remove radio tray and engine/exaust and all the bearings,put all bearings without the rubber seals on al glass with brake cleaner , then spray denatured alcohol scrub with a clean microfiber cloth, spray again alcohol and blow with my compressor, then dry the bearings blowing with the compressor. put fresh high speed oil on all the bearings , reinstall the seals and the bearings. Now give the engine some LOVE, remove centax clean all the clutch components, remove piston/sleave , crank shaft lean with WD40 and scrub with clean microfiber cloth and rinse with brake cleaner and blow with the compressor. reinstall all engine parts with after run oil, put tha caps on the fuel inlet and exaust/intake port and wait to the next race!!!
it is like going to church on sunday,like a ceremony!!!
Byron's Racing Fuels/Airtronics