2008 IFMAR 1/10 200mm On-Road World Championships: Aug 7-17
#436
From RedRC:
" During the end of the last round of qualifying IFMAR received a protest against the Sirio 2611 muffler.
The Protest was not accepted due to the wording in the Protest.
However, based on a discussion at the 1/10th Section meeting, held on Thursday evening the IFMAR committee has decided that from Friday 15th, on the pipe 2611 in its new version/layout is not allowed.
There are 2 versions in the market from the 2611 pipe, but IFMAR has no information about a changed in the design of this muffler and will only accept the old version.
The results from qualifying will remain as it is.
The old version has a normal tailpipe of about 16mm with a striaght design.
The new muffler design has a shorter tailpipe of abut 12mm and a thicker wall with a conical design.
On behald of IMFAR
Dallas Mathiessen, President
Sander de Graaf, IFMAR IC Section Chairman"
" During the end of the last round of qualifying IFMAR received a protest against the Sirio 2611 muffler.
The Protest was not accepted due to the wording in the Protest.
However, based on a discussion at the 1/10th Section meeting, held on Thursday evening the IFMAR committee has decided that from Friday 15th, on the pipe 2611 in its new version/layout is not allowed.
There are 2 versions in the market from the 2611 pipe, but IFMAR has no information about a changed in the design of this muffler and will only accept the old version.
The results from qualifying will remain as it is.
The old version has a normal tailpipe of about 16mm with a striaght design.
The new muffler design has a shorter tailpipe of abut 12mm and a thicker wall with a conical design.
On behald of IMFAR
Dallas Mathiessen, President
Sander de Graaf, IFMAR IC Section Chairman"
#437
Barry should go through this like a hot knife through butter. I'd say 5 laps ahead at least
I hope he got rid of his bad luck. Crossing my fingers for the fabulous.
I hope he got rid of his bad luck. Crossing my fingers for the fabulous.
#438
Rossi history http://www.rossienginesusa.us/SGME/R...AXE_Rossi.html
Mario Rossi i believe is a Cousin of Novarossi and AxeRossi family.
On topic though Josh has been giving us good reports and it seems that there is plenty happening.
Thanks Josh for taking teh time and making teh effort its much appreciated.
Good luck with your run Josh !!
Sad to hear that a reputable company would take a chance by using a product that is not allowed. Very Sneaky of Sirio.
Good of EFRA to finally sort it out.
Mario Rossi i believe is a Cousin of Novarossi and AxeRossi family.
On topic though Josh has been giving us good reports and it seems that there is plenty happening.
Thanks Josh for taking teh time and making teh effort its much appreciated.
Good luck with your run Josh !!
Sad to hear that a reputable company would take a chance by using a product that is not allowed. Very Sneaky of Sirio.
Good of EFRA to finally sort it out.
#439
Darn, he was struggling like hell again. Not his race I guess.
#440
Tech Adept
Is Barry out now with his P3 finish i that run?
#442
1st for Rafael angulo and 3rd for Barry Baker.
might get in on time, guess we have to wait and see.
might get in on time, guess we have to wait and see.
#443
Top three from each final bump up until they get to the Semi finals then it is the first two from each race and the next two fastest from either heat.
see Rule 2.9 http://www.world-championship-2008.c...track_2008.pdf
Cheers Al
see Rule 2.9 http://www.world-championship-2008.c...track_2008.pdf
Cheers Al
#445
Tech Master
Letīs hope
3. Brandt Mickael SE - 56 / 00:20:00.191 - Xray / Sirio / Xray (1/512 - B Bump)
and
2. Karlsson Henrikl SE - 57 / 19:56.186 - Serpent / Novarossi / GQ
can Bump all the way!
3. Brandt Mickael SE - 56 / 00:20:00.191 - Xray / Sirio / Xray (1/512 - B Bump)
and
2. Karlsson Henrikl SE - 57 / 19:56.186 - Serpent / Novarossi / GQ
can Bump all the way!
#447
I root for Dirk Stammler DE
#449
Tech Master
#450
Tech Master
I root for SE, LRP, Josh Cyrul and Paul Lemieux