Mugen MTX-4R
#3362
It still dominates one of my local tracks also, speedworld in Sac......
#3363
Too bad ..... only 3 mtx4 left active in my hometrack.
[ and 1 mtx3 if I decided to go racing with it ].
The rest are using NT1 and RRR EVO.
However for 1/8 racing scene, about 20 cars are Mugen Seiki MRX4, R, X.
[ and 1 mtx3 if I decided to go racing with it ].
The rest are using NT1 and RRR EVO.
However for 1/8 racing scene, about 20 cars are Mugen Seiki MRX4, R, X.
#3365
#3368
Tech Elite
iTrader: (4)
It use to be MTX country here in Texas for a while. Then everyone jumped ship to Kyosho. Now, they jumped ship to Xray due to RC America being here in Dallas (where I currently live). The MTX-4/4R still holds its own against the NT1, but only three racers on the Texas circuit still run Mugen (myself included).
#3369
It use to be MTX country here in Texas for a while. Then everyone jumped ship to Kyosho. Now, they jumped ship to Xray due to RC America being here in Dallas (where I currently live). The MTX-4/4R still holds its own against the NT1, but only three racers on the Texas circuit still run Mugen (myself included).
#3370
Tech Elite
iTrader: (4)
Mine is actually a MTX-4 from the first batch that they sent to the states when the car came out. Mine is basically bone stock except for the front CVDs and the aluminum brace on the right side above the clutch bell. Many of my fellow racers are amazed that I can hang with them (when I am not making a ton of mistakes) with a bone stock car (many of theirs have tons of hop-ups on them no matter what brand they run). I just like the fact that you can run an out-of-box Mugen cheaper than many of their competitors (which leaves more money for fuel and race engines).
Last edited by JLock; 11-05-2009 at 06:48 AM.
#3372
Can anyone give a good setup for the Kissimmee track in florida.
#3374
the differences are : front axle outdrives (2) , and mtx4 front diff box housing (1 bag consist of pulleys, front diff and rear diff ).
...... I have brand new zac kawahara front oneway multi diff system [ solid oneway, normal oneway, spool ] for sale if anyone interested.