RB X-12Rody #215
#1
RB X-12Rody #215
has any one running this engine yet??
if so any feed back for this engine??
cheers
if so any feed back for this engine??
cheers
#3
Re: RB X-12Rody #215
Originally posted by T-shirt
has any one running this engine yet??
if so any feed back for this engine??
has any one running this engine yet??
if so any feed back for this engine??
All of them are real good engines, with lots of low-end and very reliable I'll use on racing without problems. I real tough to beat for the rest of engines, you only need to get tune with the powerband of ths engine (slightly different than other and may change your gearing).
Depending your local rules, 215 model should be illegal (keep an eye to this). But if in doubt between 215 w/conical plug head and the 235 model. Get the 215 model, is slightly more powerful.
#4
Tech Adept
hi guys,
what is the safe setting for the high speed needle for this engine?
how many turns from close?
what is the safe setting for the high speed needle for this engine?
how many turns from close?
#5
its like most motors, depends on day wheather humidity temp sea level etc, but i have novarossi motors and they are the same carb and i run mine flush with outer top with any where to one turn in, depends alot on pipe and plug and fuels.
#6
darthkir go to the RB web site and check out the HSN and LSN settings. They say if you lose the factory presets start HSN at 5 turns out and LSN at 2.5 turn out, idle with a 0.6mm air gap