Kodak Hodak

iTrader: (10)

anyone here tested the NEW pro front upper arm:

Motonica 05-116B Ergal Mount
Motonica 05-117B Ergal Mount

Do they provide better on power steering or off power steering?

Also i hear they sit lower than the standard plastic parts


Cheers
Frankie

garen

iTrader: (7)

The arm mounts are arriving now. I have not yet used them but I am not sure if they are any different than the stock mounts in terms of arm position.

Kodak Hodak

iTrader: (10)

Cheers Garren,

I thought they be more bling

staikosn1

Good evening racers...
Do you have any issues with drivetrain bearings?
I try to clean them 2 days and i cant make them work smooth, almost everyone has an issue!!
I think a bearing set ACER is a must for that car!

frodei

Do not have this problem on my p81 pro.

4th place in the first race with my car. had 3th in my pocket. but when we hade drive for 30 min my 2nd gear brok. 15 min with just 1st is a engien killer so a goth 4th.
Just a setup from Shasa Lacnkner. The car was i DREAM to drive

Kodak Hodak

iTrader: (10)

I replaced my bearings with Protek from amains - they seem to work better and smoother, thou i do run my bearing sin an ultrasonic cleaner, the apply nice fresh Huddy bearing Grease for lubrication!!!!

Give the bearings once cleaned and re-grease about 5-10mins on track and it rolls very nice and smooth.....

Just maintain the bearings on a regular basis just like any other part on the car.... keeping the car clean and fresh will always provide better life on all parts

Kodak Hodak

iTrader: (10)

NEW modification from Robin D'Hondt if no one knows who he is, run a search on REDRC website.... funny enough it helped with rear grip and gave some front end push..... thou i did run with 37 fronts


Only club days will tell if it helps with laptimes










Its worth a try

Kodak Hodak

iTrader: (10)

Parts i got from http://teamcracing.net

Part NUmbers:
VELOX SHEPHERD - 604314 x 1
VELOX SHEPHERD - 604313 x 1

Cheers
Frank
PS - Just email stefan
[email protected] to get price and shipping very cheap only around $20AUD

NOTE you will need to dremel part of the carbon ends and also you will need to get 6mm shock length ends for any 1/10th - 1/8th shocks... mod should cost no more than $25AUD

C Verano

iTrader: (1)

Congrats on your win this past weekend at the Kamikaze Race Garen!!

bvalistic

iTrader: (36)

+1

garen

iTrader: (7)

Thanks guys. Don, do you have the video of your P81E online yet?

bvalistic

iTrader: (36)

trying to figure it out how to download on youtube ...coming soon

garen

iTrader: (7)

Kamikaze race report (with an accurate depiction of how the main went) is posted here http://www.motonica-usa.com/news.html

bvalistic

iTrader: (36)

here's the video link:

http://www.youtube.com/watch?v=_jwldSNT7cI

williamw

iTrader: (5)

That car was fast off the corners!