GT class--buggy-based on road!
#2956
Tech Fanatic
iTrader: (12)
You driving too!?! I will be pulling out of Dallas, TX around midnight/1am. I should be getting into Homestead very late Thursday or early Friday depending. I have driven straight through from Dallas to Las Vegas, NV in 18 hrs straight so this drive should be a piece of cake. See you when I get there.
Be care full driving I took 2 stops for a cat nap. See you there
#2958
Tech Addict
#2959
Tech Fanatic
iTrader: (1)
Join Date: May 2003
Location: Was in Toledo, OH now Battle Ground, WA
Posts: 833
Trader Rating: 1 (100%+)
Does anyone know yet when the internet feed will be up? I can't wait to see the photos!!!!!
#2960
I will be leaving the shop after six, so if anybody needs any last minute items let me know. See you all in homestead.
#2961
Tech Regular
#2962
Tech Elite
iTrader: (1)
Guys, i will be online most of the time during the event, so if anyone want to post pics here, just email me to [email protected] and i will post them here.
Jeff, talked with Volker Geldres, owner of www.buggy-sport.info and he agreed into post GT Class results and podiums on his website once the event its over if you want/need to ... so just send me the stuff and i will post it there ...
cya and have a great weekend of GT Nitro Burning ...
Jeff, talked with Volker Geldres, owner of www.buggy-sport.info and he agreed into post GT Class results and podiums on his website once the event its over if you want/need to ... so just send me the stuff and i will post it there ...
cya and have a great weekend of GT Nitro Burning ...
#2963
Tech Elite
iTrader: (4)
Hello everyone,
Just bought the K Inferno GT2 Audi DTM kit and will be receiving it shortly.
Need to know what K parts I need to get to update the steering and brake linkages;
What Rx batt config the batt box accepts?;
Better wheels and tires that I need to get for racing or parking lot running?
And what upgrade parts are needed and nice to have, Kyosho or other brands out there?
Will use the current engine and pipe for the meantime until then.
Thanks in advance for the help and info.
Jun R.
Just bought the K Inferno GT2 Audi DTM kit and will be receiving it shortly.
Need to know what K parts I need to get to update the steering and brake linkages;
What Rx batt config the batt box accepts?;
Better wheels and tires that I need to get for racing or parking lot running?
And what upgrade parts are needed and nice to have, Kyosho or other brands out there?
Will use the current engine and pipe for the meantime until then.
Thanks in advance for the help and info.
Jun R.
#2964
How about the the steering and brake linkages? Any advice with that area? I'm planning to change the 2nd gear as you mentioned after breaking in the motor and also updating the servos. I read that Kyosho came out with an updated 2 speed tranny for the gt cars, will look into that as well.
Any more additional info/tips from anyone would be very helpful and appreciated.
#2965
Tech Addict
Jun I would change the transmision to the Ipanema one. The breaks people change them to the ones from the truggy. Also most the tires need to go, Ipanema has the best tires that I have tried so it is a sure thing to go with them for that as well.
#2966
>>How about the the steering and brake linkages?
Replace the z-link by a Kyosho steering rod/turnbuckle for MP777, for example
Brake is ok without mods
Replace the z-link by a Kyosho steering rod/turnbuckle for MP777, for example
Brake is ok without mods
#2967
I'm at Homestead Raceway. Drivers from all over are starting to show up and check out the track. I've spoken to racers from as far away as Utah, Illinois, Maryland, Peru and Chile so far. This is going to be fantastic!
#2969
Tech Adept
anyone know when the liverc feed will be up for this race
#2970
Do the ones from Utah speak english?? Tell them Zoot asked....