GT class--buggy-based on road!
#4426
Tech Addict
iTrader: (43)
Looking for a GT.
If anybody is letting go of a decent GT class car I am looking. I'm partial to properly broken in force .28 but I am basically looking for a GTP,DM1 spec or regular,or inferno GT1 or 2 with a working 2 speed and life on the engine. Not worried about the body or electronics. Thanks inadvance.
#4427
Hello Guys, I am looking for a good clutch and engine mounts for my Inferno gt since I swapped the engine with a Nova 21, I would like to know what aftermarket setups are out there that will work? I was thinking maybe the Losi 8ight 4 shoe clutch but not sure if the GT bell will fit in that clutch, also was thinking about the Fioroni Vario and the Ascendancy Effortless Clutch system.
If you have a decent setup for sale let me know.
If you have a decent setup for sale let me know.
i dont know if this fit
http://www.amainhobbies.com/product_...Mount-Extended
http://www.amainhobbies.com/product_...or-Mount-Black
#4429
Tech Fanatic
iTrader: (12)
Dynamite Max-Life Aluminum Clutch Shoe Set
This clutch last longer then any other 3 shoe set I have used to date (by far) and works great for me with 1.0 springs. Just be sure to knock the burs off after a race this will extend the life and function.
I have tried a few 4 shoe sets and the main difference to me was price.
Stick with the 3 shoe setup it works well.
This clutch last longer then any other 3 shoe set I have used to date (by far) and works great for me with 1.0 springs. Just be sure to knock the burs off after a race this will extend the life and function.
I have tried a few 4 shoe sets and the main difference to me was price.
Stick with the 3 shoe setup it works well.
#4430
Tech Elite
iTrader: (1)
Dynamite Max-Life Aluminum Clutch Shoe Set
This clutch last longer then any other 3 shoe set I have used to date (by far) and works great for me with 1.0 springs. Just be sure to knock the burs off after a race this will extend the life and function.
I have tried a few 4 shoe sets and the main difference to me was price.
Stick with the 3 shoe setup it works well.
This clutch last longer then any other 3 shoe set I have used to date (by far) and works great for me with 1.0 springs. Just be sure to knock the burs off after a race this will extend the life and function.
I have tried a few 4 shoe sets and the main difference to me was price.
Stick with the 3 shoe setup it works well.
Other good alternative is to try carbon/composite shoes as the hotbodies D8 buggy stock ones, or ultimate ones ... they give you a nice grab/punch, low wear and longer bearings life ...
cya !
#4431
Tech Adept
Should do the trick
#4432
#4433
they have this also
http://www.amainhobbies.com/product_...Mount-Standard
#4434
Tech Elite
iTrader: (18)
At the local track Saturday with a friend putting his sedan through it's pace and was gonna do the same to his DM-1 but his crank shaft was bent so stripped the two speed gears. The other GTs at the track looked like they were on ice. Temp was about 64. The all had G_P tires(don't wanna say the name) but as got to telling one of the guys it was the tires. I told him of the way the Inpenema slicks worked and he had a set in his bag. His car was nite and day. Best tires made. He got off the stand all smiles
#4435
Body Options for IGT2...
Hello all
I recently picked up an Inferno GT2 and I was wondering what the body options were. Any info is appreciated.
Thanks
I recently picked up an Inferno GT2 and I was wondering what the body options were. Any info is appreciated.
Thanks
#4437
Tech Elite
iTrader: (4)
Kyosho Corvette
Kyosho Audi
Kyosho McLaren
Kyosho Astin Martin
Ipanema Warrior
Alpha Audi R8
If you are going to race, the Ipanema Warrior or Kyosho Corvette would be the choices for big track racing. Can't really tell you much about the rest of the bodies because I never owned one of them for the GT2. As this class grows, there may be more bodies coming down the road. Until then, got to roll with what we have.
#4438
#4439
Tech Adept
#4440