Rc10ntc3
#1801
Tech Addict
iTrader: (4)
Re: Re: PIPE
Originally posted by Corse-R
Pipes when are crushed and 'repaired', never goes to be the same (you experienced it now). My best advise is the same as time ago: change the pipe and choose the 2 chamber. Exhaust is better with the optional one (all AE officials use them and are allowed to use the one chamber). Better stick to the two chambers, is expensive, but notice an improvement on performance.
Pipes when are crushed and 'repaired', never goes to be the same (you experienced it now). My best advise is the same as time ago: change the pipe and choose the 2 chamber. Exhaust is better with the optional one (all AE officials use them and are allowed to use the one chamber). Better stick to the two chambers, is expensive, but notice an improvement on performance.
#1802
Re: Re: Sirio 12Trp
Originally posted by Corse-R
Only needed to use the 20/26 one time and few times I used 21/26 with the RB (very strange motor, needs 'some help' for scream on the backstraights, expecting the 215 model is better than the 210).
Only needed to use the 20/26 one time and few times I used 21/26 with the RB (very strange motor, needs 'some help' for scream on the backstraights, expecting the 215 model is better than the 210).
#1803
Re: tc3
Originally posted by isuzuguy
i've already have downloaded and printed off copies of barry's
set-ups as well as the team drivers ,but there nothing for revelation. and there are alot of tc3 drivers at that track so i though that someone could give me a good set-up they like to run there...
i've already have downloaded and printed off copies of barry's
set-ups as well as the team drivers ,but there nothing for revelation. and there are alot of tc3 drivers at that track so i though that someone could give me a good set-up they like to run there...
The track is so big and swoopy that a one-way should work really well, although I haven't tried one yet.
#1804
Tech Fanatic
ntc3 lola
hi , would like to find out if NTC3 can be fittted with a lola body?
if so please advise on whta is required.
thanks
if so please advise on whta is required.
thanks
#1805
i belive that u have to cut parts out of the body to the fit the front shock tower or some have cut down the shock tower
note i havent had first hand experiance with it thats just what i have seen
note i havent had first hand experiance with it thats just what i have seen
#1806
why isnt anyone posting here anymore?
#1807
Tech Addict
i don't know. all i know si that the mugen MTX-3 is the most active thread now(i wonder why )
#1808
yeah, damn mtx3 drew ppl in like zombe's
#1809
tc3's are junk stock
#1810
Tech Addict
................i beleive u jus started a flame war
everyone!!!! take cover
everyone!!!! take cover
#1811
yes i did. lets get it on!
#1812
why say shit thats how shit gets started
#1813
Tech Addict
ladies and gentlemen:
in the red corner, weighing 77posts in total, Bbbbbbbbret!
and in the blue corner, wiehging a whopping 155 posts, novaaaaaaaa racer!
in the red corner, weighing 77posts in total, Bbbbbbbbret!
and in the blue corner, wiehging a whopping 155 posts, novaaaaaaaa racer!
#1814
it was a joke i thought this thred was dead.
kind of like if a tree falls in the woods and nobody is there to hear it did it relly fall.
if a bear farted in his cave and i smlled relly bad, if you werent there to smell it did it smell at all
kind of like if a tree falls in the woods and nobody is there to hear it did it relly fall.
if a bear farted in his cave and i smlled relly bad, if you werent there to smell it did it smell at all
#1815
Tech Addict
lol