Protoform FRIZZBEE
#46
Tech Addict
iTrader: (2)
So being I got one before it was tweaked protofoum will send me a new one?
Now that would be customer support!
Now with all that out of the way mine did not push like a dump truck I did cut out the air reliefs behind the front wheels and cut out a section of the wing
great job dale,,, even thou i bought the 01 light wieght body great care was give to make sure the vacum molding didn't make the back of the car thin
Now that would be customer support!
Now with all that out of the way mine did not push like a dump truck I did cut out the air reliefs behind the front wheels and cut out a section of the wing
great job dale,,, even thou i bought the 01 light wieght body great care was give to make sure the vacum molding didn't make the back of the car thin
#48
updated shadow
how will we know the differents between the two in the lhs ?
#51
I got the chance to test one this past weekend, i realy liked the body, it had good balance plenty of steering, and was stable on the track, and it had good rear traction as well.The engine temps were consitent with other bodys ive run, no change. I could realy feel a difference with the speed of the car down the straights. I would recomend trying one when you can!
#52
will it have an EFRA number?
and when it will be available in europe...especially Italy
and when it will be available in europe...especially Italy
#53
Tech Regular
The last list of homologation is out and the body is not in you will need to wait until a new list is out.
Remember that this year is WC 1/8 onroad, and all the parts to be used like exhaust, bodies, insbox must be homologated.
I think it will not be able to be used on the WC nether on the European.
Have fun
#54
J-Man what car did you test the body on?
#55
#56
#57
#58
Are these fins ( marked circles ) have purpose in aerodynamics ?
Why not smooth out the fins ?
Why not smooth out the fins ?
#59
sorry, I forget the pics