mtx-3 rear outdrives
#1
mtx-3 rear outdrives
Im sure that this queston has been asked, but i cant seem to find it....so....here it goes again
How do i fix the problem with the rear outdrives?
(the "slop" problem)
is there another way to solve this? instead of installing shims
and if shims are the only choice, what are the sizes which u MTX-3 owners use?
thanks
How do i fix the problem with the rear outdrives?
(the "slop" problem)
is there another way to solve this? instead of installing shims
and if shims are the only choice, what are the sizes which u MTX-3 owners use?
thanks
#2
OH NO!!
Fastharry is really going to jump on this one.
#3
The reason it seems to have a lot of slop is because the hex adapter doesn't snug up against the bearing's inner race. Only shims would fix that but I dont know the exact size/thickness.
#5
Re: thx
Originally posted by B
thanks
do u know any aftermarket hex adapters which will snugly fit ?
thanks
do u know any aftermarket hex adapters which will snugly fit ?
#6
I have both the Mugen and 3Racing hex adapters and both doesn't snug up against the bearing.
The Kawahara hex adapters that comes with the 1mm spacer should help.
The Kawahara hex adapters that comes with the 1mm spacer should help.