HPI R40 Nitro Car Forum
#1262
this thread got pushed down quite a bit. anyone try the 3racing parts or GPM stuff for their R40 (i know, GPM is notorious for awful QC, but the HK stuff seems ok).
#1263
Tech Rookie
Rubber Tire set up
Hi, where can I find a basic rubber tire set up for the R40? I tried to look in the HPI site but they only have foam tire setup. If you have any basic set up just to start off with, please share or post. Any info will be greatly appreciated. Thanks
#1264
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
here ya go gentlemen...
Adjustable rear sway bar for the r40.....soon to be here...
Also,there are a few more goodies in HPI's hopper for this car..HPI is commited to keeping this car RACE READY...
Adjustable rear sway bar for the r40.....soon to be here...
Also,there are a few more goodies in HPI's hopper for this car..HPI is commited to keeping this car RACE READY...
#1267
Regional Moderator
iTrader: (9)
One of the few things I'm not happy with on the car is the Rollbar/handle. First is how it functions as a handle. I think the top of it sits waaaay too close to the engine head. This seems to be just begging for burt fingers or hands. I guess wearing those Machanix Gloves would take the worry out of being burned, but the handle really should have been angled forward a bit. And Secondly is how if functions as a rollbar. I wish the bar was a little taller. The heatsink head on my new Sirio is level with the roll bar. What good is the roll bar if the heatsink head is at the same level as the bar?
Does anybody know of any aftermarket rollbar/handle that solve either or both of these problems? All the aftermarket one's I seen so far are exactly the same size as the stock unit.
-or-
Has anybody done any mods to make their's taller. The way the bar mounts makes it a little difficult to simply raise it with spacers. Any thoughts???
Does anybody know of any aftermarket rollbar/handle that solve either or both of these problems? All the aftermarket one's I seen so far are exactly the same size as the stock unit.
-or-
Has anybody done any mods to make their's taller. The way the bar mounts makes it a little difficult to simply raise it with spacers. Any thoughts???
#1269
Regional Moderator
iTrader: (9)
Well its handy for picking up the hot car when the body is off. And like I said, the second purpose of it is supposed to be rollover protection for your heat sink head. But with heatsink heads getting taller, the bar comes up a little short.
Also, if you happen to be running a Lola style body, the handle is quite useful.
Also, if you happen to be running a Lola style body, the handle is quite useful.
#1272
Tech Elite
iTrader: (2)
There's alot of stuff you can do to make the car much lighter. The main thing is to replace the front diff with a one-way. Then mount the reciever on the side of the servo. This will allow you to get rid of the on/off switch, the reciever box, a couple screws & some other things.
#1273
Regional Moderator
iTrader: (9)
Yeah, I'm not that desperate to make my car lighter. I like having a handle and the protection of the receiver box. I like having a on/off switch. And don't really care for a one-way on our particular track. At least not when I'm running mod electric or nitro.
The weight of the car really isn't a big concern for me. I plan on replacing the shock towers with graphite, adding the lightweight shafts, and maybe going with HPI's relieved upper deck. But thats about it. And not really in that big of a hurry to do those. Just something to do really...
The weight of the car really isn't a big concern for me. I plan on replacing the shock towers with graphite, adding the lightweight shafts, and maybe going with HPI's relieved upper deck. But thats about it. And not really in that big of a hurry to do those. Just something to do really...
#1274
Tech Addict
iTrader: (2)
3racing makes aluminum roll bar for r40. Or you can simply put vonerr handle bar (the aluminum one), but you have to drill new hole on the upperdeck.
http://www.3racing.com.hk/3racing/index.jsp
http://www.3racing.com.hk/3racing/index.jsp
#1275
i see so much stuff on the HPI japan site but its not available in state side yet.