Trinity G4 - Team Magic G4 E-Type
#2221
Guest
Hi Guys just wondering I just got my pro G4 kit and the rear diff is a geared diff. Is that standard in this kit. If so is there a optionial Ball diff I can get for it or does the geared diff work ok? I have raced for many year but only in electric and have made the move to gas so sorry for all my questions.
Thanks again for your help
Thanks again for your help
#2222
Tech Regular
the geared diff is standard with the g4, and works fine, i believe team magic have just releast a ball diff, but i don't see the benifits, i ran a ntc3 which has ball diffs and they were a pain in the arse. you can build your geared diff and forget about it.
#2224
Had any luck finding the "red" clutch shoe?
#2226
Tech Fanatic
The stock clutch shoes should work just fine... I think I've seen the red ones online like RC-Mart I think... The best thing to do is change the clutch spring to the Yokomo hard spring... The Mugen spring is way to hard and won't work correctly... Try the Yokomo hard spring, make sure your tranny is shimmed correctly and you shouldn't have to many problems.. Hope the info helps.. Post back...
RC_Alan
RC_Alan
#2227
Tech Fanatic
Oh, the Red clutch shoes are very hard and look trick... but you really don't need them... Try the springs switch.... G4 stock, Yokomo stock and Yokomo hard.. Always have extra shims.. The clutch bell should spin freely.... Make sure everything is clean.. ie not oils or debris in there either... The clutch should never be to loose nor tight... I know you all know this... Just passing on the info for those who need it...
RC_Alan
RC_Alan
#2228
Just to let you know that Cameron Wagner finished 2nd in the sedan class at the fuel on-road nationals last week He used a team magic G4 !! Way to go Cams.
#2229
Red clutch shoe
were busy with this to fit the g4 clutch .
hope its finishd in 3 weeks for selling we have to make a few adj.
about the 710 clutch yes it will fit but the only problem are the gears to small only good for a short track the biggest 1st gear is 18-23 from serpent.
the kawahara clutch works also on the G4 - with the G4 clutch bell.
more easier to put on use the flywheel weights presurre plate and shoe rest G4
cya
hope its finishd in 3 weeks for selling we have to make a few adj.
about the 710 clutch yes it will fit but the only problem are the gears to small only good for a short track the biggest 1st gear is 18-23 from serpent.
the kawahara clutch works also on the G4 - with the G4 clutch bell.
more easier to put on use the flywheel weights presurre plate and shoe rest G4
cya
#2230
Has anyone tried the K-Factory Blue spring for TC3 on their car?
#2232
Kawahara clutch
this is the link
http://shop.the-border.nl/customer/p...73&cat=&page=1
so this is the last post for this week we go racing in Austria for th EC
cya
all next week
http://shop.the-border.nl/customer/p...73&cat=&page=1
so this is the last post for this week we go racing in Austria for th EC
cya
all next week
#2233
Tech Adept
hi rc-alan,
where can i get the yokomo springs for the clutch??
dieter
where can i get the yokomo springs for the clutch??
dieter
#2234
Tech Fanatic
4racer... Not sure where you're located... Most hobby shops carry them and should have them in stock... Or you can go to RCMart.com RCModel.com Tower hobbies or you can try TheBorderRC.com...
RC_Alan
RC_Alan
#2235
Rc_alan, what's going on man?? What care are you driving now? Have you given up on the G-4 yet? Sorry I don't frequent this bored very often. Try and guess who this is? Take care!