantage to using those? Is it just a matter of saving weight and rotating mass?

I've thought about those too but I am concerned about durability. Also, I'm wondering if it would mesh better than the steel gears thereby making them suitable for use for lighter weight diff fluids. The original steel diff didn't mesh so well with the kit stock 30000 fluid but it did better with the heavier fluids like 80000 on up.

Pattojnr

iTrader: (19)

i thaught thats what Salven had in his 733 when he had to change rear diffs During the Main, due to Failure ? cant remember which race, but it wasnt that long ago.

Michael_T

iTrader: (52)

Is there a gear chart available anywhere for the 733?

Thanks.

Pattojnr

iTrader: (19)

http://www.serpent.com/product/903009/downloads/
drive Calculator, just enter the pulley sizes and spurs and pinions.

Ultraspeed84

iTrader: (45)

got to drive my car on a low traction trac today and love this car alot! i think im a serpent guy for life now! ran the car pretty well stock on setting other then a few minor changes. but all in all im very pleased with this car for sure...

rcpanama

I have raised my 733, for almost a year, in very difficult parking lot track, I had an excellent experience with this car, I will say has been the best car I had, the only issue was the tank, the car was strong enough, it behave excellent in a low traction track, this has been always my problem with the 720 & 710.
We will be having our endurance race in June, it is a four 30 minutes race (four different days), we do this to close the season, so I change all plastic parts with the new M type; change my Set Up, with the one DJ had the new track record. I when for practice, to check this Set Up and to see if there will be changes in the car, I have to say that I thought that it was impossible to improve this car more, I was wrong; this car has a lot to give for improvement. If I was happy with my car with stock Set Up and Standard parts from factory, now I am in Love with this car.
RCPANAMA

Rock Racing

iTrader: (38)

After a weekend of testing at the Xray Challenge this past weekend, I was the only SERPENT in the A-main hehehe. I started towards the back of the pack due to one 1 good qualifier, I made my way up to 5Th around 25 minutes into the race when my header spring broke.

Paolo, Thanks for the new wheels they are better than anything Ive used this year, cant wait until they are available.

Qualifier is Ralph Burch 36/10:14.287 (Rnd 4)
1-10 Open (A Main)
Top 5
Average
Sponsor Top 10 Top 20
37224

Ralph Burch 1 1 201 60:01.602 17.057 17.101 17.141 17.185 1
Dirk Wischnewski 2 2 199 60:26.038 17.076 17.140 17.173 17.209 2
Paul Lemieux 3 6 197 60:13.156 16.986 17.059 17.109 17.176 6
Scott Rister 4 9 192 60:08.132 17.513 17.574 17.613 17.652 9
Diatta Collymore 5 12 182 60:15.758 17.398 17.449 17.513 17.576
Alexander Hagberg 6 3 180 60:11.134 17.267 17.334 17.365 17.404 3
Spatan Biagio 7 4 178 56:42.669 17.248 17.266 17.303 17.340 4
Hudy Jurai 8 10 173 60:14.055 17.903 18.016 18.088 18.159 10
Hudy Martin 9 8 172 60:14.182 17.622 17.673 17.710 17.758 8
Robert Rocha 10 11 58 18:10.980 17.561 17.737 17.802 17.875
Teemu Leino 11 5 53 34:44.115 17.502 17.640 17.725 17.848 5
Renaux Jerome 12 7 24 7:23.041 17.332 17.400 17.517 17.717 7


I love this car!

GMartinez

iTrader: (91)

Congrats Rob
If your going to the worlds Good Luck

SalvadoriRacing

thanks for the info.........

do you have quali results with best laps, etc????

and how was the traction compared to the prewc event?

Mie3R

iTrader: (9)

DJ
u got PM.

Serpent-Dan

iTrader: (18)

Which rubber or wheels might these be?? Good showing for the snake at the Texas race Rock

Paolo M

Robert, thanks for representing Serpent so well and for the test work you and Jeremy did for me. I appreciated a lot


Robert tested some pre-production Matrix Carbon tires on Multi Spoke Wheel (Kyosho Style Zero Off Set)

Serpent-Dan

iTrader: (18)

Cool they must look as good as the carbon velocity u ran

Ultraspeed84

iTrader: (45)

is the jaco rims zero offset anyone know?

YR4Dude

iTrader: (44)

The Jacos come in either 0 or 1mm offset. However the norm is 0 offset.