OFNA LD3 pro
#1696
Tech Master
LD3, but ask in the NTC3 forum and im sure they will say NTC3
#1697
Originally posted by macnkitty2002
all i know is that .8 is better than 1.0
all i know is that .8 is better than 1.0
#1698
Originally posted by adsl
the frame structures of LD3 and NTC3 are similar,
Which is better?
the frame structures of LD3 and NTC3 are similar,
Which is better?
LN4..........
That question deserved that answer!!!!!!
#1699
Tech Apprentice
Macnkitty2002,No I'm not the only one w/an rc out here,we got 2 lhs out here. They mostly drag race over here w/funny cars and stuff.one of the local dragers took second place in the winter finaly in s.florida last year so we get around.The parts I can't get here I order them from tower H & NH.
Also Havy I got peeps in bayamon & cauguas & vieques so next time i'm out that way i'll link up w/you to check out the tracks over their. I got a backyard setup track,it's two full and a half tennis courts that setup for circuit race.It's got aprox.135ft of straight and like 80ft wide. The car hooks pretty well for howit's setup I wanna try it on a bigger track and see how it dose... more fire
Also Havy I got peeps in bayamon & cauguas & vieques so next time i'm out that way i'll link up w/you to check out the tracks over their. I got a backyard setup track,it's two full and a half tennis courts that setup for circuit race.It's got aprox.135ft of straight and like 80ft wide. The car hooks pretty well for howit's setup I wanna try it on a bigger track and see how it dose... more fire
#1701
Tech Apprentice
yea its what ever they use on the top it what makes it so good. on some corners i'll just rip right thru no brakes to test the susp. and it stays planted. rubber or foam she stays put, a lil drift here & there but not squaking just want to run on a bigger track to see how i do.... more fire
#1703
Tech Rookie
SETUP
I am having trouble setting up my two LD3... Just a little back ground. I have a Tangerine pro and the reg 2sp ld3 with a CD3 conversion on the way. I also have a rs4 3 for bashing..
my ld3 have a mills os .12 tr and RB .12.
need help selecting gearing on the pinon and two speed spur gear. Also setting up the Camber, caster and toe for front and read. I recenlty purchased a setup station... Prior to this I was eyeballing.. and way off.
ALL help would be appreciated....
my ld3 have a mills os .12 tr and RB .12.
need help selecting gearing on the pinon and two speed spur gear. Also setting up the Camber, caster and toe for front and read. I recenlty purchased a setup station... Prior to this I was eyeballing.. and way off.
ALL help would be appreciated....
#1704
Tech Regular
Hey check back a couple of pages,
But my basic rundown:
front:
Caster: I have the upper arms all the way forward, no shims in front.
0 toe
2 deg camber
Rear:
1-1.5 deg toe
4 deg camber R, 4.5 deg L
Front diff, 120,000 Ofna wght, 6 gear
Rear diff, 50,000 Ofna wght, 4 gear
Front king pin mount 0 and 0
Rear 1.5 and 0 antisquat
Gearing stock
Fun, yes, handles loose but holds well when asked too
havy
But my basic rundown:
front:
Caster: I have the upper arms all the way forward, no shims in front.
0 toe
2 deg camber
Rear:
1-1.5 deg toe
4 deg camber R, 4.5 deg L
Front diff, 120,000 Ofna wght, 6 gear
Rear diff, 50,000 Ofna wght, 4 gear
Front king pin mount 0 and 0
Rear 1.5 and 0 antisquat
Gearing stock
Fun, yes, handles loose but holds well when asked too
havy
#1705
Tech Rookie
Thanks
I have read most of the thread... Just trying to get a feel for the tuning. I picked up a setup system. I tell you, my eye it method was sad.
Over the past few months I have just been practicing with the car, I was finding I was fighting it all over the track. So I tried some basic chassis setup and things got better.
I appreciate your response.
Hey the stock 3 shoe clutch is good for beginers like me. However my Tangerine LD3 with the centax is going to be a blast to drive.
Is it worth changing the 3 shoe on my rtr ld3 to a centax. I read back a little the mugen will fit. If I read this correct which versions will accept the ld3 gearing.
Over the past few months I have just been practicing with the car, I was finding I was fighting it all over the track. So I tried some basic chassis setup and things got better.
I appreciate your response.
Hey the stock 3 shoe clutch is good for beginers like me. However my Tangerine LD3 with the centax is going to be a blast to drive.
Is it worth changing the 3 shoe on my rtr ld3 to a centax. I read back a little the mugen will fit. If I read this correct which versions will accept the ld3 gearing.
#1706
Tech Regular
I plan to upgrade to 0.8 gearing so centax will be needed. I got to learn to set it up correctly though. The three shoe clutch has been reliable, I just set the idel on the motor to get the response I would like out of the turns (within reasonable limits, don't want to keep the revs up too long in idle).
Soo, I let someone esle tell you about the mugen centax.
Havy
Soo, I let someone esle tell you about the mugen centax.
Havy
#1707
Tech Rookie
I tell you... I have searched HI an LO for a good forum on LD3's. I have been out of RC for about 10 years and was bitten by the buy. Now I own three nitros and 2 ld3 with a cd3 conversion kit on the way and a bashing rs4 ss...
I have read most of the forum mail and have learned a lot without having to sift through a lot of junk...
MY RTR now has a os .12 tr and the tangerine a RB x12. My next major upgrade will be a decent radio system.. Looking at a KO mars R gold edition...
I have read most of the forum mail and have learned a lot without having to sift through a lot of junk...
MY RTR now has a os .12 tr and the tangerine a RB x12. My next major upgrade will be a decent radio system.. Looking at a KO mars R gold edition...
#1708
Tech Apprentice
macnkitty2002 I get together w/some friends on the weekend to race, but i'm always bashing the car around in front of my house my son gets a kick out of it.When he gets older he's gonna be my pit man. more fire
#1709
Originally posted by zleader
I tell you... I have searched HI an LO for a good forum on LD3's. I have been out of RC for about 10 years and was bitten by the buy. Now I own three nitros and 2 ld3 with a cd3 conversion kit on the way and a bashing rs4 ss...
I have read most of the forum mail and have learned a lot without having to sift through a lot of junk...
MY RTR now has a os .12 tr and the tangerine a RB x12. My next major upgrade will be a decent radio system.. Looking at a KO mars R gold edition...
I tell you... I have searched HI an LO for a good forum on LD3's. I have been out of RC for about 10 years and was bitten by the buy. Now I own three nitros and 2 ld3 with a cd3 conversion kit on the way and a bashing rs4 ss...
I have read most of the forum mail and have learned a lot without having to sift through a lot of junk...
MY RTR now has a os .12 tr and the tangerine a RB x12. My next major upgrade will be a decent radio system.. Looking at a KO mars R gold edition...