Shepherd Velox V10
#676
Tech Elite
iTrader: (1)
Hey guys,
And @ SLO-MTX4
We do not have the "problem" with the 8th scale, we changed the material and made the chassis a little bit softer for easier handling on low grip surfaces.
Unfortunately it was a little to soft for some tracks and drivers so the chassis was bending quiet easy if you crash or even touch a board.
regards
Alex
And @ SLO-MTX4
We do not have the "problem" with the 8th scale, we changed the material and made the chassis a little bit softer for easier handling on low grip surfaces.
Unfortunately it was a little to soft for some tracks and drivers so the chassis was bending quiet easy if you crash or even touch a board.
regards
Alex
Sorry i probably worded that wrong, what you said was what i was meaning. Sorry for the confusion.
Daniel
#677
Tech Elite
iTrader: (15)
Hi Alex, i am not a Velox driver but i am passionate about the sport and watching new cars evolve into fast machines, i love the competition.
I believe you should send Michael aka Novarossi to the worlds, he is also very passionate and each week he dreams of being the world number 1 he would be an asset on the Shepherd team
I believe you should send Michael aka Novarossi to the worlds, he is also very passionate and each week he dreams of being the world number 1 he would be an asset on the Shepherd team
#678
Tech Elite
iTrader: (52)
Hi Alex, i am not a Velox driver but i am passionate about the sport and watching new cars evolve into fast machines, i love the competition.
I believe you should send Michael aka Novarossi to the worlds, he is also very passionate and each week he dreams of being the world number 1 he would be an asset on the Shepherd team
I believe you should send Michael aka Novarossi to the worlds, he is also very passionate and each week he dreams of being the world number 1 he would be an asset on the Shepherd team
BTW, rcmushroom is selling your car in the "clearance bin" for only $345
#679
hi there anyone having trouble with the lipo for the v10 as iam on my second battery ?
#681
Tech Regular
I've just ordered one of these
http://www.rc-mushroom.com/product_i...ducts_id=16012
it's gona be a tight fit at 68mm long but lot cheaper than the other LiFe batteries out there, lot better option than lipo too, no regulators needed
http://www.rc-mushroom.com/product_i...ducts_id=16012
it's gona be a tight fit at 68mm long but lot cheaper than the other LiFe batteries out there, lot better option than lipo too, no regulators needed
#682
Tech Regular
Is there anyone in the US selling parts yet?
#683
Tech Apprentice
morning,
check this out
http://www.cefxspeedshop.net/
Josh Cyrul is the exclusive distributor for the US of A
You can also contact him to get information about a hobby shop in your area.
@ awins
wich battery do you use, did you use the shepherd Li IO Battery with 1800mAh.
If yes you have to be sure to charge it in the right way.
It is a 2cell Li Io battery with an PCM modul that will protect the battery.
No shortcut, no deep discharge and no overcharge.
But if you charge it the wrong way you can probably destroy it, same like with
the Li Po ?
regrads
Alex
check this out
http://www.cefxspeedshop.net/
Josh Cyrul is the exclusive distributor for the US of A
You can also contact him to get information about a hobby shop in your area.
@ awins
wich battery do you use, did you use the shepherd Li IO Battery with 1800mAh.
If yes you have to be sure to charge it in the right way.
It is a 2cell Li Io battery with an PCM modul that will protect the battery.
No shortcut, no deep discharge and no overcharge.
But if you charge it the wrong way you can probably destroy it, same like with
the Li Po ?
regrads
Alex
#685
V10 easy to drive??
Hi to all v10 drivers here,
how is the handling of v10, is it easy to drive
out of the box with the stock setting? Is it durable as well??
how is the handling of v10, is it easy to drive
out of the box with the stock setting? Is it durable as well??
#686
Hello,
the Chassis plate has some holes for weights like V8. When will they be available for the V10? And do you plan some other upgrade parts to spend some money on?
Cheers
the Chassis plate has some holes for weights like V8. When will they be available for the V10? And do you plan some other upgrade parts to spend some money on?
Cheers
#687
Tech Apprentice
hey there,
hope you are all fine.
Well, about the optional parts, we are still testing a few parts that will be released.
For sure we will have a front oneway/solidaxle with lightweight outdrives,
for sure we will have some weights for the front, i think we will make two
different for the front as you need one if you use the differential and on if you use the one way !!
Also we will have a stronger spring for the servosaver for high traction, these are in stock already.
We will leave for the worlds warm up on 28. of february and will have some days of testing. After that we know more about needed parts.
So stay tuned
regards
Alex
hope you are all fine.
Well, about the optional parts, we are still testing a few parts that will be released.
For sure we will have a front oneway/solidaxle with lightweight outdrives,
for sure we will have some weights for the front, i think we will make two
different for the front as you need one if you use the differential and on if you use the one way !!
Also we will have a stronger spring for the servosaver for high traction, these are in stock already.
We will leave for the worlds warm up on 28. of february and will have some days of testing. After that we know more about needed parts.
So stay tuned
regards
Alex
#688
#689
Suspended
#690
Tech Apprentice
We have no secrets !!
Josh, Jilles, Daniele, Patrick are the works team drivers, and of course some other guys will be there.
Marc will not come with us to the warm up race.
Alex
Josh, Jilles, Daniele, Patrick are the works team drivers, and of course some other guys will be there.
Marc will not come with us to the warm up race.
Alex