Kraceway

I have not gotten a chance to cross reference the parts# but the grey springs are softer than white

shambmk

Hi guys,i am facing this problem.Car does not go straight when exit corners.Does it got to do with the servo saver.Though was the servo problem.Change a new servo still the same.Anyone knows what to be done?

GMartinez

iTrader: (91)

check your radio settings steering throw,balance & also check your steering links servo links

Seisick

check the front uprights, perhaps overtied

fossil

Be sure the front sway bar sections have not become located inside each other too tightly causing a bind in the car reaction. This causes the lower arms to lock up after a turn and the car drifts back and forth until they loosen a bit.

Check for a bent upper or lower arm hinge pin that is bent or has come loose from the blocks. The same symptom can happen.

Remember to check the rear arms too. A loose or broken arm back here can throw the rear tweak off, and this will affect the front tweak also causing the car to hook or push straight when exitting a corner.

Something is causing the car to tweak out of the corners on acceleration.

Gee.... how do I know that?? LOL

GMartinez

iTrader: (91)

Finally my M3 Evo is ready for this weekend Florids State Race #7
will post results after this weekend if your bored & want to see it live www.forgass.com click on redcup live we will be running Saturday & Sunday live feed should be up after 10AM U.S. time

Teamcastagna

Hey good morning, what hop ups have you found to be effective...... This is the only car that no one does hop ups for it apart from kyosho

GMartinez

iTrader: (91)

The only option part that I am running is cvd's all around other than that the car is box stock,I will be adding 2 more options aluminum middle pulley mt & aluminum front body post I don't see a need to add any other hop up the car works perfect

2056dennis

iTrader: (134)

hey guys where is a good place to get parts for the m3 evolva thanks in advance

rpoage

iTrader: (2)

I'm a little biased but we stock full parts support for kyosho and Amain also supports the car. Both sites are real time inventory. There may be others.

davidl

iTrader: (41)

There was an M3 EVO in the final at the 2011 World Championships in Florida. What was the story on this car? Combinations? Upgrades?

GMartinez

iTrader: (91)

Yes there was an M3 Evo driven by Shimo the proto type parts were machined aluminum rear bulk heads with new plastic inserts,split upper deck for more flex other than that no one knows if it will be released as an option or be released as well since the designer left the company

GREGORY!

iTrader: (1)

this is wrong.Shimo had the regular evo model with psastic bulkheads and solid upperplate.
no evo2 model in the main.

GMartinez

iTrader: (91)

Greg this is 1/8th there was never an evo 2 so u must be confussed Shimo & Collari ran the M3 prototype at the worlds that is for sure u can go to redrc.net check out the gallery & you will see it

GMartinez

iTrader: (91)

http://events.redrc.net/?s=kyosho+pr...earchbutton=Go