Kyosho VoneR Thread
#2851
top speed
just wondering if anyone has an idea of exactly how fast their car is going, top speed-wise, and what engine are you using?
#2853
Originally posted by hooked_on
And Again!
And Again!
#2854
Tech Addict
iTrader: (1)
Originally posted by nova racer
Thats nothing mine went through a permeter bord at our track sunday when some iddiot turned on their raido. now if you run a sedan body i strongly sugest that you glue a couple of old tire inserts to the front bumper to keep the body from being pushed in from the air during racing and for frontal collisions. FTI, I used some HPI black inserts
Thats nothing mine went through a permeter bord at our track sunday when some iddiot turned on their raido. now if you run a sedan body i strongly sugest that you glue a couple of old tire inserts to the front bumper to keep the body from being pushed in from the air during racing and for frontal collisions. FTI, I used some HPI black inserts
#2855
I never had a problem before and a tire insert does not weigh that much. I use a old fashion fail safe called a throttle return spring lol.but the insert thing was to keep good arodynamics at high speed insted of the noes being pushed in it stays the consistant. I might get a fail safe but not until i have another crash that is the first time in 2 years since i raced off road
#2856
Originally posted by nova racer
I never had a problem before and a tire insert does not weigh that much. I use a old fashion fail safe called a throttle return spring lol.but the insert thing was to keep good arodynamics at high speed insted of the noes being pushed in it stays the consistant. I might get a fail safe but not until i have another crash that is the first time in 2 years since i raced off road
I never had a problem before and a tire insert does not weigh that much. I use a old fashion fail safe called a throttle return spring lol.but the insert thing was to keep good arodynamics at high speed insted of the noes being pushed in it stays the consistant. I might get a fail safe but not until i have another crash that is the first time in 2 years since i raced off road
#2857
If anybody is after replacement bearings for the V1R I can definately recommend the Blue Bearings available from ebay. I have had mine for 4-5 months, never serviced or removed them, and only 3 of them are a little gritty feeling. The rest are perfect. Also none have broken on the outer casing like the original Kyosho units. Lastly and best is that they are fully user servicable. You can remove and replace the shields and even remove/replace the cage.
I picked mine up for about $25 which is a steal.
I picked mine up for about $25 which is a steal.
#2858
Tech Master
Hello all Been a wile sice I have posted.
Here is my question:
I am useing Kawahara Zac project Foams, and I do like these tyres alot but with using a front one way I have found that the hex on the rim gets all worn out before the tyre wears out
Has any one used another brand of foam that works as well and has a better rim.
Thanks
Here is my question:
I am useing Kawahara Zac project Foams, and I do like these tyres alot but with using a front one way I have found that the hex on the rim gets all worn out before the tyre wears out
Has any one used another brand of foam that works as well and has a better rim.
Thanks
#2859
Originally posted by HEYALIGNMENTGUY
Hello all Been a wile sice I have posted.
Here is my question:
I am useing Kawahara Zac project Foams, and I do like these tyres alot but with using a front one way I have found that the hex on the rim gets all worn out before the tyre wears out
Has any one used another brand of foam that works as well and has a better rim.
Thanks
Hello all Been a wile sice I have posted.
Here is my question:
I am useing Kawahara Zac project Foams, and I do like these tyres alot but with using a front one way I have found that the hex on the rim gets all worn out before the tyre wears out
Has any one used another brand of foam that works as well and has a better rim.
Thanks
#2860
Tech Apprentice
hey
i got a few qusetions about the v1r
soon i might be selling my ob4 and gettin a v1r
and i wanna keep racing in the pull start class at my club
is there anyway to get a pull start in one? i saw a fella that did it but i cant find the page where he did it
and also what parts seem to break easyest?
thanks
ChriS
i got a few qusetions about the v1r
soon i might be selling my ob4 and gettin a v1r
and i wanna keep racing in the pull start class at my club
is there anyway to get a pull start in one? i saw a fella that did it but i cant find the page where he did it
and also what parts seem to break easyest?
thanks
ChriS
#2861
Originally posted by Manticore
i have been using "FAST" and "Ellegi" and i dont have problem with the hex wear problem ! the foam tire works well for me too !
i have been using "FAST" and "Ellegi" and i dont have problem with the hex wear problem ! the foam tire works well for me too !
beam up some tires to me "lo chan" , running low on tires...
the kid
#2862
Originally posted by ozzie boy
hey
i got a few qusetions about the v1r
soon i might be selling my ob4 and gettin a v1r
and i wanna keep racing in the pull start class at my club
is there anyway to get a pull start in one? i saw a fella that did it but i cant find the page where he did it
and also what parts seem to break easyest?
thanks
ChriS
hey
i got a few qusetions about the v1r
soon i might be selling my ob4 and gettin a v1r
and i wanna keep racing in the pull start class at my club
is there anyway to get a pull start in one? i saw a fella that did it but i cant find the page where he did it
and also what parts seem to break easyest?
thanks
ChriS
#2863
Originally posted by Data
beam up some tires to me "lo chan" , running low on tires...
the kid
beam up some tires to me "lo chan" , running low on tires...
the kid
#2864
Tech Master
Originally posted by Manticore
Let me BEAM BEAM my Lo Chan !!
Let me BEAM BEAM my Lo Chan !!
That's That's NASTY
#2865
Originally posted by HEYALIGNMENTGUY
That's That's NASTY
That's That's NASTY