Rc10ntc3
#4801
Tech Adept
... oh what about the 3racing Aluminum shock tower+graphite shock mount? Any good?
#4804
Tech Initiate
NTC3 Clutch
I've read several places where someone stated to use a Centax Clutch on the NTC3. If you 've done this. Could you tell me which Centax Clutch to get.
Also, could you guys offer any suggestions on other parts to replace that will aid in making this car handle better and help strenghthen it.
Thanks,
muddywaters
Also, could you guys offer any suggestions on other parts to replace that will aid in making this car handle better and help strenghthen it.
Thanks,
muddywaters
#4805
Tech Adept
nice ... anybody know where to find the RPM bumper online? I tried SpeedTech and MicroRCshop but I couldn't find any RPM products.
#4806
Tech Elite
iTrader: (1)
Originally posted by chorner
... oh what about the 3racing Aluminum shock tower+graphite shock mount? Any good?
... oh what about the 3racing Aluminum shock tower+graphite shock mount? Any good?
BTW even at 5 mph you should expect to do damage to you car because IT'S A CONCRETE CURB and that will not move or absorb any impact. Try driving your 1:1 car into a concrete block at 5 mph and then tell me how much it'll cost to repair the damage.
#4808
Tech Adept
Stormer hobbies also have rpm parts....
#4809
Tech Initiate
"The Fix"
I just bought the NTC3 and have been assembling it here and there for a few days now. This is not my first RC though. I've built several 8th Scale Off-road Buggies and Stadium Trucks plus a couple of Impacts. I am hoping to find suggestions on the necassary upgrades(ie. ti turnbuckles, sway bars, one-ways, etc) before I assemble the whole kit.
I've been reading post on this thread all day. Well, in between the "Honey Doos." lol I keep hearing about "the fix." What is it, will I need it and where can I get it.
Hopefully, my intentions with the NTC3 will not offend you guys. But, me and my son are building it to Race around the Parking Lots. I have a few Impacts I built for me with 21's and this is gonna be for my son. It's getting the NS12 5Port. Regrettably, we do not have no on-road tracks near where we live. We do prep an area in the parking lots with blowers and brooms. They are mostly Drag Racing and making Top Speed passes. I am planning to get the accessories needed to set up a road coarse.
I was hoping someone can advise me which direction to go with this car. This way I can build it with the recommended parts the first time. Instead of assembling the kit now and having to rebuild it with the suggested parts later.
Thanks in advance,
muddywaters
I've been reading post on this thread all day. Well, in between the "Honey Doos." lol I keep hearing about "the fix." What is it, will I need it and where can I get it.
Hopefully, my intentions with the NTC3 will not offend you guys. But, me and my son are building it to Race around the Parking Lots. I have a few Impacts I built for me with 21's and this is gonna be for my son. It's getting the NS12 5Port. Regrettably, we do not have no on-road tracks near where we live. We do prep an area in the parking lots with blowers and brooms. They are mostly Drag Racing and making Top Speed passes. I am planning to get the accessories needed to set up a road coarse.
I was hoping someone can advise me which direction to go with this car. This way I can build it with the recommended parts the first time. Instead of assembling the kit now and having to rebuild it with the suggested parts later.
Thanks in advance,
muddywaters
#4811
bearings 4 jscamery
just thought i'd let you know i saw some rubber sealed
bearing kits for the ntc3 for $30 and this is a complete set
for the whole car they have them at tq hobbies which is not
far from oviedo at all just thought i'd let you know
and i have also noticed my ntc3 eats the bearings you mentioned
occasionaly , most often this happens after i have bent the
alluminum cvds. this i believe causes the bearing to go too
oh well good luck later
sb
bearing kits for the ntc3 for $30 and this is a complete set
for the whole car they have them at tq hobbies which is not
far from oviedo at all just thought i'd let you know
and i have also noticed my ntc3 eats the bearings you mentioned
occasionaly , most often this happens after i have bent the
alluminum cvds. this i believe causes the bearing to go too
oh well good luck later
sb
#4813
Tech Adept
wheel bearings
to stop the bearings from breaking , stop hittting the boards and/or crashing , i have the original bearings in my car since the beginning of the season ,,,
in regards to the fix, ,,, please read the last few pages,,, especially pages 1-161 lol ,, i know there is alot , but the info gathered there is invaluable,,, and a brief explanation wont do it justice
frank13
in regards to the fix, ,,, please read the last few pages,,, especially pages 1-161 lol ,, i know there is alot , but the info gathered there is invaluable,,, and a brief explanation wont do it justice
frank13