HPI R40 Nitro Car Forum
10-06-2003, 09:38 PM
#601
Tech Rookie
Does anyone have probelems whit stering slop ??
10-07-2003, 01:30 AM
#602
Hey,
I'm getting a R40, my first Nitro kit !
Just wondering if you guys can help me with some questions?
Any Option Parts you guys would recommend?
One way?
Ofna Picco Engine?
Thanks for your time guys
I'm getting a R40, my first Nitro kit !
Just wondering if you guys can help me with some questions?
Any Option Parts you guys would recommend?
One way?
Ofna Picco Engine?
Thanks for your time guys
10-07-2003, 03:41 PM
#604
Tech Adept
Originally posted by pro3racer774
does the threaded aluminum shocks for the pro 3 fit the r40????
does the threaded aluminum shocks for the pro 3 fit the r40????
10-07-2003, 03:51 PM
#606
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
Originally posted by El`DiablO
Does anyone have probelems whit stering slop ??
Does anyone have probelems whit stering slop ??
HPI Japan.....for the r40..want it...
Last edited by fastharry™; 10-07-2003 at 04:33 PM.
10-07-2003, 06:39 PM
#607
are those lightweight motor mounts
10-07-2003, 07:29 PM
#608
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
yes
10-07-2003, 07:34 PM
#609
where did u get the pic from.
10-07-2003, 07:54 PM
#610
Tech Elite
iTrader: (4)
Join Date: Sep 2001
Location: Louisville, KY!.. USA!! ....Home of http://www.fastharry.com
Posts: 2,847
Trader Rating: 4 (100%+)
HPI Japan
10-08-2003, 02:34 AM
#611
Tech Adept
Just in!!
Mugen MTX3 Spare/Options/FastTires
HPI R40 kit Spare/Options
T-MAXX Options
Savage Options/Spares are coming
NTC3-coming soon
Full line of RD Logics Parts
Updating site.......
Check it out! Thanks!
JustRC
Mugen MTX3 Spare/Options/FastTires
HPI R40 kit Spare/Options
T-MAXX Options
Savage Options/Spares are coming
NTC3-coming soon
Full line of RD Logics Parts
Updating site.......
Check it out! Thanks!
JustRC
10-08-2003, 08:41 AM
#612
Originally posted by JLock
I will be packing up my stuff and heading out the the Worlds on Thursday. For any of the guys flying out, I will be the lone TX representative (see entry listing). You can find me with in the vehicle with TX plates. I will be bringing an ez-up and the like and should have some room under the tent for a couple of wayward racers.
I will be packing up my stuff and heading out the the Worlds on Thursday. For any of the guys flying out, I will be the lone TX representative (see entry listing). You can find me with in the vehicle with TX plates. I will be bringing an ez-up and the like and should have some room under the tent for a couple of wayward racers.
10-08-2003, 09:00 AM
#613
R40 2 speed settings
OK I'm having a bit of trouble getting my 2 speed to engage (or noticeing when it does engage) I have everything set per the instructions, and as we all know the instructions are a bit lacking.
I have the the ball bearing tightend down to leave a slight gap between the shoes and the spring loaded bolt out to about 5.5 turns from seated.
I'm running the stock gearing with the stock foams with a MT-12 for the powerplant with RDLogics onepeice pipe.
I'm pretty sure it's not kickin in cause my .26 powered savage can out run my R40 that should not happen.
I have the the ball bearing tightend down to leave a slight gap between the shoes and the spring loaded bolt out to about 5.5 turns from seated.
I'm running the stock gearing with the stock foams with a MT-12 for the powerplant with RDLogics onepeice pipe.
I'm pretty sure it's not kickin in cause my .26 powered savage can out run my R40 that should not happen.
10-08-2003, 09:28 AM
#615
thanks for the info I'll give it a shot should find out later today.