Ntc3 Gears!!!
 

HI I JUST BOUGHT A NTC3 WITH TWO SPEED TRANSSMISION AND I WANTED TO CHANGE THE GEARS TO MAKE IT GO FASTER INSTEAD OF BUYING A NEW ENGINE BUT I DONT KNOW ANYTHING ABOUT GEARING IS THERE A SPECIFIC COMBINATION THAT I WOULD HAVE TO USE OR DO MOST PEOPLE JUST TRY DIFFERENT COMBINATIONS,THE TRACK I RUN AT IS PRETTY BIG SO I WANTED A MIX OF FAST ACCELERATION OF THE LINE BUT I ALSO WANTED HIGH SPEED DOWN THE STRAIGHT,I HAVE THE STOCK 50TOOTH & 54TOOTH SPUR GEARS WITH THE STOCK 26TOOTH PINION & 22TOOTH PINION CLUTHC BELL.
ANY HELP WOULD BE GREATLY APPRECIATED.
THANK YOU!

You can go either with a four tooth spread or a six tooth spread. For really BIG tracks try a six tooth spread ( 54/48 ) spur and (27/21) pinions. It also depends on track set-up. If its a small track with lots of corners, then go (54/50) spur and ( 20/24 ) pinions. I used alot of 54/50; 25/21 on most tracks here in northern calif. Hope this helps.

20/26 48/54 eveywear let hp do the rest

Does anyone know all the gearing combos that would work the NTC3?

Thanks Jason

hey IM me or something ill send you the Gear chart. TheNiceAzn for AIm
[email protected] for e-mail or YM